Common Problems and Solutions of Communication of Kunlun Tongtai MCGS Touch Screen(66-69)

advantage 1. Durability The material used in the capacitive sensor interface solution is the same as that of the RTS, which is based on polyethylene terephthalate (PET) with an additional layer of indium tin oxide (ITO). However, capacitive sensors do not have the optical problems and durability problems of RTS, because ...

(1) Black screen, blurred screen, white screen (2) Caused by the aging of the LCD screen, the high voltage is low, and the lamp is aging (3) The LCD screen has no display, and the brightness is not clear (4) The LCD screen displays vertical bars and horizontal bars (5) Communication connection failure (6) Start the boot half without moving ...

1. Check the wiring port: first check whether the wiring interface is loose, and then check whether the serial port conflicts with the interrupt number. If a conflict occurs, adjust resources to avoid it. Check the surface of the industrial touch screen again for cracks, and replace it in time if so. At the same time, inspect the surface of the industrial touch screen ...

The McgsPro architecture is divided into three parts: configuration environment, simulated operation environment, and operation environment. The configuration environment and the simulated operating environment are equivalent to a complete set of tools and software, which can be run on a PC. Users can ...

1. Variables in the real-time runtime cannot add channels and send data using functions at the same time. 2. In the universal serial port parent device, the COM port indicates whether to select 232 or 485, and in the touch COM1 indicates the 232 interface, and COM2 represents the 485 interface. 3. View the touch ...

The difference between capacitive screen and resistive screen is different in its working principle, touch technology, use environment, cost and life, and then I will explain it to you in detail: How it works Capacitive touch: works by using the body's current induction. When the finger touches on the metal layer ...

1. Touch screen (touchscreen), also known as "touch screen" and "touch panel", is an inductive liquid crystal display device that can receive input signals such as contacts.

The writing of the variable address of Kunlun Tongtai touch screen depends on the communication protocol and communication method used. In general, the variable address of the touch screen is communicated through the Modbus protocol, and the address can be written in the following ways: 1. For Modbus RTU communication mode, change ...

In May, ten seminars in East China and North China had just ended, and in June, Kunlun Tongtai attacked again, continuing the enthusiasm of Red May to June. The sky is blue and the clouds are white, and the Kunlun Tongguo Seminar (Beijing) Shunyi special session opened. On June 12, 2015, Kunlun Tongtai 2015 Seminar - Beijing

Infrared touch screen The infrared touch screen selects the infrared matrix densely packed in the X and Y directions to detect and locate the user's contact, the infrared touch screen is provided with a circuit board frame on the front side of the display, and the circuit board is equipped with an infrared emitting tube and an infrared receiving tube on the four sides of the screen.

81. What are the main characteristics of 128M TPC? (1) CE platform upgrade Using WINCE 5.0 operating system, user operation methods and habits are the same as those of the previous CE 4.2 system; (2) Hardware storage device upgrade The total storage data capacity of the product has increased from the existing 6 ...

The five-wire resistive touch panel is composed of two layers: (1) ITO Glass: A piece of glass or plexiglass is used as the substrate, and the surface is coated with a transparent conductive layer. (2) ITO polyester plastic layer (ITO Film): The surface is hardened to make the surface smooth and ...

Fault 1: Touch deviation Phenomenon: The position of the finger does not coincide with the mouse arrow. Analysis: After installing the driver, there was no vertical touch to the bullseye center position when correcting the position. Solution: Recalibrate the position. Fault 2: Touch ...

In 2015, when the automation industry entered the new normal, the HMI industry broke out of the cocoon, and as the leader of the local HMI, Kunlun Tongtai began to attack in March and traveled around China in a huge momentum of roving seminars. Fans gathered, big coffee reviews, player support, broke out 18 ...

Kunlun General Configuration Software is a very professional general configuration software. It has full Chinese visualization effects, supports progressive color adjustment, rotation animation effects, and supports temperature control curves and many other industrial control curves, compatible with a full range of Kunlun hardware products, which can save users a lot of time.

Classification of capacitive touch screens Capacitive touch screens are divided into two categories, one is surface capacitive touch screen, and the other is projected capacitive touch screen, and projected capacitive can also be subdivided into self-capacitive and mutual capacitive. Among them, the surface capacitive and projected self-capacitive touch screen can only achieve ...

One. The touch screen is not allowed Fault phenomenon: A surface acoustic wave touch screen, touching the part of the monitor screen with your finger can not complete the corresponding operation normally. Fault analysis and processing This phenomenon may be the reflection of the sound wave touch screen around the screen after a period of use.

Inaccurate screen position: Repositioning can be done via driver software. Touch position and screen cursor upside down: When installing the touch screen, the position of the screen is reversed, please adjust the touch screen position according to the principle of right-hand position out. The touchscreen display icon keeps pointing towards the fixed ...

Merit: 1. Novelty in operation. The capacitive touch screen supports multi-touch, making operation more intuitive and fun. 2. It is not easy to touch by mistake. Since the capacitive touch screen needs to sense the current of the human body, only the human body can operate it, and it will not be touched with other objects.

1) Check whether the connection of the touch screen is right, and whether one of the wires connected to the keyboard port of the host (take the working voltage of 5 volts touch screen from the keyboard port) is connected, please check the connection. 2) Observe the situation of the touch screen control box light, if it is not lit or the red light is on, it means that the control box is broken, please change it.