Introduction: The R-Series robots set the benchmark for all small and medium-sized industrial robots. The compact design and outstanding speed, reach and working range make the R-Series robots suitable for a wide range of applications in many different industries.
Features:
** Speed
By reducing the weight of the arm and using a small motor with high output and high rotational speed, the means have greatly improved the maximum speed and acceleration. In addition, the acceleration is changed according to the load weight and posture, thus ensuring the best performance of the robot at all times and significantly reducing the cycle time.
Small wrist and powerful torque
This makes the wrist more compact, allowing for more flexibility in tight spaces. We have encountered small motors with high output and high speed. Strengthen the rigidity of the robotic arm, etc. Wrist load capacity has been improved. Manipulator. The selection of tools and workpiece shapes has been expanded.
Greater range of motion
By expanding the reach and travel of each axis, the movement area under and near the robot is also enlarged, allowing for more flexible layouts.
High adaptability to the environment
Each section is a double sealed structure, using waterproof connectors, achieving P67 and IP65 protection for the base shaft. (excluding RS003N)
High scalability
Internal valves and sensor harnesses are available as optional equipment, making them easy to use and install a wide range of peripherals. In addition, maintenance holes are included as standard on each part of the arm to facilitate the addition of assembly lines and piping.
Product parameters
Arm type: Multi-articulated robot
Degrees of freedom (axis): 6
**Large load capacity (kg): 7
**Large Reach (mm): 930
Repeatability (mm) ✽1:±0.03
Range of action (°)
Arm rotation (JT1): ±180
Anterior and posterior arms (JT2): ±135
Arm Up and Down (JT3): ±157
Wrist rotation (JT4): ±200
Wrist flexion (JT5): ±125
Wrist torsion (JT6): ±360
**High speed (°/s)
Arm rotation (JT1): 370
Anterior arm (JT2): 310
Arm up and down (JT3): 410
Wrist rotation (JT4): 550
Wrist flex (JT5): 550
Wrist twist (JT6): 1,000
Allowable load torque (N•m)
Wrist rotation (JT4): 17
Wrist flexion (JT5): 17
Wrist Twist (JT6): 10
Permissible load inertia (kg•m2)
Wrist rotation (JT4): 0.5
Wrist flex (JT5): 0.5
Wrist torsion (JT6): 0.2
Weight (kg): 36
Installation: ground, hanging
Installation conditions: ambient temperature (°C): 0 - 45
Relative humidity (%) :35 - 85 (no condensation)
Control cabinet / power supply required (kVA): F60 / 2.0
Degree of protection: Wrist: IP67 equivalent Base: IP65 equivalent
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only by being professional and careful in every process, every action and every detail of the service can we meet or even exceed customer expectations and make customers satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces the Kawasaki/Kawasaki robot RS007L load 7kg arm span 930mm product, if you are interested in Kawasaki/Kawasaki robot, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
Kawasaki/Kawasaki Robot BX100L has an arm span of 2,597 mm
Introduction: The BX100L robot's optimized body shop robot can be used to replace existing robots, and is a high-speed robot with built-in cables that can handle everything from small and lightweight welding guns to medium-sized welding guns.
Product parameters
Hand...
|
|
Kawasaki/Kawasaki arc welding robot RA010L with a payload of 10kg and an arm span of 1925mm
Introduction: Kawasaki RA010L robot's skilled and flexible arc welding robot can be comparable to the welding quality of a skilled welder from the day of the introduction of Kawasaki arc welding robot. It has a large operating range of 1925 mm and can be used for large workpieces.
...
|
|
Kawasaki/Kawasaki welding robot BX200X with a load of 200kg and an arm span of 3412 mm
Introduction: The Kawasaki BX200X robot, an optimized body shop robot, can replace the existing robot, is a high-speed robot with built-in cables and can cope with large welding guns.
Product parameters
...
|
|
Kawasaki/Kawasaki Robot ZX165U 165 Kg 2651 mm
Introduction: ZX165U large general robot has a wide range of achievements in various industries and applications; There is no motor on the wrist, which can work in harsher environments; It can cover a wide range of rotation of 360°.
Product Details
...
|
|
Kawasaki/Kawasaki 6-axis robot BX300L with an arm span of 2812mm
Introduction: The B series of fuselage workshop robots is developed using Kawasaki's mature and advanced technology and rich experience in the automation industry to improve the performance to a new level. The rugged and lightweight, ultra-slim design meets the quest for functionality, flexibility and investment efficiency ...
|
|
Kawasaki/Kawasaki Robot RS020N Load 20kg Reach 1,725mm
Introduction: The R-Series robots set the benchmark for all small and medium-sized industrial robots. The compact design and outstanding speed, reach and working range make the R-Series robots suitable for a wide range of applications in many different industries.
