The spraying robot mostly chooses 5 or 6 degrees of freedom joint structure, the arm has a large space for movement, and can do complex track movements, and its wrist generally has 2-3 degrees of freedom, which can move sensitively. The more advanced painting robot wrist uses a flexible wrist, which can be bent in all directions and rotated, and its action is similar to that of a human wrist, which can easily reach into the inside of the workpiece through a smaller hole and spray its inner surface.
Advantages of painting robots:
First, the flexibility is good.
1. The radius of activity is large and flexible.
2. It can complete the spraying of the inner surface and the outer surface.
3. It can complete the mixed line production of a variety of models, such as the mixed line production of cars, station wagons, pickup trucks and other bodies.
2. Improve the quality of spraying and the use of materials.
1. The profiling spraying track is accurate, and the appearance spraying quality such as the uniformity of the coating film is improved.
2. Reduce the amount of overspraying and cleaning solvent, and improve the utilization rate of materials.
3. Easy to operate and protect.
1. It can be programmed offline, which greatly shortens the on-site debugging time.
2. Plug-in structure and modular planning can complete the rapid installation and replacement of components, which greatly shortens the repair time.
3. The protection of all parts is accessible, which is convenient for protection and maintenance.
Fourth, the equipment utilization rate is high.
1. The utilization rate of reciprocating automatic spraying machine is generally only 40%-60%, and the utilization rate of spraying robot can reach 90%-95%.
The painting robot is generally driven by hydraulic pressure, which has the characteristics of fast action speed and good explosion-proof performance, and can be completed by hand-holding teaching or point display. Painting robots are widely used in automobiles, instruments, electrical appliances, enamel and other process production departments.
|
More on that
|
Epson robot handling precautions
If possible, please transfer the robot with a trolley, etc., under the same conditions as at the time of delivery. Please adhere to the following requirements when unboxing the robot. Qualified operators are required to carry out transfer operations such as rope handling, crane lifting and forklift driving. If carried out by an unqualified operator ...
|
|
Epson robot automatic mode selection
What is Auto Mode (AUTO)?
Automatic mode (AUTO) is suitable for the automatic operation of Epson robot systems.
The following describes the procedure to switch to automatic mode (AUTO).
A: Set the boot mode of EPSON RC+ 7.0 to "Auto" and start EPSON RC+ 7.0...
|
|
Whether the automatic welding robot can weld medium and heavy plates - Epson
The active welding robot is mainly used in the field of construction machinery in the field of construction machinery in practical use cases, which can improve the teaching power, in terms of welding quality, can make the welding parameters modular, and improve the stability of welding quality.
|
|
Analysis of the causes of acoustic noise of switching power supply - Epson
Poor transformer impregnation
Contains unimpregnated standing water. Whine and cause the waveform to have spikes, but the general load can be normal, especially clarify: the greater the output power, the stronger the howling, the lower the power is not necessarily significant. A 72W charger product has a bad load ...
|
|
Advantages of Epson Robotics' open communication CC-Link
CC-Link is a fieldbus network that provides a simple interconnection between control devices (PLCs, computers, sensors, actuators, etc.).
CC-Link is an open communication specification developed to connect various field devices (sensors, actuators, Epson robot controllers, etc.).
|
|
Epson robot program operation
1. Create a new project
1) Click "Project", open the menu of the project shown in the left figure, click "New", open the window shown in the right figure, and open a project (stored in the computer program file)
2. Open a project (stored in the computer ...
|
|
Replacement of the battery of the LS series manipulator encoder - Epson robot
Flip over the cover plate that sits on the base, cut the strip that holds the battery in place, and connect the new battery adapter to the battery plate.
LS series manipulator screw lubricating oil addition process
1. Set the power supply of the controller to ON. Set the motor to ...
|
|
Epson robot four or six axis differences
The reason why the small device robot has won the favor of more and more packaging companies is that it is now capable of various packaging production tasks including devices, including the processing of all materials, such as pick-and-place, loading and unloading, packaging molding and other packaging front-end processes related to the process, as well as labeling.
|
|
What are the main points to pay attention to when installing Epson robots and the environment?
warn
By unplugging the power supply, the power supply of the Epson robot system is enclosed. Be sure to connect the AC power cable to the power plug and never directly to the factory power supply.
Be sure to close the robot with ...
|
|
Epson four-axis robot routine maintenance
1. Back up the on-site robots
2. Preparation of things and accessories
3. Robot screw scrubbing
4. The robot screw makes up for the grease
5. Robot cable and belt detection
6. Robot body battery ...
|
|
Key skills for Epson industrial robots
(1) Open and modular control architecture: the distributed CPU computer structure is selected, which is divided into robot manipulator (RC), motion manipulator (MC), optoelectronic isolation I/O control board, sensor processing board and programming teaching box. Robot Manipulator (RC) & Programming Teaching ...
|
|
Epson "GYROPLUS Technology" servo control
Prosthet has developed "GYROPLUS Technology" as a servo control, using a first-of-its-kind gyroscope sensor to measure the robot's arm movements, and has developed a technology that enables the robot to move at high speed and stop immediately.
This skill can effectively reduce residual oscillations and shorten the robot's ...
|
|
Precautions for safe operation of industrial robots - Epson
Whenever you enter the working scale of the robot, it can cause serious damage. Only trained and certified personnel are required to enter the area. What should I pay attention to in the safe operation of industrial robots?
1. System security:
Because the machine ...
|
|
Explanation of Epson robot programming
1 Create a new project
1) Click "Project" to open the project menu shown in the left figure, and click "New" to open the window shown in the right figure
2 Open an item (stored in a computer program file)
1) Single ...
|
|
How to choose an Epson robot?
EPSON industrial robot is an important member of the industrial robot market, and has made important contributions to the development of China's automation industry. So how should equipment designers select EPSON robots?
Generally speaking...
|
|
Epson Robotics fieldbus I/O system operation
Supports industry-standard fieldbus I/O systems, supports DeviceNet, EtherNet/IP, Profibus, CC-Link, provides master-slave devices, and is fully integrated into the Epson Robotics RC+ development environment.
Fieldbus I/O is used in factories around the world with the intention of reducing ...
|
|
Factors should be considered when choosing a robotic system
By considering each application, when the system is installed in the future, you will be able to confirm that all aspects of the application are what you need and prevent serious overruns due to possible mistakes. Elements to consider are:
Load（ ...
|
|
Cartesian coordinate robot advantages - Epson
1. Arbitrarily combined into various styles: each linear motion axis is up to 6 m, and its load can be from 10kg to 200k g. In actual use, there are nearly 100 kinds of Cartesian coordinate robots, which can also be arbitrarily combined into new structures.
...
|
|
Common faults of Epson SCARA robot teach pendants
1. Poor or partial contact of the robot teach pendant (replacement of contact panel)
2. The robot teach pendant is not visible (repair or replace the internal motherboard or LCD screen)
3. Robot teach pendant is defective, vertical wire, vertical belt, blurred screen, broken screen, etc. (replace LCD screen)
...
|
|
Technical characteristics of Epson assembly robots
First of all, the device robot has the ability to control precise movements. They use advanced sensors and control systems that can sense and adjust their movements in real time. The device robot can be accurately positioned and motion controlled to complete high-precision device operation. They can be inserted precisely ...
|
|
Contact
working hours
