Introduction: The BX165N robot has a maximum arm span of 2325mm with a payload of 165 kg, and the optimized body shop robot can be equipped with a large welding gun, with built-in cables, and a medium-long range of action, even in high-density configurations.
Features:
High-speed spot welding
By reducing the weight of the arm, using a high-output true rotary motor, and a new anti-vibration control, the short pitch operation time, which accounts for the main part of the spot welding operation, has been shortened, and the cycle time has been greatly reduced by improving the gun shaft operation sequence of the welding gun.
Built-in cable, air hose
By installing a hollow part in the center of the upper arm and hand yard, it is possible to build cables and air tubes from the base of the robot to the end of the peacock. As a result, there is no need to consider the interference between the cables and the air pipes of the adjacent robot or peripheral equipment due to the external winding method during offline teaching or after the robot is installed. At the same time, the efficiency of offline and on-site teaching operations has also been greatly improved.
Increased installation freedom
Since the installation area and body size are greatly reduced compared to conventional models, the robot can be installed at a high density while the cables and air hose are built-in.
Product parameters
Arm type: Multi-articulated robot
Degrees of freedom (axis): 6
Maximum load capacity (kg): 165
Maximum Reach (mm): 2,325
Repeatability (mm) ✽1:±0.06
Range of action (°)
Arm rotation (JT1): ±160
Anterior arm (JT2): +76 - -60
Arm up and down (JT3): +90 - -75
Wrist rotation (JT4): ±210
Wrist flexion (JT5): ±125
Wrist torsion (JT6): ±210
Maximum speed (°/s)
Arm rotation (JT1): 105
Anterior and posterior arms (JT2): 130
Arm up and down (JT3): 130
Wrist rotation (JT4): 120
Wrist flex (JT5): 160
Wrist twist (JT6): 300
Allowable load torque (N•m)
Wrist rotation (JT4): 930
Wrist flex (JT5): 930
Wrist Twist (JT6): 490
Permissible load inertia (kg•m2)
Wrist rotation (JT4): 99
Wrist flexion (JT5): 99
Wrist torsion (JT6): 49.5
Weight (kg): 875
Installation: ground
Installation conditions: ambient temperature (°C): 0 - 45
Relative humidity (%) :35 - 85 (no condensation)
Control cabinet / power supply required (kVA): E02 / 7.5
Degree of protection: Wrist: IP67 equivalent Pedestal: IP54 equivalent
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action, and every day of service are professional and careful, can we meet or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces the Kawasaki/Kawasaki 6-axis robot BX165N with an arm span of 2325mm products, if you are interested in the Kawasaki/Kawasaki robot, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
Kawasaki/Kawasaki painting robot KJ155 6-axis with an arm span of 1545mm
Introduction: The KJ155 robot is a small painting robot with a hollow wrist of φ50mm, which can cope with small rotary cups. Built-in pipelines make it easy to build piping schemes. The body weight is less than 200 kg, the left and right sides are symmetrical, and the lateral area is small, so it can be painted in a narrow field.
...
|
|
Kawasaki YF002N load 2kg operating range ø600×H200mm
Introduction: Kawasaki Parallel Robot [Y Series] is a high-speed sorting robot, which can be widely used in the production line of food, medicine, cosmetics and the assembly of solar panels. The YF002N is lightweight and can be easily set up in tight spaces.
features
Processing power ...
|
|
Kawasaki/Kawasaki Painting Robot KJ125 Load Wrist 8 kg Arm 5 kg
Introduction: The KJ125 robot is a small painting robot with a hollow wrist of φ50mm, which can cope with small rotary cups. Built-in pipelines make it easy to build piping schemes. The body weight is less than 200 kg, the left and right sides are symmetrical, and the lateral area is small, so it can be painted in a narrow field.
...
|
|
Kawasaki/Kawasaki E Control Cabinet Storage capacity 8MB
Introduction: E control cabinet has more accurate trajectory control and high-speed program execution of high-speed CPU, so that data storage and loading can be completed quickly. The expansion of memory capacity has led to a significant increase in the amount of programs that can be stored. As an external storage device, USB storage can also be used.
...
|
|
Kawasaki/Kawasaki large-payload robot BX165L 6-axle weighs 890kg
Introduction: The BX165L robot is a high-speed robot with built-in cables that can replace existing robots and can replace existing robots.
Product parameters
Arm Type: ...
|
|
Kawasaki/Kawasaki Robot BX250L Load 250kg Weight 1460kg
Introduction: With a payload of 250kg and a weight of 1460kg, the Kawasaki/Kawasaki Robot BX250L is an optimized body shop robot and a high-speed robot with a built-in cable with a wide range of movements and a powerful handling capacity.