...
|
|
Kawasaki/Kawasaki Control Cabinet F60 8.3kg 6-axis control number
Introduction: The concentration of control cabinet parts· the reduction of small · weight and the optimization of parts have reduced the size and weight of the control cabinet by 77% and 72% compared with the previous Kawasaki model, and achieved miniaturization. Therefore, it can be stored on a 19-inch stand and can be stacked.
|
|
Kawasaki/Kawasaki welding robot BT200L with a load of 200kg and a weight of 1100kg
Introduction: The B series of body shop robots are developed using Kawasaki's mature and advanced technology and rich experience in the automation industry, which takes the performance to a new level. The rugged and lightweight, ultra-slim design meets the quest for functionality, flexibility and investment efficiency ...
|
|
Kawasaki/Kawasaki's dual-wrist positioning robot duAro2 carries 3kg of each arm
Introduction: Kawasaki's innovative two-wrist SCARA robot duAro can work together with humans in the same space. The up-down stroke has been expanded from 150 mm to 550 mm, making it possible to seal very deep boxes, greatly expanding the range of applications. In addition, the load has been increased from 2kg to ...
|
|
Kawasaki/Kawasaki Arc Welding Robot RA006L Repeatability ± 0.03mm
Introduction: RA006L robot's skilled and flexible arc welding robot, from the day of the introduction of Kawasaki arc welding robot, can be comparable to the welding quality of a skilled welder.
Features:
No hassle required!
...
|
|
Kawasaki/Kawasaki MX500N Mega Payload Robot with a 2540mm reach
Introduction: Based on rich experience and technology, the MX series of large-scale heavy load handling robots has been developed. It has a load of 500 kg and a working range of 2,540 mm. Kawasaki's original equipment is used to carry large loads in a compact body.
...
|
|
Kawasaki/Kawasaki Robot RS007N Load 7kg Arm span 730mm
Introduction: The R-Series robots set the benchmark for all small and medium-sized industrial robots. The compact design and outstanding speed, reach and working range make the R-Series robots suitable for a wide range of applications in many different industries.
...
|
|
Kawasaki/Kawasaki Robot RS030N Load 30kg Weight 555kg
Introduction: The R-Series robots set the benchmark for all small and medium-sized industrial robots. The compact design and outstanding speed, reach and working range make the R-Series robots suitable for a wide range of applications in many different industries.
...
|
|
Kawasaki/Kawasaki arc welding robot BA006L with an arm span of 2036 mm
Introduction: BA006L Robot Skilled and Flexible Arc Welding Robot, Six-Axis Robotic Arm Robot, Automatic Welding Robot, Welding Workstation, Positioner, Ground, Hanging Installation, Ambient Temperature of 0 - 45°C.
Product parameters
...
|
|
Kawasaki/Kawasaki MS005N Robot The maximum reach is 660mm
Introduction: With the increasing prominence of the aging problem, the demand for new drugs is also increasing. There is a risk of operator error or contamination of microorganisms during manual work in pharmaceutical · medical sites, and there is also a risk of radiation to the human body from the storage of highly pharmacologically active pharmaceuticals such as anticancer agents. To avoid ...
|
|
Kawasaki/Kawasaki arc welding robot RA005L with a payload of 5kg and an arm span of 903mm
Introduction: RA005L arm is a small, skilled and flexible arc welding robot, which is more suitable for the welding of small items. From the day of the introduction of the Kawasaki arc welding robot, it can be comparable to the welding quality of a skilled welder.
Products...
|
|
Kawasaki/Kawasaki arc welding robot BA006N with a payload of 6kg and an arm span of 1445mm
Introduction: The wrist hollow structure that is widely praised in the large-scale [B series] robot for spot welding. This makes it easier to organize cables, and the processing of welding wire supply devices and cables is also easier, and it is easier to discuss and deal with offline while realizing a stable supply of welding wire.
...
|
|
Kawasaki/Kawasaki Paint Robot KF262 Spraying speed 1.2m/s
Introduction: K series painting robot combines strong programming flexibility and high running performance, KF262 robot has a BBR-shaped wrist that is convenient for frontal · surface spraying, and is a space-saving small area explosion-proof spraying robot.
...
|
|
Kawasaki/Kawasaki painting robot KJ314 wall mounted 7-axis with an arm span of 3100mm
Introduction: KJ314 wall-mounted robot - 7 axes with a large hollow inner diameter wrist of φ70, can be equipped with a spraying machine on the upper part of the arm, is a lightweight explosion-proof spraying robot with built-in cables, and has a wide range of action, can cope with large workpieces. With a seventh axis, it can achieve a wider range of motion ...
|
|
Kawasaki/Kawasaki 6-axis robot BX165N with a 2325mm reach
Introduction: The BX165N robot has a maximum arm span of 2325mm with a payload of 165 kg, and the optimized body shop robot can be equipped with a large welding gun, with built-in cables, and a medium-long range of action, even in high-density configurations.
Give birth...
|
|
Contact
working hours
