Product Introduction: Thru-beam sensor, miniature design, miniature sensor light forming slit, easy to use, very bright, high visible light point, full metal threaded mounting.
Product Description | | Thru-beam photoelectric sensors |
System components | | Transmitters | M100-6090/76b/115 | | receiver | MV100-6090/102/115 | General specifications | | Effective detection distance | 0 ... 2,8 m | | Detection range limit values | 4 m | | light source | LED | | The type of light source | Modulates visible red light | | Spot diameter | Approximately 0,3 m apart from each other | | Divergence angle | Approximately 2 ° | | Optical end faces | Shoot straight ahead | | Ambient light limitations | EN 60947-5-2 | Functional safety-related parameters | | MTTFd | 860 a | | Mission Time (TM) | 20 a | | Diagnostic Coverage (DC) | 0 % | Indicator/method of operation | | Work indicator | Green LED: Powered on | | Function indicator | Receiver: Yellow LED, lights up when the beam is unobstructed, flashes when stability control is insufficient; Turn off when the beam is interrupted | | Control elements | Sensitivity adjustment | | Control elements | Turn on when it's on/turn on when it's dark | Electrical Specifications | | Operating voltage | 10 ... 30 V DC | | Ripple | Up to 10 % | | No-load current | Emitter: ≤ 15 mA
Receiver: ≤ 8 mA | input | | Test inputs | Deactivate the transmitter at 0 V | output | | Switch type | The switch type of this sensor is changeable. The default setting is: Switch on when on | | Signal output | 1 NPN output, short-circuit protection, reverse polarity protection, open collector | | Switching voltage | 30 V DC max | | Switching current | max. 100 mA, impedance load | | Voltage drop | ≤ 1,5 V DC | | Switching frequency | 1000 Hz | | Response time | 0,5 ms | compliance | | Product standards | EN 60947-5-2 | Certifications and certificates | | UL recognized | cULus certified Class 2 power supply, or certified power supply with limited voltage output with (can be integrated) fuse (3.3 A max, UL248 compliant), Class 1 enclosure | | CCC certified | At a rated voltage of ≤ 36 V, the product does not require CCC certification/marking | Environmental conditions | | Ambient temperature | -30 ... 60 °C (-22 ... 140 °F) | | Storage temperature | -40 ... 70 °C (-40 ... 158 °F) | Mechanical Specifications: | | Enclosure width | 11 mm | | Enclosure height | 31 mm | | Enclosure depth | 20 mm | | Ingress protection | IP67 | | connect | 2 m fixed cable | | material | | | enclosure | PC (Polycarbonate) | | Optical end faces | PUMA | | quality | approx. 100 g (transmitter and receiver) | | The tightening torque of the tightening screw | 0,6 Nm | | Cable length | 2 m |
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action and every detail of the service is professional and careful, can we meet or even exceed the expectations of customers, so that customers can be satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces the P+F/Bulb Photoelectric Sensor M100/MV100-6090/102/115 products, if you are interested in P+F/P+F/P+F/M100/M100/M100/M100/M100/M100/M100/M100/M100/M100/M100/M100/M100/M100/M102/M105/M10/M10/M10/M10/M10/M10/M10/M1/M1/M10/M1/M1/M1/M1/M/
|
More on that
|
P+F through-beam photoelectric sensor GD18-S/GV18-S/73/120
Description: Thru-beam sensor, miniature design, light forming slit of miniature sensor, easy to use, very bright, high visible light point, all-metal threaded mounting, high-efficiency series mounted in a short M18 plastic housing, suitable for standard applications.
...
|
|
P+F/The capacitive sensor CJ10-30GK-WO has a working distance of 10 mm
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Inductive sensor NBB4-12GM50-E0 4 mm
Description: The NBB4-12GM50-E0 inductive sensor is rated for a working distance of 4 mm, flush mounting, an extended temperature range of -40 to +85 °C, an extended operating voltage range, and a wide range of mounting options for flexible use.
...
|
|
P+F/Inductive sensor NBN30-U10-E2 has a working distance of 30 mm
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
P+F/Ultrasonic sensor UC6000-30GM-2EP-IO-V15
Introduction: The reflector and receiver of this type of ultrasonic sensor are in the same housing. A single ultrasonic transducer is cyclically switched between transmit and receive modes. The target object acts as a reflector of sound waves.
