Key points of maintenance of Omron relays

"It's really nice to receive such an exclusive gift during the pandemic." "I feel that my efforts have been recognized, thank you!" "I've been running around for the health of others, but I didn't expect that some people are silently concerned about our health." This...

Nowadays, the smart lock market has a wide variety of names, and it can't help but give people a sense of "random flowers gradually charming eyes". So, how to choose a cost-effective smart lock? In fact, in smart locks, micro switches can be said to occupy an important position. Microswitches ...

Recently, Omron Automation (China) Co., Ltd. (hereinafter referred to as "Omron") and BYD Co., Ltd. (hereinafter referred to as "BYD") successfully held a technical exchange meeting in Shenzhen. Omron industry and technical experts, BYD automobile, light rail, new energy, electronics ...

1. CPU abnormality: When the CPU is abnormally alarmed, check all the devices connected to the internal bus of the CPU unit. The specific method is to replace the units that may have problems in turn, find out the problem units, and deal with them accordingly 2. Memory abnormality: Memory anomaly ...

Method: If the computer has a 9-pin serial port, then you can make a wire. The wiring is as follows: computer PLC2 --------- 23 --------- 3 5 --------- 9 If you don't have it, you need a USB to serial port cable (you need to install a driver), and you can connect to PLC through the above wire ...

problem 　　At manufacturing sites where social distancing is required, we can increase productivity by reducing the number of workers Due to the pandemic, social distancing was also required on manufacturing sites, and manufacturing with fewer workers had to be achieved quickly. Prior to this, the automatic ...

Operation point one During the installation and operation of Omron micro switches, please remember that the direction of action of the operating mechanism of the switch cannot be reversed, otherwise it is easy to cause the fault of the line. Moreover, the position of the switch should meet the requirements of the control circuit and ensure reliable operation. For micro ...

About installation When installing, disassembling, wiring, and maintaining and inspecting the Omron switching power switch, please try to carry out the switching power supply with the switching power supply OFF. Otherwise, there is a high risk of electric shock or burn damage. About wiring work Please do not switch on the power ...

Omron sphygmomanometer uses oscillometric measurement method to measure blood pressure, with high accuracy, generally about ±5 Pa, and the measurement method is relatively simple. At the same time, there is a 21-time memory function, which can easily grasp the blood pressure change gauge.

1. In the operation of Omron relay, if there is any abnormal sound or other abnormal phenomena, the operation should be stopped immediately, and the professional maintenance personnel should be notified to come for maintenance, and the normal operation can only be put into normal operation after troubleshooting. 2. During the maintenance process, check whether the spring is deformed, old...

Equipment Overview The stack welding machine is mainly used for the overlap welding of monocrystalline and polycrystalline cells in fully automatic crystalline silicon solar cell modules, and is suitable for series welding of small-size crystalline silicon solar cells.

1. The electrical control cabinet installed with PLC should have a clean and dry environment. Moisture-absorbing dry materials should be placed inside, and the splashing of coolant and oil mist should be prevented. 2. Regardless of the system working or shutdown, the electrical cabinet door should always be closed, and the electrical components should be kept in a good state.

The function of Omron automotive Omron relay is consistent with the function of ordinary relays, and the relay plays the role of a switch in the electrical automation industry, that is, by controlling the on/off of one circuit, so as to control the intermediate link of the next circuit on/off. Automotive relays are usually made of electromagnetic or solid...

1. Installation orientation Proper installation orientation is critical to maintaining the best characteristics of the relay. · The installation orientation of the impact resistance idealization is to make the contact point and the moving member (part of the armature) in the fitness movement orientation and the vibration or impact orientation upright, very normally open contact in the electric ...

1. In the operation of Omron relay, if there is an abnormal sound or other abnormal conditions, the operation should be terminated first, and the skilled and professional repair staff should be notified to repair, and the operation can be resumed after the common fault is cleared. 2. In the whole process of maintenance, check the spring ...

1/4 of the machine is not running, but the power indicator is on: Reason: The compressor is overheated, so that the compressor turns on the overheating protection and stops automatically. Exclusion method: If the machine runs for a long time without stopping, suddenly stops one day, and can run again after the machine is turned off and cooled, this is ...

1. Before connecting, determine the voltage required for the proximity switch, and if it is a 3-wire system, determine whether it is PNP type or NPN type. The proximity switch is divided into 2-wire, 3-wire and 4-wire systems. 2. When the wire system proximity switch is connected with the relay, it is in series form. i.e. the relay is connected to the proximity switch ...

The micro switch is a contact mechanism with a small contact spacing and a quick action mechanism, with the specified stroke and the specified force for the switch action, covered with a shell, and a switch with a driving rod outside, because the contact spacing of the switch is relatively small, so it is called a micro switch, also known as a sensitive switch. ...

Process introduction In the traditional die-cutting process, because the cutter cannot cut the material completely, the connecting frame will be left, which increases the cost of the material. In addition, the service life of the die-cutting knife is 1 million times, such as long-term continuous operation, it needs to be replaced and maintained in time, and the maintenance and debugging time is also very long.

Process introduction High-purity gold wire (Au), copper wire (Cu) or aluminum wire (Al) is used to connect the Pad and Lead by soldering. 　　■ PAD is the external contact point of the circuit on the chip ■ Lead is the connection point on the Lead Frame. W/B is the encapsulation process ...