Pilz won the China Machinery Industry Science and Technology Award

The safety radar system PSENradar is a safe area protection monitoring device based on FMCW radar technology launched by Pilz, which is different from traditional area protection monitoring sensors, PSENradar is not easily affected by the external environment and is suitable for safe area protection monitoring under harsh conditions. ...

1. The difference between the structure of current relay and voltage relay The main thing is that the coils are different. The coil of the current relay is connected in series with the load to reflect the load current, so its coil turns are small and the wire is thick, so that the voltage drop when passing through the current is very small, and it will not affect the load circuit.

1. When the emergency stop is lifted, the machine cannot be suddenly restarted 2. In case of failure of the machine safety circuit, the power supply of the machine can be stopped 3. When the safety circuit fails, the machine can no longer be started Confirm safe input such as safety switches, light curtains, etc.

1. The relationship between the specifications of the relay and the installation location For different star/triangle control positions, the specifications of the selected thermal relays are also different. As shown in Figure 1, the current setting value of the selected thermal relay is equal to the rated current value of the protected motor. In Fig. 2, the selected thermal relay ...

Pilz safety relays generally consist of an iron core, a coil, an armature, a contact reed, etc. As long as a certain voltage is added to both ends of the coil, a certain current will flow through the coil, resulting in an electromagnetic effect. Under the action of electromagnetic attraction, the armature overcomes the pulling force of the return spring and sucks in the iron ...

The naming of solid state relay models has not been unified, and the following conditions should be considered when selecting the manufacturer's manual. (1) Rated input voltage Refers to the maximum allowable effective voltage of a steady-state resistive load that can be withstood under a given condition. When used for inductive loads ...

1) Larger shape: The safety relay is different from the ordinary relay, and the safety relay is larger. 2) Modules instead of components: A safety relay is a module, not an electronic component like a normal relay. 3) Red and yellow: The safety relay has ...

When using Pilz safety gate switches in series, the following points need to be noted: 1. The installation position of the switch must meet the design requirements of the safety gate control system to ensure that no accidents will occur during operation. 2. When connecting the circuit, it should be in accordance with the ...

The new maintenance system "key in pocket" from Pilz prevents the risk of unauthorised machine restarts and increases the safety of maintenance work. Digital maintenance assurance is based on the access authorization system PITreader, which ensures the safety of machinery and industrial information.

Pilz supports manufacturers and operators of packaging machines in the implementation of packaging automation. As a well-known and trusted provider of machinery safety services to companies worldwide. Use the myPNOZ modular safety relays The first ...

1. Some common faults of high-voltage relay coils 1. The common fault cause of the coil is often disconnected: whether the ultrasonic wave is used to clean the high-voltage relay, or whether the overvoltage is added to the coil will also promote the probability of the coil being disconnected. 2 ...

Pilz's modular safety relay myPNOZ has received a lot of attention and acceptance since its introduction. It has been nominated for the Hermes Award, the Germany Innovation Award (GIA) and the Red Dot Design Award. This safety app, which can be customized and mass-produced according to user requirements, can be customized according to user requirements.

1. 3-pin relay wiring The common 3-pin relay is the car horn relay. No. 1 is the contact terminal, which connects the load; No. 2 is the common terminal between the contact and the coil, which is connected to the power supply; No. 3 is the coil terminal, which connects the button switch (such as the horn on the steering wheel).

Adhering to the motto "Weautomate.Safely." From April 1 to 5, 2019, Pilz will once again present innovative automation solutions at the Hannover Messe in Hall 9, Stand D17. As a safe automation ...

　　1. The same module can be triggered by high or low level through different wiring, and the trigger current is not less than 1mA, and the output capacity of the IO port of some 51 single-chip microcomputers is weak, and the circuit of pulling up or increasing the driving capacity is required (the default is low level triggering); 2. Advantages of low-level drive, ...

1. Y0 is connected to one end of the coil A1 of KA1; 2. The other end of KA1, A2, is connected to 24V; 3. Y1 is connected to A1 at one end of the coil of KA2; 4. The other end of KA2 A2 is connected to 24V; 5. COM terminated to 24V. ...

Smart factories, Industry 4.0 and autonomous production – the mechanical engineering department is now looking forward to a bright future. The pace of innovation and ever-shortening development moments are playing an increasingly important role in the global race. To streamline the engineering process and add reusability to individual components, the regulations ...

On March 1, 2023, the National Printing Machinery Standardization Annual Conference and the First National Coating Machine Standardization Annual Conference were held in Yiwu, Zhejiang. The meeting was guided by the Standardization Administration of the People's Republic of China, the China Machinery Industry Federation, and the Yiwu Municipal People's Government.

The repair and maintenance of industrial field equipment is inevitable, and the most embarrassing thing for field personnel is that the equipment is started while the person is still in the danger area. In this scenario, personnel are highly vulnerable to serious injuries from moving parts, harmful gases, harmful rays, and high temperatures. Listing...

In addition to the usual emergency stop monitoring, safety gate monitoring, light barrier monitoring and two-hand button monitoring, the safety relays of the PNOZsigma family are also functional, as well as safe speed monitoring, safe braking and braking monitoring. Voltage monitoring safety relays are also one of its features. PNO ...