Give birth...
|
|
Kawasaki/Kawasaki painting robot KJ314 wall mounted 7-axis with an arm span of 3100mm
Introduction: KJ314 wall-mounted robot - 7 axes with a large hollow inner diameter wrist of φ70, can be equipped with a spraying machine on the upper part of the arm, is a lightweight explosion-proof spraying robot with built-in cables, and has a wide range of action, can cope with large workpieces. With a seventh axis, it can achieve a wider range of motion ...
|
|
Kawasaki/Kawasaki Robot RS080N Load 80kg Reach 2100mm
Introduction: The R-Series robots set the benchmark for all small and medium-sized industrial robots. The compact design and outstanding speed, reach and working range make the R-Series robots suitable for a wide range of applications in many different industries.
...
|
|
Kawasaki/Kawasaki Clean Robot NTS Series Reach 1066mm
Introduction: The NTS series can be used with one robot to support EFEM from 2 FOUP to 3 FOUP without a walking device. Equipped with a drive part developed in-house by Kawasaki, it is capable of high-precision and high-rigidity operation.
Products...
|
|
Kawasaki/Kawasaki Robot BX200L Load 200kg Arm Span: 2597mm
Introduction: BX200L robot load 200kg maximum arm span of 2597mm, optimized body shop robot can replace the existing robot, is a built-in cable, and can cope with large welding guns from the high-speed robot.
...
|
|
Kawasaki/Kawasaki Painting Robot KF121 with a payload of 5 kg and an arm span of 1240 mm
Description: The K series of coating robots combines powerful programming flexibility with high running performance. The KF121 is the smallest explosion-proof coating robot in the K series, and it can easily handle everything from the coating of small items to the handling of special explosion-proof environments.
...
|
|
Kawasaki/Kawasaki Robot RS007N Load 7kg Arm span 730mm
Introduction: The R-Series robots set the benchmark for all small and medium-sized industrial robots. The compact design and outstanding speed, reach and working range make the R-Series robots suitable for a wide range of applications in many different industries.
...
|
|
Kawasaki/Kawasaki welding robot BX100S payload 100 kg
Introduction: The smallest robot in the BX series, with built-in cables, is more suitable for setting up small and lightweight welding guns and high-density configurations where the robot is installed around the workpiece.
Product parameters
Arm type: Multi-articulated robot
...
|
|
Kawasaki/Kawasaki palletizing robot CP180L 4-axis with an arm span of 3255mm
Introduction: CP180L robot is a new high-speed and powerful palletizing robot, with a high-speed palletizing robot with outstanding handling level. It can meet the needs of a wide range of industries such as food, pharmaceuticals, and printed matter in small quantities. It is the lightest weight in its range and is most suitable for improving palletizing efficiency.
...
|
|
Kawasaki/Kawasaki Robot BX130X Payload 130kg Weight 920kg
Introduction: With a payload of 130 kg and a weight of 920 kg, the BX130X robot is an optimized body shop robot and a high-speed robot with built-in cables, which can handle everything from small and lightweight welding guns to medium-sized welding guns.
Features:
High speed...
|
|
Kawasaki/Kawasaki XL350L Extra Payload Robot with a payload of 350kg
Introduction: Based on rich experience and technology, the MX series of large-scale heavy load handling robots has been developed. It has a load of 350 kg and a large working range of 3,018 mm. Kawasaki's original equipment is used to carry large loads in a compact body.
...
|
|
Kawasaki/Kawasaki 6-axis robot BX300L with an arm span of 2812mm
Introduction: The B series of fuselage workshop robots is developed using Kawasaki's mature and advanced technology and rich experience in the automation industry to improve the performance to a new level. The rugged and lightweight, ultra-slim design meets the quest for functionality, flexibility and investment efficiency ...
|
|
Kawasaki/Kawasaki Articulated Robot CX210L with a payload of 210kg
Introduction: Kawasaki CX210L adopts the international advanced robot design concept, absorbs the international advanced core components, and combines the actual needs of users. After rigorous experimental testing, the high safety, reliability and stability of the system are ensured. The CX210L system is an efficient ...
|
|
Kawasaki/Kawasaki Robot RS050N Load 50kg Reach 2,100mm
Introduction: The R-Series robots set the benchmark for all small and medium-sized industrial robots. The compact design and outstanding speed, reach and working range make the R-Series robots suitable for a wide range of applications in many different industries.
...
|
|
Kawasaki/Kawasaki Robot MX420L Load 420kg Reach 2778mm
Introduction: Based on rich experience and technology, the MX series of large-scale heavy load handling robots has been developed. It has a 420kg payload and a working range of 2,778mm. Kawasaki's original equipment is used to carry large loads in a compact body.
...
|
|
Contact
working hours
