Banner Sensors – Six Elements of Fiber Optic Sensor Selection

Create Date: 2024-8-30 12:03:23|Source: BANNER

1. Determine the type according to the measurement object and environment

It is necessary to carefully analyze the measurement work and consider which principle of sensor to use for measurement, because even the same physical quantity can be measured by different principles. Secondly, it is necessary to consider the measuring range, size (whether there is enough space), installation method, signal type (analog or digital signal), measurement method (direct or indirect measurement), and so on.

2. Accuracy of optical fiber sensor

The accuracy level of the sensor is a very important parameter related to the accuracy of the entire system. Generally, the higher the accuracy, the more expensive the price. Therefore, when we choose, we have to consider the whole, what suits us is the best, do not blindly pursue the so-called high precision, unless we need to quantitatively measure the accurate value, we choose a sensor with a higher accuracy level.

3. Selection of sensitivity

Sensitivity is the ratio of the increment of the output to the corresponding increment of the input. We have to correctly understand this parameter, which is divided into two aspects: 1. In the linear range, the sensitivity is high, and the output signal value is relatively large, which is the advantage. 2. The sensitivity is high, and the external noise that is not related to the measurement is also easy to mix, which affects the accuracy in the processing process.

4. Linear range

The linear range is the range in which the output is proportional to the input, so we all want the wider the linear range, the better, the wider the linear range, the larger the range, and the higher the accuracy. But the linear range of any sensor is relative. We only need to estimate the measurement volume so that it is within the linear range.

5. Frequency response characteristics

During the measurement process, there is always a certain delay in the output of the sensor, which is also different from the actual value. So we want the frequency response to be a little bit faster, so that the latency is a little bit shorter. However, due to the influence of structural and other characteristics, it is difficult to increase the frequency.

6. Stability

Stability refers to the ability to maintain its performance over a long period of time. In addition to its own reasons, the factors that affect stability are mainly environmental factors. Therefore, the selected sensors should have strong environmental adaptability, and protective measures must be taken when appropriate.

