Introduction: BX200L robot load 200kg maximum arm span of 2597mm, optimized body shop robot can replace the existing robot, is a built-in cable, and can cope with large welding guns from the high-speed robot.
Features:
High-speed spot welding
By reducing the weight of the arm, using a high-output true rotary motor, and a new anti-vibration control, the short pitch operation time, which accounts for the main part of the spot welding operation, has been shortened, and the cycle time has been greatly reduced by improving the gun shaft operation sequence of the welding gun.
Built-in cable, air hose
By installing a hollow part in the center of the upper arm and hand yard, it is possible to build cables and air tubes from the base of the robot to the end of the peacock. As a result, there is no need to consider the interference between the cables and the air pipes of the adjacent robot or peripheral equipment due to the external winding method during offline teaching or after the robot is installed. At the same time, the efficiency of offline and on-site teaching operations has also been greatly improved.
Increased installation freedom
Since the installation area and body size are greatly reduced compared to conventional models, the robot can be installed at a high density while the cables and air hose are built-in.
Product parameters
Arm type: Multi-articulated robot
Degrees of freedom (axis): 6
Maximum load capacity (kg): 200
Maximum Reach (mm): 2,597
Repeatability (mm) ✽1:±0.06
Range of action (°)
Arm rotation (JT1): ±160
Anterior arm (JT2): +76 - -60
Arm up and down (JT3): +90 - -75
Wrist rotation (JT4): ±210
Wrist flexion (JT5): ±125
Wrist torsion (JT6): ±210
Maximum speed (°/s)
Arm rotation (JT1): 105
Anterior arm (JT2): 90
Arm up and down (JT3): 100
Wrist rotation (JT4): 120
Wrist flexion (JT5): 120
Wrist twist (JT6): 200
Allowable load torque (N•m)
Wrist rotation (JT4): 1,334
Wrist flexion (JT5): 1,334
Wrist torsion (JT6): 588
Permissible load inertia (kg•m2)
Wrist rotation (JT4): 199.8
Wrist flex (JT5): 199.8
Wrist torsion (JT6): 154.9
Weight (kg): 890
Installation: ground
Installation conditions: ambient temperature (°C): 0 - 45
Relative humidity (%) :35 - 85 (no condensation)
Control cabinet / power supply required (kVA): E02 / 7.5
Degree of protection: Wrist: IP67 equivalent Pedestal: IP54 equivalent
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action, and every day of service are professional and careful, can we meet or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces the Kawasaki/Kawasaki robot BX200L load 200kg arm span 2597mm product, if you are interested in the Kawasaki/Kawasaki robot, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
Kawasaki/Kawasaki arc welding robot RA005L with a payload of 5kg and an arm span of 903mm
Introduction: RA005L arm is a small, skilled and flexible arc welding robot, which is more suitable for the welding of small items. From the day of the introduction of the Kawasaki arc welding robot, it can be comparable to the welding quality of a skilled welder.
Products...
|
|
Kawasaki/Kawasaki MX500N Mega Payload Robot with a 2540mm reach
Introduction: Based on rich experience and technology, the MX series of large-scale heavy load handling robots has been developed. It has a load of 500 kg and a working range of 2,540 mm. Kawasaki's original equipment is used to carry large loads in a compact body.
...
|
|
Kawasaki/Kawasaki Robot RS010N Load 10 kg Weight 150 kg
Introduction: The R-Series robots set the benchmark for all small and medium-sized industrial robots. The compact design and outstanding speed, reach and working range make the R-Series robots suitable for a wide range of applications in many different industries.
...
|
|
Kawasaki/Kawasaki arc welding robot BA006N with a payload of 6kg and an arm span of 1445mm
Introduction: The wrist hollow structure that is widely praised in the large-scale [B series] robot for spot welding. This makes it easier to organize cables, and the processing of welding wire supply devices and cables is also easier, and it is easier to discuss and deal with offline while realizing a stable supply of welding wire.
...
|
|
Kawasaki/Kawasaki Painting Robot KJ264 has an arm span of 2640mm
Introduction: The KJ264 bracket robot has a large hollow inner diameter wrist of φ70, which can be equipped with a spraying machine on the upper part of the arm, and is a lightweight explosion-proof spraying robot with built-in cables and a wide range of motion, which can cope with large workpieces.
