Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change to realize the conversion of non-electricity to electricity.
Product parameters
| Switch function | Normally Open (NO) | | Output type | 2 lines | | Rated working distance | 4 mm | | Installation | Flush mounting | | Output polarity | DC | | Reliable operating distance | 0 ... 3,24 mm | | Actual travel distance | 3,6 ... 4,4 mm type | | Attenuation factor r Aluminum | 0,6 | | Attenuation factor r copper | 0,45 | | Attenuation factor r 304 | 1 | | Attenuation factor rSt37 | 1,2 | | Output type | 2x 2 wires | Rating: | | Operating voltage | 5 ... 30 V DC | | Switching frequency | 0 ... 500 Hz | | Hysteresis | Type 5 % | | Reverse polarity protection | Reverse polarity protection | | Short-circuit protection | pulse | | Voltage drop | ≤ 4,5 V | | Operating current | 4 ... 100 mA | | Leakage current | 120 ... 200 μA type 175 μA at 25°C | | Switching status indication | Yellow LED | Licensing & Certification: | | UL recognized | cULus recognized | | CCC certified | *Products with a maximum operating voltage of 36 volts do not need to be approved and therefore do not need to be equipped with the CCC-mark. | Surroundings: | | Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | | Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | Mechanical Properties: | | Connection type | Cable PVC, 2000 mm | | Conductor cross-sectional area | 0,75 mm2 | | Housing material | PBT | | Induction faces | PC | | Ingress protection | IP67 | | weight | 405 g | | Screw tightening torque | M5 x 25 ： 2,7 Nm |
This article introduces P+F/Double Fern inductive sensor NBN4-F25-2Z4L products, if you are interested in P+F/Double Fern inductive sensor, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
P+F/NJ1.5-PD-E02-1.250-V95 1,5mm
Introduction: NJ1.5-PD-E02-1.250-V95 inductive sensor proximity switch adopts 4-wire DC anti-welding interference design, the sensing range is 1.5mm, and the rated value is 3000psi.
Product Details
Switch function ...
|
|
P+F capacitive sensor CJ10-30GK-WS housing diameter 30 mm
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Optical Data Coupler DAD15-8P Spring Terminals
Product Introduction: The optical communication system supports two-way communication between storage and retrieval systems, transmission vehicles, automatic guided vehicles and monorail conveyors. This is an alternative to complex and problematic cables, slip rings and other transmission solutions. The transmission between the two sites is replaced by infrared light, which is made up of several ...
|
|
P+F/Inductive sensor NBN4-12GM50-E1 with a housing diameter of 12 mm
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
P+F/Triangulation sensor OQT150-R100-2EP-IO 10-30VDC
Product Description: Measurement core technology, 150 mm detection range, red light, IO-Link, 2 x push-pull output, 2 m fixed cable, miniature design with multiple mounting options, Multipixel Technology (MPT) - Flexibility and adaptability, switching diffuse reflection mode sensors, reducing equipment ...
|
|
P+F/Switching amplifier KCD2-SR-Ex1.LB 24 VDC
Introduction: Switching isolators supply power to proximity sensors in hazardous areas, receive proportional current, convert the input signal into a digital output signal, and transmit the switching signal to a control device such as a DCS or PLC. A switching isolator consists of three main components: power supply, transistor switch ...
|
|
P+F/Inductive sensor NCB1,5-8GM25-N0-Y295009
Introduction: Smooth or threaded stainless steel housing for inductive sensors; reverse polarity protection and short circuit protection; LED status indication; M8, M12 connector connection or terminal wiring; PVC, PUR or silicone cable outlet; 2-wire, 3-wire, 4-wire DC, AC, NAMUR...
|
|
P+F/Capacitive sensor CJ4-12GK-N-10M with a rated voltage of 8V
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Capacitive sensor CJ40-FP-A0-P1 has a voltage drop of ≤ 2.8 V
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Capacitive sensor CBN15-F64-A2-0, 3M-V1
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Through-beam photoelectric sensor BB10-P/59/76b/103/115e
Introduction: The transmitter and receiver on a thru-beam photoelectric sensor are aligned in opposite directions. The advantage of this is that the beam reaches the receiver directly, so a long detection distance and high excess gain can be achieved. These sensors are capable of reliably detecting almost any object. Angle of incidence, surface characteristics ...
|
|
P+F photoelectric sensor M100/MV100-RT/35/76a/95/103
Description: The through-beam sensors are designed in a miniature design with a slit in the light of the miniature sensor, which is easy to use, very bright, with a high visible light point, full metal threaded mounting, and the high-efficiency series is mounted in a short M18 plastic housing for standard applications.
...
|
|
P+F inductive sensor NBN5-F7-E0 5 mm non-flush
Introduction: P+F inductive sensor NBN5-F7-E0 5 mm non-flush, switch function normally open (NO), output type NPN, rated working distance 5 mm, installation non-flush, output polarity DC, ensure operating distance 0 ... 4,05 mm
...
|
|
P+F/Triangulation sensor OBT300-R100-2EP-IO-V31-L
Product Description: Triangulation sensor with background suppression, miniature design with multiple mounting options, best-in-class background suppressor, accurate object detection, virtually independent of color, extended temperature range
Our customer-centric service philosophy ...
|
|
P+F inductive sensor NBB1,5-8GM40-Z0 1.5 mm
Product Introduction: Inductive proximity sensors are the best product for most applications that require non-contact and accurate detection of metal objects in mechanical or automated equipment. As a pioneer in the field of sensors and a leading player in the market, we provide our customers with innovative, high-quality ...
|
|
P+F capacitive sensor CJ40-FP-A2-P1 is non-flush mounted
Introduction: P+F capacitive sensor CJ40-FP-A2-P1 40 mm, non-flush; 4-wire DC; The switching distance can be set in a wide range by using a potentiometer. One terminal connector** can be fitted with up to two conductors with the same cross-sectional area of the core.
...
|
|
P+F/Diffuse Mode Sensor GLV18-8-450 /73/120
Product Introduction: Diffuse Mode Sensor, M18 Threaded Housing Design, Plastic Housing, Front Optical Surface, 450 mm Detection Range, Red Light, Light & Dark, DC Type, 2 PNP Outputs, M12 Plug, High Efficiency Circuit in M18 Plastic Housing, For Standard Applications, Very High Detection Range, 4 ...
|
|
P+F/Double Blessing Timer KC-LCDC-48-2R-230VAC 142g
Introduction: P+F Timer KC-LCDC-48-2R-230VAC easy-to-read, backlit 2-line LCD display with icons for pre-selection and the status of both outputs; Add/subtract via 2 independent inputs, degree of protection IP65 (front).
...
|
|
P+F/Radiator LA31/LK31/31/115 LEDs
Product Description: Thru-beam sensor, 30 m detection range, red light, switch-on on bright, AC/DC type, relay output, fixed cable, cost-optimized series for standard tasks, small housing for large structures, high visibility LED, universal voltage version, relay output. ...
|
|
P+F/Reflective Plate Photoelectric Switch ML100-55/95/103 360 degree view
Product Description: Retroreflective sensor with polarization filter, plastic housing, 5 m detection range, red light, adjustable sensitivity, on/off when light/dark, DC type, PNP output, M8 plug, compact design, easy to use, extremely bright and clear light spot, all-metal threaded mounting, ...
|
|
Contact
working hours
