Product Description: Retroreflective sensor with polarization filter, M18 threaded housing design, plastic housing, front optical face, 4 m detection range, red light, light and dark on, DC type, 2 PNP output, fixed cable, high-efficiency wire in M18 plastic housing Standard application, very high detection range, 4 LEDs, 360° visibility, optimized potentiometer design, clear control button layout in the app, version with front optical surface.
Product Description | Retroreflective sensor with polarization filter, M18 threaded housing design, plastic housing, front optical face, 4 m detection range, red light, on/dark, DC version, 2 PNP output, fixed cable |
General specifications | Effective detection range | 0 ... 4 meters | Threshold detection range | 5.5 meters | light source | LED | Light | Modulated visible red light, 640 nm | Polarization filters | be | Spot diameter | About. 200 mm at 5.5 m | Divergence angle | About. 2° | Functional safety-related parameters | MTTF d | 920 a | Task Time (TM) | 20 a | Diagnostic Coverage (DC) | 0％ | Indicators/means of operation | Functional metrics | LED yellow: lights up when the beam is received; Flashes when stability control is lost; Turns off when the beam is interrupted | Electrical Specifications | Operating voltage | 10 ... 30 V DC | yield | Toggle the type | Light/Dark | Signal output | 2 PNPs, complementary, short-circuit protected, open-circuit collector | Compliance with standards and directives | Standards Compliance | | | Product standards | EN 60947-5-2：2007
IEC 60947-5-2：2007 | Mechanical Specifications: | Ingress protection | IP67 | connect | 2 m fixed cable | material | | | housing | PC | | Optical end faces | PMMA | | cable | PVC |
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action and every detail of the service is professional and careful, can we meet or even exceed the expectations of customers, so that customers can be satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces the P+F/Bulb Photoelectric Sensor M100/MV100-6090/102/115 products, if you are interested in P+F/P+F/P+F/M100/M100/M100/M100/M100/M100/M100/M100/M100/M100/M100/M100/M100/M100/M102/M105/M10/M10/M10/M10/M10/M10/M10/M1/M1/M10/M1/M1/M1/M1/M/
|
More on that
|
P+F/Capacitive sensor CBN10-F46-E2-10M core cross-section: 0.14mm2
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/M100/MV100-6090/102/115 through-beam photoelectric sensors
Product Introduction: Thru-beam sensor, miniature design, miniature sensor light forming slit, easy to use, very bright, high visible light point, full metal threaded mounting.
Our customer-centric service concept: the pursuit of a full range of services is a ...
|
|
P+F Capacitive Sensor CJ40-FP-A2-P4 4-wire
Introduction:P+F capacitive sensor CJ40-FP-A2-P4 series rectangular, housing material is POM / metal, output type 4 wires, non-flush mounting, DC voltage type, screw terminal connection type, protection class IP65.
...
|
|
P+F/Capacitive sensor CJ4-12GK-N-Y235563 non-flush 2-wire
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Encoder RVI50N-09B**A*T 80mA
Introduction: An incremental encoder provides a fixed number of pulses in one revolution, and the speed is calculated by the number of pulses measured per unit of time. To measure angles and positions, it is common to start counting from a starting reference point. The accuracy of incremental encoders depends on mechanical and electrical factors ...
|
|
P+F Inductive Sensor NBB15-30GM50-WS Quasi-flush
Summary: Inductive proximity sensors are the preferred product for most applications that require the precise and non-contact detection of metal objects in mechanical or automated equipment. As a pioneer and market leader in the field of sensors, we offer our customers innovative, high-quality electrical products.
|
|
P+F/Accelerometer ACX04-F99-I-V15 outputs 4 mA~20 mA
Product Introduction: The F99 series accelerometer monitors the strong vibration or acceleration of the wind turbine due to high winds. The sensor has a rugged, environmentally friendly housing and uses a non-contact, reliable detection principle to avoid critical situations.
Specifications:
...
|
|
P+F/Inclination sensor INX360D-F99-U2E2-V15 range 0~360°
Product Description: The new generation of the F99 inclination measurement sensor is ideal for industrial environments due to its simplicity, durability and compact housing. The F99 inclination measurement sensor offers a standardized 4 ... 20 mA analogue interface with a measuring range of 0 ... 360° between, no need for expensive total ...
|
|
P+F/Capacitive sensor CBN15-30GK60-A0 NPN15mm
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Capacitive sensor CJ4-12GK-N-10M with a rated voltage of 8V
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Switching amplifier KCD2-SR-Ex1.LB 24 VDC
Introduction: Switching isolators supply power to proximity sensors in hazardous areas, receive proportional current, convert the input signal into a digital output signal, and transmit the switching signal to a control device such as a DCS or PLC. A switching isolator consists of three main components: power supply, transistor switch ...
|
|
P+F through-beam photoelectric sensor GD18-S/GV18-S/73/120
Description: Thru-beam sensor, miniature design, light forming slit of miniature sensor, easy to use, very bright, high visible light point, all-metal threaded mounting, high-efficiency series mounted in a short M18 plastic housing, suitable for standard applications.
...
|
|
P+F/Multi-line LED Scanner R2100 4-20mA analog output
Product Introduction: The R2100 Multi-Ray LED Scanner, also known as a 2D LiDAR sensor, combines pulsed ranging technology with ultra-infrared LEDs and multi-beam scanning to further advance the realm of possibilities. Multiple LED emitter elements arranged next to each other provide a two-dimensional surface with eleven points of light ...
|
|
P+F/Optical Data Coupler DAD15-8P Spring Terminals
Product Introduction: The optical communication system supports two-way communication between storage and retrieval systems, transmission vehicles, automatic guided vehicles and monorail conveyors. This is an alternative to complex and problematic cables, slip rings and other transmission solutions. The transmission between the two sites is replaced by infrared light, which is made up of several ...
|
|
P+F/Inductive sensor NBN4-12GM50-E1 with a housing diameter of 12 mm
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
P+F/Beam Ultrasonic Barrier UBE4000-30GM-SA2-V15 nickel-plated brass
Introduction: There is no electrical connection between the transmitter and receiver, and while the sensor is mounted in such a way that it does not affect the functionality of the ultrasonic through-beam sensor, it is recommended to mount the transmitter face up when the sensor is mounted vertically to prevent the accumulation of dust particles.
...
|
|
P+F/MLV11-8-500-Ex/40b/112 60g
Description: The P+F/Photoelectric Sensor MLV11-8-500-Ex/40b/112 is ATEX certified for Zone 1 (gas); Intrinsically safe, explosion-proof operating specification IA IIC T6 Gb; Diffuse photoelectric sensors for standard applications; Sensitivity adjustable.
...
|
|
P+F/GZ Sensor GL10-RT / 30 / 40A / 98A
Product introduction: There is a special through-beam sensor in our products called fork sensor. It is mainly used in places where the measurement distance is short. Since only one device requires wiring, fork sensors have the advantage of being easy to install compared to standard control sensors. ...
|
|
P+F/Background Suppression Sensor RL31-8-H-800-RT/73C/136
Product Description: Triangulation Sensor, Standard Application Background Suppression, Large Housing Design, 800 mm Adjustable Detection Range, Red Light, Low Light, Push-Pull Output, M12 Plug, Cost-Optimized Series for Standard Tasks, Small Housing Large Construction, High Visibility Indicator, Low Target Color ...
|
|
P+F/Capacitive sensor CBN15-F64-A0 has a voltage drop of ≤2V
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
Contact
working hours