...
|
|
Kawasaki/Kawasaki Robot MC004V has a horizontal reach of 506mm
Introduction: With the increasing prominence of the aging problem, the demand for new drugs is also increasing. There is a risk of operator error or contamination of microorganisms during manual work in pharmaceutical · medical sites, and there is also a risk of radiation to the human body from the storage of highly pharmacologically active pharmaceuticals such as anticancer agents. To avoid ...
|
|
Kawasaki/Kawasaki Carrier Robot MT400N has an arm span of 3503mm
Introduction: Based on rich experience and technology, the scaffolded large heavy load handling robot MT400N is developed. It is suitable for up and down work with a maximum operating range of 3,503 mm (horizontal) and 4,319 mm (vertical). Using Kawasaki's separately developed equipment, the compact body ...
|
|
Kawasaki/Kawasaki welding robot BT200L with a load of 200kg and a weight of 1100kg
Introduction: The B series of body shop robots are developed using Kawasaki's mature and advanced technology and rich experience in the automation industry, which takes the performance to a new level. The rugged and lightweight, ultra-slim design meets the quest for functionality, flexibility and investment efficiency ...
|
|
Kawasaki/Kawasaki Arc Welding Robot RA006L Repeatability ± 0.03mm
Introduction: RA006L robot's skilled and flexible arc welding robot, from the day of the introduction of Kawasaki arc welding robot, can be comparable to the welding quality of a skilled welder.
Features:
No hassle required!
...
|
|
Kawasaki/Kawasaki 6-axis arc welding robot RA010N with an arm span of 1450mm
Introduction: RA010N robot's skilled and flexible arc welding robot, from the day of the introduction of Kawasaki arc welding robot, can be comparable to the welding quality of a skilled welder.
Features:
No hassle required!
...
|
|
Kawasaki/Kawasaki Painting Robot KF192 Payload 12kg Weight 690kg
Description: The K series of coating robots combines powerful programming flexibility with high running performance. The KF192 robot has a BBR-type wrist that is easy to spray on frontal · flat surfaces, and is a space-saving small-area explosion-proof spraying robot.
...
|
|
Kawasaki/Kawasaki Robot RS030N Load 30kg Weight 555kg
Introduction: The R-Series robots set the benchmark for all small and medium-sized industrial robots. The compact design and outstanding speed, reach and working range make the R-Series robots suitable for a wide range of applications in many different industries.
...
|
|
Kawasaki/Kawasaki Robot MX420L Load 420kg Reach 2778mm
Introduction: Based on rich experience and technology, the MX series of large-scale heavy load handling robots has been developed. It has a 420kg payload and a working range of 2,778mm. Kawasaki's original equipment is used to carry large loads in a compact body.
...
|
|
Kawasaki/Kawasaki Robot RS020N Load 20kg Reach 1,725mm
Introduction: The R-Series robots set the benchmark for all small and medium-sized industrial robots. The compact design and outstanding speed, reach and working range make the R-Series robots suitable for a wide range of applications in many different industries.
...
|
|
Kawasaki/Kawasaki welding robot BX200X with a load of 200kg and an arm span of 3412 mm
Introduction: The Kawasaki BX200X robot, an optimized body shop robot, can replace the existing robot, is a high-speed robot with built-in cables and can cope with large welding guns.
Product parameters
...
|
|
Kawasaki/Kawasaki Control Cabinet D61 Semiconductor Robot Max12-axis
Introduction: D Control Cabinet (Semiconductor Robot) A control cabinet for semiconductor robots that corresponds to one arm of the D60 and two arms of the D61. The compact D60 can control up to 7 axes, and the D61 can control 12 axes. The control cabinet for worldwide use meets both SEMI and CE standards.
...
|
|
Kawasaki/Kawasaki Robot RS050N Load 50kg Reach 2,100mm
Introduction: The R-Series robots set the benchmark for all small and medium-sized industrial robots. The compact design and outstanding speed, reach and working range make the R-Series robots suitable for a wide range of applications in many different industries.
...
|
|
Kawasaki/Kawasaki Articulated Robot CX210L with a payload of 210kg
Introduction: Kawasaki CX210L adopts the best robot design concept, absorbs the core components of the world, and combines the actual needs of users. After rigorous experimental testing, the high safety, reliability and stability of the system are ensured. The CX210L system is an efficient handling robot.
...
|
|
Kawasaki/Kawasaki Clean Robot NTS Series Reach 1066mm
Introduction: The NTS series can be used with one robot to support EFEM from 2 FOUP to 3 FOUP without a walking device. Equipped with a drive part developed in-house by Kawasaki, it is capable of high-precision and high-rigidity operation.
Products...
|
|
Kawasaki/Kawasaki welding robot BX100S payload 100 kg
Introduction: The smallest robot in the BX series, with built-in cables, is more suitable for setting up small and lightweight welding guns and high-density configurations where the robot is installed around the workpiece.
Product parameters
Arm type: Multi-articulated robot
...
|
|
Contact
working hours
