The programmed touch screen, how to install the program on the Kunlun Tongtai touch screen

1. Set up groups and users The presentation software is: The menu bar > tools > user rights management Click 'Add User Group' to add a group, here I create two groups "Administrator", "Engineer" group is completed, and then add a user, create a password to complete! (Belong to the user group to ...

1. The capacitive touch screen only needs to touch, and no pressure is needed to generate a signal. 2. Capacitive touch screen only needs to be corrected once or not at all after production, while resistive technology requires conventional correction. 3. The life of the capacitive solution will be longer, because the part in the capacitive touch screen ...

Classification of capacitive touch screens Capacitive touch screens are divided into two categories, one is surface capacitive touch screen, and the other is projected capacitive touch screen, and projected capacitive can also be subdivided into self-capacitive and mutual capacitive. Among them, the surface capacitive and projected self-capacitive touch screen can only achieve ...

What is the reason why the variable cannot be deleted? Use the Usage Count Check command to check variable usage, and then you can delete variables that aren't being used. If a variable cannot be deleted, it means that the variable is in use and cannot be deleted. Is it possible to view the device while it is running?

Screen structure: ITO Film is attached to ITO Glass, and is isolated by DOT points in the middle Outlet cable: integrated with the panel Connector: 2.54mm pitch socket, standard AMP87499-9 Touch media: fingers, gloved hands, pens, credit cards, etc ...

The capital boost under the "Internet +" has profoundly affected the thinking mode of the commercial society and the consumption habits of the material world, and it is also the rapid penetration and subversion of traditional industries. In fact, as the intersection of the industrial control industry and the Internet, the marketing model of the HMI industry is being adopted by innovators.

Fault 1: Touch deviation Phenomenon: The position of the finger does not coincide with the mouse arrow. Analysis: After installing the driver, there was no vertical touch to the bullseye center position when correcting the position. Solution: Recalibrate the position. Fault 2: Touch ...

(1) Black screen, blurred screen, white screen (2) Caused by the aging of the LCD screen, the high voltage is low, and the lamp is aging (3) The LCD screen has no display, and the brightness is not clear (4) The LCD screen displays vertical bars and horizontal bars (5) Communication connection failure (6) Start the boot half without moving ...

Open Kunlun Tongtai touch screen software, create a new [Window 0], and click to open. Find the Bitmap icon in the toolbox and click to open it. After creating a bitmap in Window 0, right-click and select Load Bitmap. Open the text where the image is saved ...

Infrared touch screen The infrared touch screen selects the infrared matrix densely packed in the X and Y directions to detect and locate the user's contact, the infrared touch screen is provided with a circuit board frame on the front side of the display, and the circuit board is equipped with an infrared emitting tube and an infrared receiving tube on the four sides of the screen.

Small capacity: The speculative configuration of the whole system requires only a very small storage space, which can be easily used with DOC storage devices; High speed: The system has high time control accuracy, and can easily complete various high-speed acquisition systems to meet the requirements of real-time control systems. Low cost: ...

TPC1561HI common fault phenomenon of Kunlun Tongtai touch screen operation panel (1) Black screen, blurred screen, white screen (2) Caused by the aging of the LCD screen, the high voltage is low, and the lamp is aging (3) The LCD screen has no display, and the brightness is not clear (4) LCD screen display vertical bar, display ...

merit The advantage of resistive touch screen is that its screen and control system are relatively cheap, and the response sensitivity is very good, and whether it is a four-wire resistance touch screen or a five-wire resistance touch screen, they are a kind of working environment that is completely isolated from the outside world, not afraid of dust and water vapor, and can adapt to various ...

1. Tap the settings icon in the top right corner of the screen to enter the settings menu. 2. Find the "Time Settings" option in the menu and click to enter. 3. On the time settings screen, you can manually modify the current date and time. There is also the option to automatically get the time so that the device ...

1. First of all, go to the MCGS official website to download the latest embedded version, and you can find the PPI of S7-200 in the "Equipment Toolbox", which is compatible with the driver of Siemens SMARTPLC. 2. Secondly, all non-board equipment in Kunlun MCGS is the first to pass ...

Nowadays, intelligent technology is developing rapidly, and the scene of human-computer interaction can be seen everywhere, whether it is a computer used at work or a self-service terminal in the day, these are all touchscreen all-in-one machines around you. With the rapid development of the Internet and IOT, the touch screen all-in-one machine is used as a human ...

advantage 1. Durability The material used in the capacitive sensor interface solution is the same as that of the RTS, which is based on polyethylene terephthalate (PET) with an additional layer of indium tin oxide (ITO). However, capacitive sensors do not have the optical problems and durability problems of RTS, because ...

In May, ten seminars in East China and North China had just ended, and in June, Kunlun Tongtai attacked again, continuing the enthusiasm of Red May to June. The sky is blue and the clouds are white, and the Kunlun Tongguo Seminar (Beijing) Shunyi special session opened. On June 12, 2015, Kunlun Tongtai 2015 Seminar - Beijing

61. 200PLC: What is the reason for the communication status jump (1) Whether the communication delay setting is too short, and set the appropriate delay time; (2) Whether there is interference on site, shielded wire and grounding can be used; (3) Refer to PLC "SMW22", see PLC running program ...

1. Check the wiring port: first check whether the wiring interface is loose, and then check whether there is a conflict between the serial port and the interrupt number, if there is a conflict, the resources should be adjusted to avoid the conflict. Then check whether there are cracks on the surface of the industrial touch screen, and replace them in time if there are cracks. It is also necessary to check the touch screen ...