Product Introduction: The optical communication system supports two-way communication between storage and retrieval systems, transmission vehicles, automatic guided vehicles and monorail conveyors. This is an alternative to complex and problematic cables, slip rings and other transmission solutions. The transmission between the two stations is replaced by infrared light, which is controlled by a data clock adjustment. Optical communication is suitable for a variety of buses. Data transfer replaces serial and 8-bit parallel modes.
Specifications:
Product Description | Optical data coupler for Fast Ethernet, 150 m detection range, IR lamp, 100 MBit/s data rate, M12 plug |
General specifications | Effective detection range | 0 ... 150 meters | Threshold detection range | 180 meters | light source | Laser diodes | Light | Modulated infrared light | Laser nominal rating | | | Lasers | 1M | | wavelength | 785nm | Spot diameter | 1.5 meters at a distance of 100 meters | Divergence angle | 1° | Functional safety-related parameters | MTTF d | 58.6 a | Task Time (TM) | 10 a | Diagnostic Coverage (DC) | 0％ | Indicators/means of operation | Data traffic metrics | LED Green: OPTO-Link
LED Yellow: LAN-Link
LED red: ERROR | Functional metrics | Signal Strength (8 LEDs: Red, Yellow, Green) | Electrical Specifications | Operating voltage | 18 ... 30 V DC | Data rate | 100 MBit/s (Fast Ethernet) | interface | Interface type | 100 BASE-TX | Compliance with standards and directives | Directive compliance | | | EMC Directive 2004/108/EC | EN 61000-6-2：2005; EN 60947-5-2：2007 | Standards Compliance | | | Lasers | IEC 60825-1：2007
EN 60825-1：2007 | Mechanical Specifications: | Ingress protection | IP65 | connect | 4-pin, M12x1 socket, standard (power),
8-pin, M12x1 connector, service,
4-pin, M12x1 socket, D-coded (LAN) | material | | | housing | ABS / PC | | Optical end faces | plastics |
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
P+F/Through-beam GD18 / GV18 /115/120
Product Introduction: Thru-beam sensor, M18 threaded housing design, plastic housing, front optical surface, 20 meters detection distance, red light, light and dark, DC version, 2 PNP outputs, fixed cable, high efficiency line, short M18 plastic housing application, very high detection range, 4 LED fingers...
|
|
P+F/Logic control devices up to 100 kHz
Introduction: Logic control units are widely used in the automation industry. In practice, they are capable of detecting digital or analog signals, displaying them and monitoring them. In order to solve the conversion and application between signals, we provide digital display meters, counters ...
|
|
P+F through-beam sensor OBE20M-R100-S2EP-IO-L
Description: P+F/Laser through-beam sensor OBE20M-R100-S2EP-IO-L Small design, multifunctional mounting options, multiple frequencies to prevent mutual interference (anti-crosstalk), high degree of protection IP69K.
...
|
|
P+F/Diffuse Reflex Mode Sensor GLV18-8-200 /115/120
Product Description: Triangulation sensor with background suppression, miniature design with multiple mounting options, best-in-class background suppressor, accurate object detection, virtually independent of color, extended temperature range.
Our customer-centric service philosophy ...
|
|
P+F/Reflective Plate Photoelectric Switch ML100-55/95/103 360 degree view
Product Description: Retroreflective sensor with polarization filter, plastic housing, 5 m detection range, red light, adjustable sensitivity, on/off when light/dark, DC type, PNP output, M8 plug, compact design, easy to use, extremely bright and clear light spot, all-metal threaded mounting, ...
|
|
P+F/DK10-LAS/35/49 Laser Class 2
Product Introduction: Print Mark Contrast Sensor, 800mm Detection Range, Red Laser, Laser Level 2, Light/Dark On, Sensitivity Adjuster, NPN Output, PNP Output, M12 Plug, Laser Print Mark Contrast Sensor, For Recording Very Small Print Marks, Laser, etc.
|
|
P+F/Capacitive sensor CBN5-F46-E2-10M 5mm
Introduction:P+F Capacitive Sensor CBN5-F46-E2-10M Flat Housing; reverse polarity protection; Fixing slot for cable tie, through-hole for screw mounting, cULus listed, general use.
