Product introduction: The working principle of ultrasonic through-beam sensor is to detect an object by emitting sound waves from the transmitter to the receiver and being interrupted by the sound beam by the target object. The transmitter generates an ultrasonic signal that is received and evaluated by the receiver. When the ultrasonic beam is attenuated or interrupted by an object, the output of the receiver switches on and off.
Specifications:
Product Description | Single-head system |
General specifications | Sensing range | 15 ... 1000 mm | Standard target plates | 100 mm× 100 mm | Sensor frequency | About. 255 kHz | Indicators/means of operation | LED green | Open it | LED yellow | Switch status | LED red | Error, the object is not determined | Electrical Specifications | Operating voltage | 10 ... 30 V DC, ripple 10% SS | No-load current | ≤20 mA | input | Enter the type | 1. Program input
Free air path: -U B ... +1 V, Object: +6 V ... + U B
Input impedance: > 4,7 k Program pulse: ≥1 s | yield | Output type | PNP，NO | Rated operating current | 200 mA, short-circuit/overload protected | Voltage drops | ≤3 V | Turn on latency | <5 ms | Switching frequency | ≤100 Hz | Approvals and certificates | UL recognized | cULus listed, generic | CSA approved | cCSAus listed, generic | CCC approved | Products with a rated voltage of ≤ 36V do not require CCC certification/marking | Environmental conditions | Ambient temperature | -25 ... 70°C（-13 ... 158°F） | Storage temperature | -40 ... 85°C（-40 ... 185°F） | Mechanical Specifications: | Connection type | Connector M12 x 1,4 pins | Ingress protection | IP67 | material | | | housing | Brass, nickel-plated | | sensor | epoxy/hollow glass sphere mixture; Foamed polyurethane, covered with PBT | block | 25 grams |
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
Germany P+F/Beijiafu inductive sensor NBN4-F25-2Z4L weight 405g
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
P+F/Inductive sensor NBB20-L2-E2-V1 20mm
Introduction: Smooth or threaded stainless steel housing for inductive sensors; reverse polarity protection and short circuit protection; LED status indication; M8, M12 connector connection or terminal wiring; PVC, PUR or silicone cable outlet; 2-wire, 3-wire, 4-wire DC, AC, NAMUR and AS ...
|
|
P+F/MLV11-8-500-Ex/40b/112 60g
Description: The P+F/Photoelectric Sensor MLV11-8-500-Ex/40b/112 is ATEX certified for Zone 1 (gas); Intrinsically safe, explosion-proof operating specification IA IIC T6 Gb; Diffuse photoelectric sensors for standard applications; Sensitivity adjustable.
...
|
|
P+F/Capacitive sensor CBN15-F64-A2 15mm
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Bi-material sensor UDC-18GM50-255S-3E0
Product Introduction: Ultrasonic double sheet detector is used to automatically and at high speed to distinguish substrate materials, labels, sheet-fed and double-fed, so as to protect the machine from waste in the production process. The whole system consists of an ultrasonic transmitter, an ultrasonic receiver and an external or built-in ...
|
|
P+F Retroreflective sensor GLV18-55-S/25/102/159
Introduction:P+F Retroreflective Sensor GLV18-55-S/25/102/159 Retroreflective Photoelectric Sensor with Polarization Filter, M18 Threaded Housing Design, Plastic Housing, Side Optical End, 3.5 m Detection Range, Red Light, Bright On, DC Type, NPN Output, M12 Plug ...
|
|
P+F/Capacitive sensor CJ6-18GK-N-Y22734 rated voltage 8V
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F Capacitive sensor CCB10-30GS55-N1-V1
Introduction: Capacitive sensors can be used to detect targets in almost any material, including metal. These sensors are used in a wide range of applications for level and flow control, mainly liquids, particles and powders.
Give birth...
|
|
P+F/Optical Fiber Optic Sensor SU19/110/115/123 cable 160 mm
Product Introduction: Classic Series Fiber Optic Sensor, with Display, Main Module, Push-Pull Output, External Teach-in, Fixed Cable, Classic Line with Display, AGC (Automatic Gain Control) 30μs high-speed mode
Detailed parameters:
We take the guest ...
|
|
Germany P+F/Bejiafu capacitive sensor CBN2-F46-E1/E3 3-wire DC
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Reflective Plate Photoelectric Switch ML100-55/95/103 360 degree view
Product Description: Retroreflective sensor with polarization filter, plastic housing, 5 m detection range, red light, adjustable sensitivity, on/off when light/dark, DC type, PNP output, M8 plug, compact design, easy to use, extremely bright and clear light spot, all-metal threaded mounting, ...
|
|
P+F Capacitive Sensor CJ10-30GK-WS 10mm non-flush
Introduction: Capacitive sensors can be used to detect targets in almost any material, including metal. These sensors are used in a wide range of applications for level and flow control, mainly liquids, particles and powders.
...
|
|
P+F/Switching amplifier KCD2-SR-Ex1.LB 24 VDC
Introduction: Switching isolators supply power to proximity sensors in hazardous areas, receive proportional current, convert the input signal into a digital output signal, and transmit the switching signal to a control device such as a DCS or PLC. A switching isolator consists of three main components: power supply, transistor switch ...
|
|
P+F/UB400-F77-E0-V31 ultrasonic direct detection sensor
Introduction:P+F/P+F/Double Blessing Ultrasonic Direct Detection Sensor UB400-F77-E0-V31 Working Voltage 20 ... 30 V DC, ripple 10 %SS ; 12 ... 20 V DC sensitivity reduced to 90%; Output Type: 1-way switch output E0, NPN, normally open.
...
|
|
P+F/Accelerometer ACX04-F99-I-V15 outputs 4 mA~20 mA
Product Introduction: The F99 series accelerometer monitors the strong vibration or acceleration of the wind turbine due to high winds. The sensor has a rugged, environmentally friendly housing and uses a non-contact, reliable detection principle to avoid critical situations.
Specifications:
...
|
|
P+F/Inductive sensor NBN4-12GK50-E0/E2 voltage drop ≤3V
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
P+F/DK10-LAS/35/49 Laser Class 2
Product Introduction: Print Mark Contrast Sensor, 800mm Detection Range, Red Laser, Laser Level 2, Light/Dark On, Sensitivity Adjuster, NPN Output, PNP Output, M12 Plug, Laser Print Mark Contrast Sensor, For Recording Very Small Print Marks, Laser, etc.
|
|
P+F inductive sensor NBN4-F25K-E8 4 mm
Introduction: Smooth or threaded stainless steel cylindrical housing for standard inductive sensors; reverse polarity protection and short circuit protection; LED status indicates M8, M12 connector connection or terminal wiring mode; PVC, PUR or silicon cable outlet; 2-wire, 3-wire, 4-wire DC, AC, NAMUR output ...
|
|
P+F capacitive sensor CJ10-30GM-WO with a working distance of 10mm
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F capacitive sensor CBN15-18GS75-E2-V1 is non-flush
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
Contact
working hours