Banner Sensors – Six Elements of Fiber Optic Sensor Selection

More on that

	Common faults of photoelectric sensors and how to deal with them 1. Photoelectric head dust masking When the photoelectric sensor is operating, it is easy to accumulate dust or oil dirt on the receiving head, resulting in problems such as insensitive sensor response, false triggering or non-triggering, and even failure to operate normally. At this time, we need to clean the photoelectric head. Cleaning method: ...
	Banner Sensors - Introduction to the features and advantages of fiber optic sensors High sensitivity Lightweight and flexible, easy to install and buried Electrical insulation and chemical stability. Optical fiber itself is a highly insulating and chemically stable substance, which is suitable for harsh environments such as high-voltage isolation and flammable and explosive in power systems and chemical systems Good security ...
	What are the advantages of Banner sensors over other sensors 1. High precision: Banner metal laser sensors provide up to 0.1 micron accuracy, which can meet the needs of high-precision measurement and control. 2. Long-distance measurement: The laser beam of Banner laser sensor can cover a distance of several hundred meters, which can achieve long-distance measurement. 3. High speed ...
	Banner Sensor - How to install a magnetic scale displacement sensor magnetic tape 1. The magnetic tape can be directly pasted on the surface of the equipment, and the two ends are fixed with screws; 2. The magnetic tape can be directly installed in the reserved groove; 3. The magnetic tape can be pasted in the aluminum alloy protective shell provided by the manufacturer, and then the magnetic ruler can be fastened to the equipment with the mounting bracket. ...
	Banner Sensors – the measuring principle of fiber optic sensors (1) The principle of physical optical fiber sensor, which uses the sensitivity of optical fiber to environmental changes to convert the input physical quantity into a modulated optical signal. Its working principle is based on the optical modulation effect of optical fibers, that is, the optical fiber's response to external environmental factors, such as temperature, pressure, electric field, ...
	Banner Sensors – The difference between fiber optic sensors and photoelectric sensors The first point is that photoelectric sensors and fiber optic sensors work differently First of all, from the working principle of the two, first of all, the photoelectric sensor works according to the principle of the photoelectric effect, that is, when the light hits the photoelectric sensor made of semiconductors, it will emit light ...
	Banner Sensors – How to Judge Good or Bad Fiber Optic Sensors? How to judge the quality of fiber optic sensors: 1. Packaging, first of all, it depends on whether the packaging of the fiber grating sensor is suitable for your application; 2. Range, whether the range of the FBG sensor is consistent with your measurement index; 3. Accuracy, the accuracy of the sensor itself as ...
	Banner Sensors – Fiber optic sensors are based on the Internet of Things (IoT) applications 1. Application in infrastructure engineering Internet of Things In the process of construction and use of major projects such as highways, bridges, tunnels and buildings, there are often local collapses, leaks and fires in tunnels, local cracks and collapses in bridges, which not only seriously threaten people's lives and property.
	Banner Sensors - An introduction to the classification of displacement sensors The displacement sensor has the advantages of digitization, high accuracy, strong anti-interference ability, no human reading error, easy installation, and reliable use. Displacement sensors can be divided into inductive displacement sensors, capacitive displacement sensors, photoelectric displacement sensors, displacement sensors, ultrasonic displacement ...
	Banner Sensors – Precautions for the use of grating displacement sensors 1. Add a protective cover as much as possible, and clean up the chips and oil splashed on the ruler in time to strictly prevent any foreign matter from entering the inside of the grating ruler sensor housing. 2. When plugging and unplugging the grating displacement sensor and the plug holder of the digital display, the power should be turned off. 3. For the extension of the dust seal ...
	Common failures of Banner sensors 1. The problem of the sealing ring of the pressure sensor The output of the pressurized transmitter does not change, and the output of the pressurized transmitter changes suddenly, and the zero position of the pressure relief transmitter cannot be returned, which is likely to be a problem with the sealing ring of the pressure sensor. It is common that due to the specification of the sealing ring, the sensor is tightened and tightened.
	What should I pay attention to when wiring Banner safety light curtains? 1. The brown line VCC of the transmitter is connected to the brown line VCC of the receiver, and then the power supply is +24DC. 2. The transmitter black wire GND is connected to the receiver black wire GND, and then connected to the power supply negative OV. 3. The transmitter gray line CP is connected to the receiver gray line CP. 4. Receiver Blue ...
	Banner Sensors – How ultrasonic sensors work PEOPLE CAN HEAR THE SOUND DUE TO THE OSCILLATION OF THE OBJECT, ITS FREQUENCY IS IN THE RANGE OF 20HZ-20KHZ, BEYOND 20KHZ IS CALLED ULTRASOUND, BELOW 20HZ IS CALLED INFRASOUND. THE COMMONLY USED ULTRASONIC FREQUENCY IS TENS OF KHZ-TENS OF MHZ. Ultrasonic is a type of mechanical vibration in an elastic medium ...
	A brief analysis of the static characteristics of the sensor The static characteristics of a sensor refer to the performance of the sensor in a static state, which is an important indicator to measure the sensor. The static characteristics of a sensor include linearity, repeatability, hysteresis, accuracy, sensitivity, threshold and resolution, drift, and more. 1. Linearity refers to the sensor measurement ...
	Banner Sensors - Introduction to the classification of infrared sensors Common infrared sensors can be divided into thermal sensors and photonic sensors. 1. Thermal sensor The thermal sensor is the use of incident infrared radiation to cause the temperature change of the sensor, and then make the relevant physical parameters change accordingly, by measuring the change of the relevant physical parameters to determine the ...
	Banner Sensors – What is the role of sensors in the industrial sector? 1. Application in industrial automatic detection and automatic control system Sensors play an extremely important role in industrial automation production. In the petroleum, chemical, electric power, steel, machinery and other processing industries, sensors are responsible for detecting various information.
	Banner Sensors – Technological development of distributed fiber optic sensors 1. Realize the simultaneous measurement of multiple physical parameters (temperature and strain) or chemical parameters on a single optical fiber; 2. Improve the measurement range of the measurement system and reduce the measurement time; 3. Improve the detection ability of the signal receiving and processing system, improve the spatial resolution and measurement of the system.
	Banner Sensors – How to Choose a Color Sensor? 1. What is the purpose of the application? 2. What are the existing power supply types? AC or DC? What is the rated voltage? 3. What equipment should be controlled by the detection system? Conveyor or inspection system? 4. What is the output load? 5. What is the working speed of the required system? In order to...
	Banner Engineering introduces a new Q2XAF150 background suppression photoelectric sensor Banner Engineering Introduces New Q2XAF150 Background Suppression Photoelectric Sensor! Q2X is a compact photoelectric sensor, which enhances the anti-interference ability of energy-saving lamps, and the crosstalk immunity algorithm allows the two sensors to be used at close range, which can accurately and reliably detect the orientation of small parts, which is suitable for ...
	What problems do Banner laser distance sensors have that need to be solved? (1) When the target to be measured is not perpendicular to the transducer of the sensor. This is because the target of the ultrasonic test must be within an angle of no more than 10° perpendicular to the sensor. (2) When a small beam diameter is required. Because the diameter of the general ultrasonic beam is ...