Product parameters
...
|
|
P+F/Pixel Sensor GL30-RT / 32 / 40A / 98A Light/Dark
Product Introduction: Photocell Sensor, Zinc Die-Cast Housing, 30mm Slot Width, Red Light, Light/Dark, Sensitivity Regulator, DC Version, PNP Output, 3-Pin M8 Plug, Optimized for Detecting Small Parts, High Switching Frequency, Multi-Device Installation Possible, No Mutual Interference (No Crosstalk), Sensitivity ...
|
|
Germany P+F/Bejiafu capacitive sensor CBN2-F46-E1/E3 3-wire DC
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Inductive sensor NBN30-L2-E2-V1 30 mm
Introduction: Smooth or threaded stainless steel cylindrical housing for standard inductive sensors; reverse polarity protection and short circuit protection; LED status indicates M8, M12 connector connection or terminal wiring mode; PVC, PUR or silicon cable outlet; 2-wire, 3-wire, 4-wire DC, AC, NAMUR output ...
|
|
P+F/Through-beam photoelectric sensor LA39/LK39/31/40a/116
Introduction: P+F/Beijiafu through-beam photoelectric sensor LA39/LK39/31/40a/116 bright/dark on, switchable; Mounting accessories are available; The degree of protection is IP67. Inductive range adjuster, bright/dark switch.
Products...
|
|
P+F/UB120-12GM-E5-V1 connector M12
Product Introduction: The transducers used to transmit and receive sound waves are separated, so that the system does not need to wait for the signal attenuation of the transmitter, thus effectively reducing the dead zone. The direct detection type of ultrasonic sensors is available with switching and analog outputs. Direct detection of all support window mode functions ...
|
|
P+F/Inductive sensor NBB8-18GM50-E0-M 8mm
Summary: Inductive proximity sensors are the product of choice for most applications that require the precise and non-contact detection of metal objects in machinery or automation. As a pioneer and market leader in the field of sensors, we offer our customers innovative, high-quality inductors.
|
|
P+F/Capacitive sensor CJ4-12GK-N-5M with a rated voltage of 8V
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Optical fiber optic sensor SU19.1/110/115 30μs
Product Introduction: Classic Series Fiber Optic Sensor with Display, Slave Module, Push-Pull Output, Fixed Cable, Classic Line with Display, AGC (Automatic Gain Control) for Faster Teach-in, Combined Installation, Easy Wiring, Transparency Recognition, 30μs High Speed Mode.
...
|
|
P+F/Background Suppression Sensor MLV41-8-HV-60-IR / 110 /124/167
Product Introduction: Rugged Diffuse Mode Sensor for Monitoring Web Breakage, Compact Housing Design, Foreground and Background Suppression, 60mm Detection Range, IR Light, Push-Pull Output, Weak Signal Output, M12 Plug, Web Break Control and Special Equipment for Printing Machinery, Contamination ...
|
|
P+F Inductive Sensor NBB15-30GM50-WS Quasi-flush
Summary: Inductive proximity sensors are the preferred product for most applications that require the precise and non-contact detection of metal objects in mechanical or automated equipment. As a pioneer and market leader in the field of sensors, we offer our customers innovative, high-quality electrical products.
|
|
P+F/Bejiafu capacitive sensor CJ15+U1+A2 wire cross-sectional area of 2.5mm2
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Inertial Measurement Device IMU360D-F99-B20-V15
Product Description: The new generation of the F99 inclination measurement sensor is ideal for industrial environments due to its simplicity, durability and compact housing. The F99 inclination measurement sensor offers a standardized 4 ... 20 mA analogue interface with a measuring range of 0 ... 360° between, no need for expensive total ...
|
|
P+F Inductive Sensor NBN30-U1-E3 30mm non-flush
Introduction: Standard inductive sensor product features: smooth or threaded stainless steel cylindrical housing; reverse polarity protection and short circuit protection; LED status indicates M8, M12 connector connection or terminal wiring mode; PVC, PUR or silicon cable outlet; 2-wire, 3-wire, 4-wire DC, AC, ...
|
|
Contact
working hours
