How to replace the external screen of Kunlun Tongtai touch screen?

1. Do not stack resistive screens, use tray disks. 2. Do not use corrosive organic solvents to wipe the surface of the touch screen film. Such as industrial alcohol, etc. 3. When cleaning the surface of the product, it is necessary to wipe it with a soft cloth (deerskin) dipped in petroleum ether. ...

1. If the user is using a capacitive touch screen, it is recommended that the user first install the driver required for the capacitive touch screen correctly according to the requirements of the relevant manual, and then click "Start"/"Program"/"Micro ...

Four-wire touch screen The four-wire touchscreen contains two resistive layers. One of the layers has a vertical bus on the left and right edges of the screen, and the other layer has a horizontal bus at the bottom and top of the screen, see Figure 1. In order to measure in the X-axis direction, the left side of the bus is offset to 0V, and the right side ...

81. What are the main characteristics of 128M TPC? (1) CE platform upgrade Using WINCE 5.0 operating system, user operation methods and habits are the same as those of the previous CE 4.2 system; (2) Hardware storage device upgrade The total storage data capacity of the product has increased from the existing 6 ...

Kunlun General Configuration Software is a very professional general configuration software. It has full Chinese visualization effects, supports progressive color adjustment, rotation animation effects, and supports temperature control curves and many other industrial control curves, compatible with a full range of Kunlun hardware products, which can save users a lot of time.

1. Wipe the phone screen with a dry cloth before turning it on every day. 2. Drinks or water droplets falling on the screen will cause the software to stop reacting. This is due to the fact that water droplets and fingers have similar properties, and it is necessary to wipe them. 3. Kunlun Tongtai MCGS screen program can be automatically ...

Open Kunlun Tongtai touch screen software, create a new [Window 0], and click to open. Find the Bitmap icon in the toolbox and click to open it. After creating a bitmap in Window 0, right-click and select Load Bitmap. Open the text where the image is saved ...

96. How to check the status of the PC connection to the TPC network? Connect the PC to TPC with a network swap cable, click "Start-Run" on the PC, enter CMD enter in the run bar, and then enter the ping IP address in the DOS interface.

In May, ten seminars in East China and North China had just ended, and in June, Kunlun Tongtai attacked again, continuing the enthusiasm of Red May to June. The sky is blue and the clouds are white, and the Kunlun Tongguo Seminar (Beijing) Shunyi special session opened. On June 12, 2015, Kunlun Tongtai 2015 Seminar - Beijing

Fault 1: Touch deviation Phenomenon: The position of the finger does not coincide with the mouse arrow. Analysis: After installing the driver, there was no vertical touch to the bullseye center position when correcting the position. Solution: Recalibrate the position. Fault 2: Touch ...

When using Kunlun Tongtai touch screen, sometimes for communication requirements, you need to set up a network communication address, so how to set up the network of Kunlun Tongtai touch screen? Let's take a look at it. Power on the Kunlun Tongtai touch screen, tap anywhere on the screen to enter the main interface after the TPC is powered on, ...

1. First of all, open the Kunlun Tongtai touch screen software, find the [User Window] and click to open. 2. Then select [New Window] to create two windows. 3. Then in the page that opens, click [Window 0] to enter the window. 4. Then in the toolbox ...

1. To set the input area and output Q area of Kunlun Tongtai touch screen, you must first open the Kunlun Tongtai touch screen software, find the user window, and click to open. 2. Then select New Window to create two windows. 3. Click window 0 on the page that opens to enter the window. ...

In 2015, when the automation industry entered the new normal, the HMI industry broke out of the cocoon, and as the leader of the local HMI, Kunlun Tongtai began to attack in March and traveled around China in a huge momentum of roving seminars. Fans gathered, big coffee reviews, player support, broke out 18 ...

44. Clear the configuration engineering password flow (1) Record customer information: including the name of the unit, the name of the customer, the contact number, ask the customer for the configuration project and require the customer to provide the certificate with the official seal and the purchase channel; Attestation File Format: Our company is XXX, ...

1. Check the wiring port: first check whether the wiring interface is loose, and then check whether the serial port conflicts with the interrupt number. If a conflict occurs, adjust resources to avoid it. Check the surface of the industrial touch screen again for cracks, and replace it in time if so. At the same time, inspect the surface of the industrial touch screen ...

The writing of the variable address of Kunlun Tongtai touch screen depends on the communication protocol and communication method used. In general, the variable address of the touch screen is communicated through the Modbus protocol, and the address can be written in the following ways: 1. For Modbus RTU communication mode, change ...

The difference between capacitive screen and resistive screen is different in its working principle, touch technology, use environment, cost and life, and then I will explain it to you in detail: How it works Capacitive touch: works by using the body's current induction. When the finger touches on the metal layer ...

1. Processor: Intel Celeron J1900 quad-core processor, frequency 2.0GHz, stable and reliable performance. 2. Operating system: Support Windows, Linux and other operating systems, and provide pre-installed software (such as remote monitoring software). 3. Display: 7 inch T...

The first channel of all non-board devices in Kunlun MCGS is the communication status channel. After entering the running environment, after the device driver starts working, the communication status of the device is returned in this channel, for example, 0 indicates that the device communicates normally, and non-0 indicates that it is abnormal. Elder brother...