Kunlun Tongtai touch screen - the advantages and precautions for the use of the all-in-one touch machine

1. The touch screen is not allowed to be repaired If it is the position touched by the finger that does not coincide with the mouse arrow. Then you should install the driver and correct the position without touching the bullseye vertically. and re-correct the position. If you touch some areas accurately ...

The first method: use a U disk to make the designed interface into a U disk function package, and then plug it into the touch screen, the touch screen will automatically detect and update it according to the prompts. The second method: use a special download cable for the touch screen, download the program, and it will automatically overwrite the original environment. ...

1. Write a program in the PLC, and when a fault occurs, an alarm signal will be output. The corresponding program can be written with a series of PLCs such as S7-200 or S7-1200. 2. Configure the communication protocol between the PLC and the touch screen. Protocols such as MODBUS or OPC can be used to communicate, specifically ...

Nowadays, intelligent technology is developing rapidly, and the scene of human-computer interaction can be seen everywhere, whether it is a computer used at work or a self-service terminal in the day, these are all touchscreen all-in-one machines around you. With the rapid development of the Internet and IOT, the touch screen all-in-one machine is used as a human ...

Merit: 1. Novelty in operation. The capacitive touch screen supports multi-touch, making operation more intuitive and fun. 2. It is not easy to touch by mistake. Since the capacitive touch screen needs to sense the current of the human body, only the human body can operate it, and it will not be touched with other objects.

Step 1. Backup program: First of all, you need to back up the touch screen program that has broken the original display control. Program files can be copied to a USB or SD card. Step 2. Install a new display touchscreen: Install the new display touchscreen to your computer, then connect the power and data cables. ...

20. The TPC project running environment is automatically restarted If the CPU usage reaches 99% during the project runtime, the runtime environment will automatically exit and then restart. There may be many reasons for high CPU usage: too many bitmaps, too many scripts in the loop policy, and short cycle times. ...

Balance, simplicity and coordination are the three key points of industrial touch screen all-in-one design, among which: Balance: Ensure that all objects on the screen, such as windows, buttons, and slips, have the same style. The size, concave and convex effect of buttons at all levels and the annotation font and font size are consistent, and the color of the button is consistent.

The difference between infrared touch screen and capacitive touch screen is that the infrared touch screen has grooves and is afraid of strong light. This machine is thick and heavy, but it is cheap. The capacitive screen all-in-one machine is more beautiful, lighter and thinner, it is pure flat and easy to implement. 1. Infrared touch screen all-in-one machine Infrared technology ...

After receiving the touch signal, the capacitive touch screen converts the touch data into electrical pulses and transmits it to the touch screen control IC for processing. The signal is amplified by a low-noise amplifier (LNA), then converted and demodulated by analog-to-digital ratio, and finally sent to a DSP for data processing. Electricity...

The main features of the MCGS embedded configuration software 1. Simple and flexible visual operation interface: using full Chinese and visual development interface, in line with the usage habits and requirements of Chinese. 2. Strong real-time performance and good parallel processing performance: it is a real 32-bit system...

First of all, let's take a look at the interface settings of the Kunlun Tongtai touch screen. 1. Click on the device window to enter the Add PLC 2. First add a TCP parent serial port, and add a 5U device below 3. Double-click the TCP parent device to learn the settings, and enter the IP of the touch screen itself...

1. If you are using a capacitive touch screen, then it is recommended that you first install the driver required for the capacitive touch screen correctly according to the requirements of the manual when you use it for the first time, and then click "Start"/"Program"/"Microtouch Touc" on the screen with your fingers.

Small capacity: The speculative configuration of the whole system requires only a very small storage space, which can be easily used with DOC storage devices; High speed: The system has high time control accuracy, and can easily complete various high-speed acquisition systems to meet the requirements of real-time control systems. Low cost: ...

1. Check whether the power supply of the host is working normally. First, check whether the host system is powered by checking whether the power indicator on the host chassis panel is on and whether the power supply fan is rotating. Secondly, use a multimeter to check whether the external voltage meets the requirements, the voltage is too high or too ...

Communication failures are generally due to three factors (1) Communication parameters, such as the COM number of the serial port, baud rate, etc., the IP address of the network port, etc. (2) Communication line, such as RS232 communication, the result is RS485. For example, it is directly connected to the network port, but it is connected to the cross. （3 ...

Kunlun touch screen is a positioning device, the user can directly enter coordinate information by pointing to the computer, just like a mouse and keyboard, it is also an input device. Kunlun touch screen has many advantages such as durability, fast response, space saving, and convenient communication. With this technique, ...

Open Kunlun Tongtai touch screen programming software and select the [Multi-language Configuration] icon in the edit menu In the pop-up Multi-Language Configuration window, select File and click Open. In the Multi-Language Configuration file drop-down menu, select Select Language. ...

Accuracy: Accuracy can be defined as the maximum positioning error in a predefined touchscreen area, measured in the straight-line distance between the actual position of the finger and the measured position. When measuring accuracy, a simulated or mechanical finger is used. A finger placed on the panel ...

1. High degree of stability, will not drift due to changes in time and environment 2. Highly adaptable, not subject to current, voltage and static interference, suitable for some harsh environmental conditions (explosion-proof, dust-proof) 3. High light transmittance, no intermediate medium, up to 100% 4. ...