Rittal cables – the difference between power cables and control cables

1. The impact of lightning The armor components of the control cable are all metal conductors, and if the power line is short-circuited or lightning hits the metal parts, a strong current will be generated to destroy the optical cable line equipment, and even casualties will occur in serious cases. 2. Optical cable ...

(1) Classified according to the requirements of the power supply system 1) The first-level power distribution equipment is collectively referred to as the power distribution center. They are centrally installed in the substations of the enterprise, and the electrical energy is distributed to the subordinate distribution equipment in different locations. This level of equipment is close to the step-down transformer, so the electrical parameters are high.

Rittal RBT cooling units – the most economical option for you! If a limited budget makes you extremely cost-conscious, then RBT is the choice for your ambition. After large-scale assembly line production, as well as the excellent functions of the cooling unit itself, the RBT has achieved a very high ...

As the "guardian" of the cabinet, the lock system is also an important accessory choice in the cabinet system. Locking systems include fasteners, locks, keys, handles, and cylinders, among others. The lock cylinder refers to the module that is replaced for different locks and keys. 01. Personalized configuration ...

What are the relay protections of small and medium-sized substations? A: A overcurrent protection; B. Current quick-break protection; C. Time-limited current quick break protection; D Low voltage protection. What is the classification of substation monitoring system? A: Manual monitoring, automatic monitoring of telecontrol devices and micro-...

Precautions for the installation and wiring of control cables: 1. Under the eaves. Cables can only be used if they are not directly exposed to sunlight or ultra-high temperatures, and it is recommended to use pipes. Ultraviolet (UV) – Do not apply cables without UV protection to direct sunlight rings ...

1. Set the target temperature: the default temperature of the original factory is 35°C, you can press and hold the set button for more than 1 second after starting, the parameters start to flash, complete the temperature adjustment by pressing the UP and DOWN buttons, and after adjusting to the target temperature, press the set button to store the set parameters. 2. High temperature alarm: ...

1. Site selection. The location of the low-voltage distribution room should be close to the load center, set up in a place with less dust, less corrosive medium, dry and slight vibration, and should appropriately leave room for development; Second, the layout of power distribution equipment. The layout of the distribution equipment in the low-voltage distribution room must follow the principle of safety, safety, and safety.

1. Reliable quality assurance Choosing the right server and cabling cabinet is important, and the slightest negligence can lead to huge losses. No matter which brand of product it is, quality is the first thing that users should consider. 2. Load-bearing guarantee With...

1) Fault phenomenon: The cause of this failure is the protection action. The high-voltage cabinet is equipped with protection against overcurrent, quick cut-off, gas and temperature. 2) Judgment method: The cause of the fault can be judged according to the relay card drop, remote signaling information, etc. After the action of gas and temperature protection in the high-voltage cabinet ...

1. The cabinet door is 25mm from the ground and 2.5mm thick mounting plate, and there are 20mm wide U-shaped curved edges on both sides, which makes the mounting plate stronger and easy to handle. 2. The three cable introduction cover plates at the bottom of the box can be replaced with each other, which is easy to move, easy to import cables, and easy to open holes into the line. 3 ...

External damage: In the process of storage, transportation, laying and operation of cables, they may suffer external damage, especially the directly buried cables that have been run, and are prone to damage in the ground construction of other projects. Such accidents often account for 50% of cable accidents. In order to avoid such accidents, in addition to strengthening the cable ...

Heating, also known as heating, refers to the supply of heat to a building, insisting on a certain indoor temperature. Ventilation – the process of feeding and removing air into a space by natural or mechanical means. Air conditioning - (referred to as air conditioning) is to meet the requirements of production and life, improve labor ...

Carefully push the decorative panel back onto the monitor until you hear it snap into place. · Reinsert the monitor into the panel or blind. · Reinstall the louver pane or panel onto the cabinet air conditioner. Reset the base controller The air conditioner in the cabinet emits a high ...

Five details that are easy to overlook: One of the hidden details: steel The most basic thing of a cabinet is to look at the steel, the Rittal standard cabinet is made of section steel, there are many masters who understand the cabinet to understand, the steel plate must be thick, just knock it with your fingers. General ...

Rittal's outdoor cabinet + temperature control solution provides 1+1 >2 business value, combining the demands of "function and safety" into one, and guarding it in one stop. Whether it's wind, rain, lightning erosion, scorching sun exposure or blizzards, Rittal outdoor system solutions can be used all the way ...

Complete set of electrical maintenance knowledge: 1. Low-voltage distribution cabinet 1. Regularly check whether there are traces of pest activity in each cabinet, and carry out trapping regularly. 2. Check whether the warning signs and maintenance signs are placed correctly. 3. Check whether the emergency tools and lamps are in order.

What is Peak Load? What is trough load? What is Average Load? A: Peak load refers to the maximum load that can occur on the grid and the user in a day. The trough load is the hourly average of the least amount of usage that occurs in the grid and the users in a single day.

Rittal products are divided into: Rittal control cabinets: small enclosures (polycarbonate enclosures PK, junction enclosures KL, compact control enclosures EB, bus enclosures BG), compact control enclosures, plastic control enclosures KS, enclosure systems (subdivided into TS 8/SE 8 family), and...

Rittal toroidal transformer primary connection 115 V/400 V 　　Product Model: 3201.970 Power supply for wall-mounted air/water heat exchangers in 230 V sizes. A 115 V or 400 V main connector is available. Product Description: Wall for 230 V Specification