Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards the proximity switch, regardless of whether it is a conductor or not, due to its proximity, the dielectric constant of the capacitor must change, so that the capacitance changes, so that the state of the circuit connected to the measuring head also changes, so that the switch can be switched on or off. This proximity switch detects not only conductors, but also liquids and powders that can be insulated.
Product parameters
Switch function: normally open (NO)
Output Type: PNP
Rated working distance 1-8 mm
Installation: Rinse
Output Polarity: DC
rating
Working voltage: 10-30 volts
Switching frequency: 0 - 100 Hz
Reverse polarity protection
Short-circuit protection pulses
Voltage drop: ≤1.5V
Temperature drift of up to 20% from -5 to 55 degrees Celsius (23 to 131 degrees Fahrenheit)
The working current is 0-100 mA
No-load supply current: ≤18mA
Indicator/Operation Keys:
LED green operation display
The yellow LED indicates the switching status
Potentiometer sensitivity adjustment
Licensing & Certification:
Protection class II
UL listed cULus list, generic
CCC approval/marking is not required for products with a CCC approved rating of ≤ 36 V
Surroundings
Ambient temperature: -25 - 85 degrees Celsius (-13 - 185 degrees Fahrenheit)
Mechanical properties
Connector: M12 x 1,3-pin
Housing Material: PBT
Sensing surface: PBT
Housing diameter: 18 mm
Degree of protection: IP67
This article introduces the P+F/Double Capacitive Sensor CBB8-18GK75-E2-V1 product, if you are interested in P+F/Double Capacitive Sensor, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
P+F Capacitive Sensor CBN5-F46-E2-Y70121258
Introduction: P+F Capacitive sensor CBN5-F46-E2-Y70121258 rated working distance of 5 mm, non-flush mounting; DC 3 wire with additional wire for teaching; Flat housing; Fixing grooves for cable ties; Through-holes for screw mounting.
...
|
|
P+F/Inductive sensor NBB4-12GM50-E0 4 mm
Description: The NBB4-12GM50-E0 inductive sensor is rated for a working distance of 4 mm, flush mounting, an extended temperature range of -40 to +85 °C, an extended operating voltage range, and a wide range of mounting options for flexible use.
...
|
|
Germany P+F/Capacitive sensor CBB4-12GH60-E0-V1 with a voltage drop of ≤ 2,5 V
Description: Germany P+F/Capacitive sensor CBB4-12GH60-E0-V1 Voltage drop≤ 2,5 V, output type: PNP, reverse polarity protection: reverse polarity protection, no-load current: ≤ 12 mA
peculiarity
4 mm, flush
The working distance can be adjusted via a potentiometer
...
|
|
P+F/Inductive sensor NBN30-U10-E2 has a working distance of 30 mm
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
P+F/Capacitive sensor CJ6-18GK-N with a conductor cross-section of 0,75mm2
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F Singleturn Absolute Encoder AVS58-H Photoelectric Sampling
Introduction: For a singleturn encoder, one revolution of the encoder (360) can be divided into a maximum of 65,536 measurement steps (16 bits), and after one revolution, the code value will return to the starting position. The electrical components of the encoder do not remember the number of revolutions.
...
|
|
P+F/Capacitive sensor CBN5-F46-E2-10M 5mm
Introduction:P+F Capacitive Sensor CBN5-F46-E2-10M Flat Housing; reverse polarity protection; Fixing slot for cable tie, through-hole for screw mounting, cULus listed, general use.
Product parameters
...
|
|
P+F/NJ1.5-PD-E02-1.250-V95 1,5mm
Introduction: NJ1.5-PD-E02-1.250-V95 inductive sensor proximity switch adopts 4-wire DC anti-welding interference design, the sensing range is 1.5mm, and the rated value is 3000psi.
Product Details
Switch function ...
|
|
P+F photoelectric sensor M100/MV100-RT/35/76a/95/103
Description: The through-beam sensors are designed in a miniature design with a slit in the light of the miniature sensor, which is easy to use, very bright, with a high visible light point, full metal threaded mounting, and the high-efficiency series is mounted in a short M18 plastic housing for standard applications.
...
|
|
P+F/Capacitive sensor CJ10-30GM-WS current: 5~200mA
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Inertial Measurement Device IMU360D-F99-B20-V15
Product Description: The new generation of the F99 inclination measurement sensor is ideal for industrial environments due to its simplicity, durability and compact housing. The F99 inclination measurement sensor offers a standardized 4 ... 20 mA analogue interface with a measuring range of 0 ... 360° between, no need for expensive total ...
|
|
P+F/Triangulation sensor OQT150-R101-2EP-IO 150 mm
Product Introduction: Switching sensors with measurement core technology have an enhanced range of functions. Based on the Multipixel Technology (MPT) developed by Pepperl + Fuchs, multiple operating modes and switching points can be easily set in a single triangulation sensor. These photoelectric ...
|
|
P+F/Inductive sensor NBB3-V3-Z4 3 mm flush
Summary: Inductive proximity sensors are the preferred product for most applications that require the precise and non-contact detection of metal objects in mechanical or automated equipment. As a pioneer and market leader in the field of sensors, we offer our customers innovative, high-quality electrical products.
|
|
P+F/Capacitive sensor CBN15-F64-A2 15mm
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F capacitive sensor CBN15-18GS75-E2-V1 is non-flush
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/VLD700-F280-2E2-1000 laser diode
Product Introduction: Parameterization of the SmartRunner Detector is very simple. The laser line of the vision sensor is projected onto the desired background and programmed using teach-in. With the Data Matrix control code, the user can set additional parameters such as the detection area without a PC ...
|
|
Germany P+F/Beijiafu inductive sensor NBN4-F25-2Z4L weight 405g
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
P+F Retroreflective Sensor ML100-55/95/102 5m detection range
Description: Retroreflective sensor ML100-55/95/102 photoelectric sensor with polarization filter, plastic housing, 5 m detection range, red light, adjustable sensitivity, light/dark, DC type, NPN output, M8 plug.
...
|
|
P+F/Double Sheet Sensor UDC-18GM-400-3E1-Y194142
Product Introduction: Ultrasonic double sheet detector is used to automatically and at high speed to distinguish substrate materials, labels, sheet-fed and double-fed, so as to protect the machine from waste in the production process. The whole system consists of an ultrasonic transmitter, an ultrasonic receiver and an external or built-in ...
|
|
P+F/Pixel Sensor GL30-RT / 32 / 40A / 98A Light/Dark
Product Introduction: Photocell Sensor, Zinc Die-Cast Housing, 30mm Slot Width, Red Light, Light/Dark, Sensitivity Regulator, DC Version, PNP Output, 3-Pin M8 Plug, Optimized for Detecting Small Parts, High Switching Frequency, Multi-Device Installation Possible, No Mutual Interference (No Crosstalk), Sensitivity ...
|
|
Contact
working hours
