Product Introduction: Classic Series Fiber Optic Sensor with Display, Slave Module, Push-Pull Output, Fixed Cable, Classic Line with Display, AGC (Automatic Gain Control) for Faster Teach-in, Combined Installation, Easy Wiring, Transparency Recognition, 30μs High Speed Mode.
Detailed parameters:
Product Description | Robust and stable fiber optic sensor for glass fiber, infrared light, PNP output, M12 plug |
General characteristics | Sensor range | Black (6%): up to 55 mm
Kodak White with a reflectance coefficient of 90% up to 160 mm
With LLR 04-1.6-0.5-WC3 fiber optic cable | The type of light source | IRED | The type of light source | Modulated infrared light, 880 nm | Functional safety parameters | Mean time to failure (days) | 770 a | Service life (...) Month... days) | 20 a | Scope of diagnosis | 0 % | Indicator/Action key | Function display | LED yellow light, yellow light when the receiver is on; Flashes in non-stable areas | controller | Sensitivity adjustment, light/dark knob | Electrical characteristics | Operating voltage | 10 ... 30 V DC | output | Switch type | Switchable when on/dark
The switching mode specified in the section "Electrical Connection" applies to the L/D switch in the "L" position (switch on when on) | Signal output | 1 PNP output, short-circuit protection, reverse polarity protection, open collector | Conformity with the system of standards and norms | Directive compliant |
| | EMC Directive 2004/108/EC | EN Standard 60947-5-2:2007 | Meets standards |
| | Product standards | EN Standard 60947-5-2:2007
IEC 60947-5-2:2007 | Mechanical properties | Enclosure width | 31 mm | Enclosure height | 56,5 mm | Enclosure height | 13,6 mm | Ingress protection | IP67 | connect | 4-pin M12 x 1 connector | material |
| | enclosure | Aluminum, Delta-Seal coating |
| Optical end faces | Fiber optic connection |
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action and every detail of the service is professional and careful, can we meet or even exceed the expectations of customers, so that customers can be satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces P+F/Beijiafu fiber optic sensor SU19.1/110/115 products, if you are interested in P+F/Beijiafu fiber optic sensor, also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
P+F/UB100-F77-E0-V31 ultrasonic direct detection sensor
Introduction: The reflector and receiver of this type of ultrasonic sensor are in the same housing. A single ultrasonic transducer is cyclically switched between transmit and receive modes. The target object acts as a reflector of sound waves.
Specifications:
...
|
|
P+F/Capacitive sensor CBN15-18GS75-E2 normally open PNP
Introduction:P+F The CBN15-18GS75-E2 capacitive sensor is usually measured by one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When there is an object moving towards the proximity switch, ...
|
|
P+F/Capacitive sensor CBN15-F64-A2 15mm
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Reflective sensor ML100-55/103/115a 7 m
Description: Retroreflective sensor ML100-55/103/115a photoelectric sensor with polarization filter, plastic housing, 5 m detection range, red light, adjustable sensitivity, on/dark, DC, PNP output, fixed cable with M8 plug.
...
|
|
P+F/Encoder RVI50N-09B**A*T 80mA
Introduction: An incremental encoder provides a fixed number of pulses in one revolution, and the speed is calculated by the number of pulses measured per unit of time. To measure angles and positions, it is common to start counting from a starting reference point. The accuracy of incremental encoders depends on mechanical and electrical factors ...
|
|
P+F sensor NBN40-L2-E0-V1 40 mm non-flush
Introduction: NBN40-L2-E0-V1 is a kind of switch sensor (i.e., non-contact switch), which has the characteristics of travel switch and micro switch, and has sensing performance, and reliable action, stable performance, fast frequency response, long application life, strong anti-interference ability, etc.
|
|
P+F Inductive Sensor NBB20-U1-A2 4-wire DC
Introduction: Smooth or threaded stainless steel housing for inductive sensors; reverse polarity protection and short circuit protection; LED status indication; M8, M12 connector connection or terminal wiring; PVC, PUR or silicone cable outlet; 2-wire, 3-wire, 4-wire DC, AC, NAMUR and AS ...
|
|
P+F/Double Sheet Sensor UDC-18GM-400-3E1-Y194142
Product Introduction: Ultrasonic double sheet detector is used to automatically and at high speed to distinguish substrate materials, labels, sheet-fed and double-fed, so as to protect the machine from waste in the production process. The whole system consists of an ultrasonic transmitter, an ultrasonic receiver and an external or built-in ...
|
|
Germany P+F/Bejiafu capacitive sensor CBN2-F46-E1/E3 3-wire DC
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Capacitive sensor CJ4-12GK-N-10M with a rated voltage of 8V
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Capacitive sensor CJ10-30GM-WS current: 5~200mA
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Inductive sensor NBN4-12GM40-E2-T-V1 mass 12g
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
P+F Multiturn Absolute Encoder AVM58-H
Introduction: In this construction, the gear structure is added on the basis of the singleturn code disc, through these interconnected gears, we can measure up to 16,384 turns (14 bits), so that the total accuracy of the encoder is 16 bits (single turn) plus 14 bits (number of turns), or the total precision ...
|
|
P+F/UB400-F77-E0-V31 ultrasonic direct detection sensor
Introduction:P+F/P+F/Double Blessing Ultrasonic Direct Detection Sensor UB400-F77-E0-V31 Working Voltage 20 ... 30 V DC, ripple 10 %SS ; 12 ... 20 V DC sensitivity reduced to 90%; Output Type: 1-way switch output E0, NPN, normally open.
...
|
|
P+F/Accelerometer ACX04-F99-I-V15 outputs 4 mA~20 mA
Product Introduction: The F99 series accelerometer monitors the strong vibration or acceleration of the wind turbine due to high winds. The sensor has a rugged, environmentally friendly housing and uses a non-contact, reliable detection principle to avoid critical situations.
Specifications:
...
|
|
P+F/Inductive sensor NBB20-L2-E2-V1 20mm
Introduction: Smooth or threaded stainless steel housing for inductive sensors; reverse polarity protection and short circuit protection; LED status indication; M8, M12 connector connection or terminal wiring; PVC, PUR or silicone cable outlet; 2-wire, 3-wire, 4-wire DC, AC, NAMUR and AS ...
|
|
P+F/Inductive sensor NBB4-12GM50-E0 4 mm
Description: The NBB4-12GM50-E0 inductive sensor is rated for a working distance of 4 mm, flush mounting, an extended temperature range of -40 to +85 °C, an extended operating voltage range, and a wide range of mounting options for flexible use.
...
|
|
P+F/UB1000-18GM75-E5-V15
Product Introduction: The transducers used to transmit and receive sound waves are separated, so that the system does not need to wait for the signal attenuation of the transmitter, thus effectively reducing the dead zone. The direct detection type of ultrasonic sensors is available with switching and analog outputs. Direct detection of all support window mode functions ...
|
|
P+F/MLV11-8-500-Ex/40b/112 60g
Description: The P+F/Photoelectric Sensor MLV11-8-500-Ex/40b/112 is ATEX certified for Zone 1 (gas); Intrinsically safe, explosion-proof operating specification IA IIC T6 Gb; Diffuse photoelectric sensors for standard applications; Sensitivity adjustable.
...
|
|
P+F/Inclination sensor INX360D-F99-U2E2-V15 range 0~360°
Product Description: The new generation of the F99 inclination measurement sensor is ideal for industrial environments due to its simplicity, durability and compact housing. The F99 inclination measurement sensor offers a standardized 4 ... 20 mA analogue interface with a measuring range of 0 ... 360° between, no need for expensive total ...
|
|
Contact
working hours
