Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards the proximity switch, regardless of whether it is a conductor or not, due to its proximity, the dielectric constant of the capacitor must change, so that the capacitance changes, so that the state of the circuit connected to the measuring head also changes, so that the switch can be switched on or off. This proximity switch detects not only conductors, but also liquids and powders that can be insulated.
Product parameters
| Switch function | Normally Open (NO) | | Output type | NAMUR | | Rated working distance | 11 ... 12,5 mm | | Installation | Non-flush | | Reliable operating distance | 0 ... 8,8 mm | | Output type | 2 lines | Rating: | | Installation conditions | | | | A | 40 mm | | | B | 80 mm | | | C | 20 mm | | | F | 120 mm | | Rated voltage | 8 V | | Operating voltage | 7 ... 12 V | | Switching frequency | 0 ... 1 Hz | | Current consumption | | | | The measuring plate was not detected | max. 1 mA | | | The measuring plate was detected | ≥ 2,4 mA | Consistency with standards and norms: | | Meets standards | | | | NAMUR | EN 60947-5-6:2000
IEC 60947-5-6:1999 | Licensing & Certification: | | FM certification | | | | Control charts | 116-0165 | | UL recognized | cULus Listed, general requirements | | CSA Certified | cCSAus Listed, General Purpose | Surroundings: | | Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | Mechanical Properties: | | Connection type | Cable PVC, 2 m | | Conductor cross-sectional area | 0,75 mm2 | | Housing material | PBT | | Induction faces | PBT | | Ingress protection | IP68 | | cable | | | | Bend radius | > 10 x cable diameter | General Instructions: | | Use in hazardous areas | See Instruction Manual | | | grade | 1G; 2G; 1D
|
This article introduces the P+F/Double Capacitive Sensor CJ6-18GK-N-Y22734 product, if you are interested in P+F/Double Capacitive Sensor, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
P+F/Magnetic field sensor 20FR1-6B voltage 250VDC
Summary: The magnetic field sensor family includes the M12 housing type for traditional magnetic detection applications. We also offer a non-contact piston detection sensor for use with steel hydraulic cylinders. These magnetic sensors reliably detect piston magnets and are easy to install without the need for hydraulic ...
|
|
P+F/Capacitive sensor CBN10-F46-E2-10M core cross-section: 0.14mm2
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/UB400-F77-E0-V31 ultrasonic direct detection sensor
Introduction:P+F/P+F/Double Blessing Ultrasonic Direct Detection Sensor UB400-F77-E0-V31 Working Voltage 20 ... 30 V DC, ripple 10 %SS ; 12 ... 20 V DC sensitivity reduced to 90%; Output Type: 1-way switch output E0, NPN, normally open.
...
|
|
P+F/Fork sensor GL30-IR / 32 / 40A / 98A
Product introduction: There is a special through-beam sensor in our products called fork sensor. It is mainly used in places where the measurement distance is short. Since only one device requires wiring, fork sensors have the advantage of being easy to install compared to standard control sensors. ...
|
|
P+F/Capacitive sensor CBB8-18GK75-E2-V1 with a diameter of 18 mm
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F Barrier Module H Series Width 18mm
Introduction: The H-Series can be connected to hazardous area field devices and control systems by mounting multiple isolation barriers on terminal boards. Compared to a single interface module, the terminal block greatly simplifies wiring and saves costs. The terminal block is equipped with a sturdy plastic housing for quick and secure installation in the cabinet. ...
|
|
P+F/Inductive sensor NBN4-12GK50-E0/E2 voltage drop ≤3V
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
P+F/Bi-material sensor UDC-18GM50-255S-3E0
Product Introduction: Ultrasonic double sheet detector is used to automatically and at high speed to distinguish substrate materials, labels, sheet-fed and double-fed, so as to protect the machine from waste in the production process. The whole system consists of an ultrasonic transmitter, an ultrasonic receiver and an external or built-in ...
|
|
P+F/Diffuse Reflex Mode Sensor GLV18-8-200 /115/120
Product Description: Triangulation sensor with background suppression, miniature design with multiple mounting options, best-in-class background suppressor, accurate object detection, virtually independent of color, extended temperature range.
Our customer-centric service philosophy ...
|
|
P+F/Capacitive sensor CBN15-F64-A0 has a voltage drop of ≤2V
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Capacitive sensor CBN5-F46-E2-10M 5mm
Introduction:P+F Capacitive Sensor CBN5-F46-E2-10M Flat Housing; reverse polarity protection; Fixing slot for cable tie, through-hole for screw mounting, cULus listed, general use.
Product parameters
...
|
|
P+F/Through-beam GD18 / GV18 /115/120
Product Introduction: Thru-beam sensor, M18 threaded housing design, plastic housing, front optical surface, 20 meters detection distance, red light, light and dark, DC version, 2 PNP outputs, fixed cable, high efficiency line, short M18 plastic housing application, very high detection range, 4 LED fingers...
|
|
P+F Capacitive Sensor CJ10-30GK-WS 10mm non-flush
Introduction: Capacitive sensors can be used to detect targets in almost any material, including metal. These sensors are used in a wide range of applications for level and flow control, mainly liquids, particles and powders.
...
|
|
P+F/Encoder RVI58N-*******1 Incremental
Introduction: An incremental encoder provides a fixed number of pulses in one revolution, and the speed is calculated by the number of pulses measured per unit of time. To measure angles and positions, it is common to start counting from a starting reference point. The accuracy of incremental encoders depends on mechanical and electrical factors ...
|
|
P+F/Switching Amplifier KFD2-SOT3-Ex2 24V DC
Introduction: The K-series isolation barriers provide users with a comprehensive solution to ensure reliable & economical signal transmission between field devices and control rooms. Whether the user selects a single signal isolation module or performs large-scale system integration, the K Series ...
|
|
P+F/Reflective sensor ML100-55/103/115a 7 m
Description: Retroreflective sensor ML100-55/103/115a photoelectric sensor with polarization filter, plastic housing, 5 m detection range, red light, adjustable sensitivity, on/dark, DC, PNP output, fixed cable with M8 plug.
...
|
|
The P+F incremental encoder AH40 weighs approx. 160 g
Introduction: Incremental Encoder AH40, Industry Application: Textile Machinery, Bending Machinery, Printing Machinery, Metallurgical Industry, Elevator Product Structure: Empty Row Shaft, Outer Diameter (mm): 40mm, Bore Diameter/Shaft Diameter (mm): 8mm, Resolution (CPR): 1-1024 PPR, Working Voltage: 4,75... 30 V D ...
|
|
P+F/Inductive sensor NBB20-L2-E2-V1 20mm
Introduction: Smooth or threaded stainless steel housing for inductive sensors; reverse polarity protection and short circuit protection; LED status indication; M8, M12 connector connection or terminal wiring; PVC, PUR or silicone cable outlet; 2-wire, 3-wire, 4-wire DC, AC, NAMUR and AS ...
|
|
P+F/Optical fiber optic sensor SU19.1/110/115 30μs
Product Introduction: Classic Series Fiber Optic Sensor with Display, Slave Module, Push-Pull Output, Fixed Cable, Classic Line with Display, AGC (Automatic Gain Control) for Faster Teach-in, Combined Installation, Easy Wiring, Transparency Recognition, 30μs High Speed Mode.
...
|
|
P+F/Capacitive sensor CBN15-30GK60-A0 NPN15mm
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
Contact
working hours
