How to set the login password through 'user rights management' on Kunlun Tongtai touch screen

From the perspective of skill principle, the touch screen is a set of clear affirmative coordinate positioning system, first of all, it is necessary to ensure that it is transparent, so it is necessary to deal with the problem of transparency through information technology, such as digitizers, writing boards, elevator switches, they are not touch screens; Secondly it is Ken ...

The five-wire resistive touch panel is composed of two layers: (1) ITO Glass: A piece of glass or plexiglass is used as the substrate, and the surface is coated with a transparent conductive layer. (2) ITO polyester plastic layer (ITO Film): The surface is hardened to make the surface smooth and ...

The user usage system generated by the embedded version of MCGS consists of five parts: the main control window, the equipment window, the user window, the real-time database and the operation strategy. 1. Main control window: the main structure of the use system is structured. Used for ...

merit The advantage of resistive touch screen is that its screen and control system are relatively cheap, and the response sensitivity is very good, and whether it is a four-wire resistance touch screen or a five-wire resistance touch screen, they are a kind of working environment that is completely isolated from the outside world, not afraid of dust and water vapor, and can adapt to various ...

1. If you are using a capacitive touch screen, then it is recommended that you first install the driver required for the capacitive touch screen correctly according to the requirements of the manual when you use it for the first time, and then click "Start"/"Program"/"Microtouch Touc" on the screen with your fingers.

The writing of the variable address of Kunlun Tongtai touch screen depends on the communication protocol and communication method used. In general, the variable address of the touch screen is communicated through the Modbus protocol, and the address can be written in the following ways: 1. For Modbus RTU communication mode, change ...

1. Failure regarding touch deviation If it is the position touched by the finger that does not coincide with the mouse arrow. Then you should install the driver and correct the position without touching the bullseye vertically. and re-correct the position. If some areas are touched accurately, some areas ...

The difference between capacitive screen and resistive screen is different in its working principle, touch technology, use environment, cost and life, and then I will explain it to you in detail: How it works Capacitive touch: works by using the body's current induction. When the finger touches on the metal layer ...

Accuracy: Accuracy can be defined as the maximum positioning error in a predefined touchscreen area, measured in the straight-line distance between the actual position of the finger and the measured position. When measuring accuracy, a simulated or mechanical finger is used. Fingers placed on the panel with a ...

1. Do not hit with metal objects. Usually the HMI will be covered with a layer of glass to protect the screen and make it easy to touch. However, the glass is fragile, do not hit the screen with metal objects during use, it is easy to cause the glass to be scratched or broken. 2. Avoid squeezing the screen with heavy objects. Around HMI ...

41. How to implement pop-up sub-windows This is achieved using the OpenSubWnd() function, which is described in the MCGS help document. 42. After power failure, save it as the initial value of the next boot Use it in the script of the exit strategy! SaveSingleDataInit() and ! FlushDat ...

First of all, let's take a look at the interface settings of the Kunlun Tongtai touch screen. 1. Click on the device window to enter the Add PLC 2. First add a TCP parent serial port, and add a 5U device below 3. Double-click the TCP parent device to learn the settings, and enter the IP of the touch screen itself...

advantage 1. Durability The material used in the capacitive sensor interface solution is the same as that of the RTS, which is based on polyethylene terephthalate (PET) with an additional layer of indium tin oxide (ITO). However, capacitive sensors do not have the optical problems and durability problems of RTS, because ...

Nowadays, intelligent technology is developing rapidly, and the scene of human-computer interaction can be seen everywhere, whether it is a computer used at work or a self-service terminal in the day, these are all touchscreen all-in-one machines around you. With the rapid development of the Internet and IOT, the touch screen all-in-one machine is used as a human ...

66. Mitsubishi PLC: How to choose the driver for programming port communication Mitsubishi PLC programming port is 422 communication, and Mitsubishi FX series programming port is selected; The 232BD is driven by Mitsubishi FX series programming port; The 485BD is driven by Mitsubishi FX series serial port. 67. Mitsubishi PLC: Programming port parameter setting ...

Fault 1: Touch deviation Phenomenon: The position of the finger does not coincide with the mouse arrow. Analysis: After installing the driver, there was no vertical touch to the bullseye center position when correcting the position. Solution: Recalibrate the position. Fault 2: Touch ...

1. First of all, open the installed MCGS configuration software. 2. Next, click on the New Project menu under the Choose File menu. 3. Finally, under the type menu, select the touch screen model that matches the project and install it on the Kunlun Tongtai touch screen instrument. ...

One. The touch screen is not allowed Fault phenomenon: A surface acoustic wave touch screen, touching the part of the monitor screen with your finger can not complete the corresponding operation normally. Fault analysis and processing This phenomenon may be the reflection of the sound wave touch screen around the screen after a period of use.

After receiving the touch signal, the capacitive touch screen converts the touch data into electrical pulses and transmits it to the touch screen control IC for processing. The signal is amplified by a low-noise amplifier (LNA), then converted and demodulated by analog-to-digital ratio, and finally sent to a DSP for data processing. Electricity...

Fault 1: Touch deviation Phenomenon: The position of the finger does not coincide with the mouse arrow. Analysis: After installing the driver, there was no vertical touch to the bullseye center position when correcting the position. Solution: Recalibrate the position. Fault 2: Touch ...