Kunlun Tongtai TPC1262HI a common fault phenomenon of touch screen

1. Open the Kunlun touch screen programming software and select the [press button] that needs to add a script in the window menu. 2. In the pop-up [Standard Button Widget Attribute Settings] window, select [Script] and click Open. 3. In the [Script] menu, select [Typing] ...

1. After the MCGS screen is connected to the computer (USB connection, network cable connection is acceptable), in the download configuration window, click on the advanced operation, and there is a running environment upgrade button inside, click it, and wait for the upgrade to be completed. 2. In the download configuration window, click to make a U disk comprehensive function treasure, and then ...

70. Omron PLC: Parent device parameter settings (1) The communication parameter setting of the parent device of the universal serial port should correspond to the communication parameter setting of the PLC serial port, and the default standard parameters of the PLC are set to: 9600, 7, 2, E (even check); (2) Users can set it according to their needs, and it is recommended to ...

86. How to perform touch calibration on TPC (1) Enter the TPC CE operating system and double-click the "Touch Screen Calibration" icon on the desktop for calibration; (2) Power on TPC, click the startup progress bar to enter the startup properties window, do not do anything, and the system will automatically enter the touch after 30 seconds.

In order to improve the anti-interference ability of the PLC system, we should start from the design. In the anti-interference design of specific projects, products with strong anti-interference ability can be selected to improve the anti-interference of equipment and systems by suppressing interference sources, cutting off or attenuating the transmission path of electromagnetic interference, and using software means.

96. How to check the status of the PC connection to the TPC network? Connect the PC to TPC with a network swap cable, click "Start-Run" on the PC, enter CMD enter in the run bar, and then enter the ping IP address in the DOS interface.

1. Stuff preparation 1. 1 Phillips screwdriver; 2. 1 small slotted screwdriver; 3. 1 hair dryer; 4. Several transparent double-sided tapes. Second, the old screen is dismantled 1. Use a Phillips screwdriver to remove the 6 screws on the back cover and open the back cover. 2. ...

1. If you are using a capacitive touch screen, then it is recommended that you first install the driver required for the capacitive touch screen correctly according to the requirements of the manual when you use it for the first time, and then click "Start" / "Programs" / "Microtouch" on the screen with your fingers.

Kunlun Tongtai touch screen is a touch screen controller, which is generally used in embedded systems, such as industrial computers, embedded computers, intelligent terminals, etc. If you want to connect it to your computer to run, you can try the following methods: 1. USB interface: Kunlun Tongtai touch screen ...

1. Clear the configuration engineering password process (1) Record customer information: including the name of the unit, the name of the customer, the contact number, ask the customer for the configuration project and require the customer to provide the certificate with the official seal and the purchase channel; Attestation File Format: Our company is XXX, ...

1. Processor: Intel Celeron J1900 quad-core processor, frequency 2.0GHz, stable and reliable performance. 2. Operating system: Support Windows, Linux and other operating systems, and provide pre-installed software (such as remote monitoring software). 3. Display: 7 inch T...

Balance, simplicity and coordination are the three key points of industrial touch screen all-in-one design, among which: Balance: Ensure that all objects on the screen, such as windows, buttons, and slips, have the same style. The size, concave and convex effect of buttons at all levels and the annotation font and font size are consistent, and the color of the button is consistent.

Accuracy: Accuracy can be defined as the maximum positioning error in a predefined touchscreen area, measured in the straight-line distance between the actual position of the finger and the measured position. When measuring accuracy, a simulated or mechanical finger is used. A finger placed on the panel ...

One. The touch screen is not allowed Fault phenomenon: A surface acoustic wave touch screen, touching the part of the monitor screen with your finger can not complete the corresponding operation normally. Fault analysis and processing This phenomenon may be the reflection of the sound wave touch screen around the screen after a period of use.

Four-wire touch screen The four-wire touchscreen contains two resistive layers. One of the layers has a vertical bus on the left and right edges of the screen, and the other layer has a horizontal bus at the bottom and top of the screen, see Figure 1. In order to measure in the X-axis direction, the left side of the bus is offset to 0V, and the right side ...

First of all, on the back of the Kunlun Tongtai touch screen, determine the specific model of the Kunlun Tongtai touch screen. Open the Kunlun Tongtai touch screen programming software, click [File] in the menu bar and open it. In the File drop-down menu, select Project Settings In the pop-up Modify Project ...

1. Do not hit with metal objects. Usually the HMI will be covered with a layer of glass to protect the screen and make it easy to touch. However, the glass is fragile, do not hit the screen with metal objects during use, it is easy to cause the glass to be scratched or broken. 2. Avoid squeezing the screen with heavy objects. Around HMI ...

Ambient light factor, infrared receiver tube has a working range between minimum sensitivity and maximum illumination, but touch screen products can not limit the range of use, from the dark cabaret room to the outdoor use under the high-intensity sunlight on Hainan Island, as a product, it must adapt. Rapid detection ...

1. Do not hit with metal objects. Usually the HMI will be covered with a layer of glass to protect the screen and make it easy to touch. However, the glass is fragile, do not hit the screen with metal objects during use, it is easy to cause the glass to be scratched or broken. 2. Avoid squeezing the screen with heavy objects. Around HMI ...

Advantages of the all-in-one touch screen machine: 1. The touch screen all-in-one machine can complete wireless screen projection, which means that there is no need to spend time connecting and debugging equipment, and everyone can project the content to the touch screen all-in-one machine through their laptop, mobile phone or tablet. Open batch ...