Specifications ...
|
|
P+F Zener Barrier Z System 35 mm DIN rail
Introduction: P+F/Plus Forziner Barrier - cost-saving, easy to install explosion protection. Mounted directly on a 35 mm DIN rail. With the accessory, the required grounding can be carried out directly on the DIN mounting rail.
Product Details
Zen ...
|
|
P+F Inductive Positioning System PMI120-F90-IU-IO-V15
Introduction:P+F Inductive Positioning System PMI120-F90-IU-IO-V15 Reverse Polarity Protection, Analog Current or Voltage Output, Programmable; Linearity ranges from 1 to 119 mm; PBT, stainless steel 1.4571, brass, nickel-plated housing.
...
|
|
P+F/Radiator LA31/LK31/31/115 LEDs
Product Description: Thru-beam sensor, 30 m detection range, red light, switch-on on bright, AC/DC type, relay output, fixed cable, cost-optimized series for standard tasks, small housing for large structures, high visibility LED, universal voltage version, relay output. ...
|
|
P+F/Beam Ultrasonic Barrier UBE1000-18GM40A-SE2-V1
Introduction: There is no electrical connection between the transmitter and receiver, and while the sensor is mounted in such a way that it does not affect the functionality of the ultrasonic through-beam sensor, it is recommended to mount the transmitter face up when the sensor is mounted vertically to prevent the accumulation of dust particles.
...
|
|
P+F/NJ1.5-PD-E02-1.250-V95 1,5mm
Introduction: NJ1.5-PD-E02-1.250-V95 inductive sensor proximity switch adopts 4-wire DC anti-welding interference design, the sensing range is 1.5mm, and the rated value is 3000psi.
Product Details
Switch function ...
|
|
P+F Singleturn Absolute Encoder AVS58-H Photoelectric Sampling
Introduction: For a singleturn encoder, one revolution of the encoder (360) can be divided into a maximum of 65,536 measurement steps (16 bits), and after one revolution, the code value will return to the starting position. The electrical components of the encoder do not remember the number of revolutions.
...
|
|
P+F/Through-beam photoelectric sensor OBE500-R2F-SE2 500 μs
Description: OBE500-R2F-SE2 through-beam photoelectric sensor, low profile design, space-saving M2 mounting, 500 mm detection range, red light, dark on, PNP output, fixed cable.
Product parameters
Effective detection ...
|
|
P+F/Optical Fiber Optic Sensors SU18/16/35/40a/110/115/126a
Product Introduction: Fiber Optic Sensors for Glass and Plastic Fibers, Basic Production Line for DIN Rail Mounting, High Power Version, Sleek Design, Selectable 3 Response Times, Mutual Interference Prevention (No Crosstalk)
Detailed parameters:
...
|
|
P+F/VLD700-F280-2E2-1000 laser diode
Product Introduction: Parameterization of the SmartRunner Detector is very simple. The laser line of the vision sensor is projected onto the desired background and programmed using teach-in. With the Data Matrix control code, the user can set additional parameters such as the detection area without a PC ...
|
|
P+F/Capacitive sensor CBN7-F46-E1-Y291652 3-wire DC
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F capacitive sensor CJ10-30GK-WS housing diameter 30 mm
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Sensor NBN4-12GM60-A2-V1 4 mm non-flush
Introduction: NBN4-12GM60-A2-V1 standard inductive sensor smooth or threaded stainless steel cylindrical housing; reverse polarity protection and short circuit protection; LED status indicates M8, M12 connector connection or terminal wiring mode; PVC, PUR or silicon cable outlet; 2-wire, 3-wire, 4-wire DC, ...
|
|
P+F/Capacitive sensor CBN10-F46C-EI 7mm
Introduction: Capacitive sensors can be used to detect targets in almost any material, including metal. These sensors are used in a wide range of applications for level and flow control, mainly liquids, particles and powders.
Give birth...
|
|
P+F through-beam sensor OBE20M-R100-S2EP-IO-L
Description: P+F/Laser through-beam sensor OBE20M-R100-S2EP-IO-L Small design, multifunctional mounting options, multiple frequencies to prevent mutual interference (anti-crosstalk), high degree of protection IP69K.
...
|
|
P+F/2D Laser Scanner R2000 5-pin M12x1 connector
Product Introduction: The R2000 series combines standard sensors with the latest measurement methods. The R2000 2D laser scanner (also known as 2D LiDAR sensor) is equipped with the innovative Pulse Ranging Technology (PRT) to deliver reliable and extremely precise measurement results with 360° gap-free ...
|
|
Contact
working hours
