1. Determine the type according to the measurement object and environment It is necessary to carefully analyze the measurement work and consider which principle of sensor to use for measurement, because even the same physical quantity can be measured by different principles. Secondly, we have to consider the range, volume (whether the space is sufficient), amperemia ...

· punch · vibrating feeder · Transporter · Pill counting · Small object detection · oven · Semiconductor processing equipment · Robotic arms and mobile machinery ...

1. Shielding technology Containers are made of metal materials. Wrapping the circuit that needs to be protected in it can effectively prevent the interference of electric or magnetic fields, and this method is called shielding. Shielding can be divided into electrostatic shielding, electromagnetic shielding and low-frequency magnetic shielding. 2. Electrostatic shielding ...

(1) When the grating ruler displacement sensor is connected to the digital display table, the power must be cut off, and the power supply will be provided after the plug is linked. (2) The grating ruler displacement sensor should prevent foreign objects from entering its interior, including water, oil, dust, etc., so a protective cover should be installed as much as possible outside. (3) Periodic inspection ...

1. The magnetic tape can be directly pasted on the surface of the equipment, and the two ends are fixed with screws; 2. The magnetic tape can be directly installed in the reserved groove; 3. The magnetic tape can be pasted in the aluminum alloy protective shell provided by the manufacturer, and then the magnetic ruler can be fastened to the equipment with the mounting bracket. ...

(1) When the grating ruler displacement sensor is connected to the digital display table, the power must be cut off, and the power supply will be provided after the plug is linked. (2) The grating ruler displacement sensor should prevent foreign objects from entering its interior, including water, oil, dust, etc., so a protective cover should be installed as much as possible outside. (3) Periodic inspection ...

Analog vs Digital Output: This is the first thing to consider. This depends on the interface between your system and the accelerometer. Generally, the analog output voltage is proportional to the acceleration, for example, 2.5V corresponds to 0g acceleration, and 2.6V corresponds to 0.5g acceleration. ...

1. If the electronic ruler has been used for a long time, and the seal has been aged, and there are many impurities mixed with it, and the water mixture and oil will seriously affect the contact resistance of the brush, which will make the displayed numbers keep jumping. At this time, it can be said that the electronic ...

1. Add a protective cover as much as possible, and clean up the chips and oil splashed on the ruler in time to strictly prevent any foreign matter from entering the inside of the grating ruler sensor housing. 2. When plugging and unplugging the grating displacement sensor and the plug holder of the digital display, the power should be turned off. 3. For the extension of the dust seal ...

1. Microwave and RF environments 2. Nuclear energy and hazardous environments 3. High temperature and high pressure environment 4. Online monitoring 5. Aerospace applications 6. Civil engineering and geotechnical applications 7. Materials Science ...

The displacement sensor has the advantages of digitization, high accuracy, strong anti-interference ability, no human reading error, easy installation, and reliable use. Displacement sensors can be divided into inductive displacement sensors, capacitive displacement sensors, photoelectric displacement sensors, displacement sensors, ultrasonic displacement ...

1. Use the 4 fixing screw holes at the bottom to install directly or add protection or other mechanical use according to the needs of the site and machine installation space facilities. 2. When installing the stainless steel cable, it is necessary to pay attention to the horizontal angle, that is, to make the mechanism of the steel cable from the outlet to the moving part as much as possible, and slide horizontally during work.

1. Resistive sensors The basic principle of a resistive sensor is to convert the measured change into a change in the resistance value of the sensing element, and then turn it into an electrical signal output through the conversion circuit. Applications: 1. Strain resistance sensor, used to measure tensile and compressive stress, and other physical quantities based on this...

1. Use the 4 fixing screw holes at the bottom to install directly or add protection or other mechanical use according to the needs of the site and machine installation space facilities. 2. When installing the stainless steel cable, it is necessary to pay attention to the horizontal angle, that is, to make the mechanism of the steel cable from the outlet to the moving part as much as possible, and slide horizontally during work.

1. The working principle and common parameters of the rope displacement sensor The function of a rope-actuated displacement sensor is to convert mechanical motion into an electrical signal that can be measured, recorded or transmitted. The rope displacement sensor consists of a stretchable stainless steel rope wound around a threaded hub with a ...

First, it is the problem of wiring or configuration to be considered. For the through-beam BANNER photoelectric sensor, it must be used in combination with the light emitting part and the light receiving part, and both ends need to be powered by power; The regression reflector type must be used in combination with the sensor probe and the regression reflector; At the same time, the user has to give the sensor ...

1. High precision: Banner metal laser sensors provide up to 0.1 micron accuracy, which can meet the needs of high-precision measurement and control. 2. Long-distance measurement: The laser beam of Banner laser sensor can cover a distance of several hundred meters, which can achieve long-distance measurement. 3. High speed ...

The static characteristics of a sensor refer to the performance of the sensor in a static state, which is an important indicator to measure the sensor. The static characteristics of a sensor include linearity, repeatability, hysteresis, accuracy, sensitivity, threshold and resolution, drift, and more. 1. Linearity refers to the sensor measurement ...

1. Simple structure: no active electrical contacts, long life. 2. High sensitivity: the output signal is strong, and the voltage sensitivity can reach hundreds of millivolts per millimeter. 3. Large resolution: you can feel the slight mechanical displacement and the slight angle change. 4. Repeatability and linearity ...

1. Photoelectric head dust masking When the photoelectric sensor is operating, it is easy to accumulate dust or oil dirt on the receiving head, resulting in problems such as insensitive sensor response, false triggering or non-triggering, and even failure to operate normally. At this time, we need to clean the photoelectric head. Cleaning method: ...

1. Optical adjustment The factory setting of the sensor is a large range, and this setting is subject to change. Note: Only use your finger to press the button. 2. Set the range (when stationary) 1. Adjust the sensor with a reflector; 2. Press the button for about 3s until two ...