Embedded device is a common installation method, which can make two objects fit together to form a whole, which looks simple, beautiful and does not take up space, which is the popular installation method at present.
In the industrial field, there are a variety of installation methods for industrial displays, including snap-on, wall-mounted, cantilevered, desktop and louvered horizontal. The equipment chamber will select the corresponding device method according to different scenarios, during which embedded devices account for more in electrification equipment, instrumentation, terminal equipment and other scenarios, which is a suitable scenario and is consistent with embedded.
Embedded devices are divided into embedded and external, although they are both embedded, but there are substantial differences. Inlay is to embed the whole device inside another device, and embedded, because there is a thin frame, has the meaning of "inlay", so if you must make a difference between embedding and embedding, then the embedding is inlay, the embedding is inlay, and the two together are "inlay".
Choosing whether to be embedded or embedded is a question that many engineering plans will consider, what factors will determine this choice? In addition to the structure of the device itself, it is also related to the adaptation of the touch industrial display itself to the environment and the matching degree in the use scenario.
There is no rule that it is necessary to use internal or external equipment for which type of equipment is necessary, and the same equipment, different generations, will also present the possibility of changing the external planning, and even the special requirements of the customer to make changes. We can often see self-service terminal equipment in indoor places such as banks, stations, subways, etc., and the selected industrial display is embedded, while indoor places such as airports can also see embedded self-service terminal equipment. The same type of use place will have different displays, and the same type of equipment will also have different plans.
Indoor and outdoor, due to the different environment, will it affect the embedded selection of touch devices?
Now the more common outdoor terminal equipment has express cabinets, self-service retail terminals, charging pile equipment, etc., most of the supporting display equipment is embedded, in order to cope with the outdoor wind and rain environment, there will be an eaves planning above the display, even if the dustproof and waterproof level of many displays can reach IP65, but it can reduce the wear and tear of the display under the long-term exposure of sunlight and ultraviolet rays. In a normal indoor environment, the exterior planning will involve beauty, while in the dusty factory environment, the inline depression will cause dust accumulation, which is not conducive to cleaning and will cause problems with reduced touch sensitivity.
The selection of the embedded inside and outside will also involve the disassembly and repair of the equipment, the terminal equipment is faulty, and it is easier to disassemble the embedded type from the external device; As for the internal device, the entire device is embedded in the terminal device, and the entire device needs to be disassembled.
The external embedding involves the opening device, and the internal embedding is connected with the main equipment of the terminal equipment. When the device is installed, both device methods can be sealed to the device, and there will be no water and ash ingress.
It can be completely blocked, and the use scenarios of industrial displays will be embedded, and the embedding that needs to cope with changes in the external environment is more appropriate.
|
More on that
|
What is the technical principle of Hitec touch screen?
The touch screen senses the contact of our fingers because when the finger touches a specific direction on the screen, it is equivalent to sending a precise electronic signal to the screen. There are many types of contact screens, which are broadly divided into resistive contact screens and capacitive contact screens. Now the most widely used is "electricity...
|
|
The internal composition of the touch screen - Hitec
The interior of the touch screen can be roughly divided into: communication interface unit, driver unit, memory variable unit, and display unit. In addition to the display unit, the other 3 units are invisible to us inside the touch screen.
1. Communication interface ...
|
|
The touch screen is unresponsive after being used for a period of time - Hitec
Problem phenomenon: A contact screen has no response after normal use for a period of time after being turned on.
Problem profiling and processing
1. Check to see if the hard drive is turned off in the "Display Energy Saving Settings" of Wlndows9x. The way to do this is to right-click on the desktop and select the "Properties" ...
|
|
The Hitec touch screen software sets up the application method to run automatically
1. First of all, we work on the SoftPanel program (this program generally does not create shortcuts on the desktop, users can click the [Start Menu] in the lower right corner of the desktop to find the SoftPanel in the list of applications called out).
...
|
|
The PLC and touch screen interact consistently
When the touch screen is connected with the PLC, in fact, the memory of the PLC is used, (the touch screen also has a small amount of memory, which is only used to store system data, that is, the screen, controls, etc.), the touch screen and the PLC communication is generally the master/slave contact, that is, the touch screen reads the data from the PLC, and the judgment is made in the display ...
|
|
The common reason why the touch screen and the PLC cannot communicate - Hitech
1. Whether to select the correct communication protocol (Modbus, PROFIBUS, CANopen, EtherCAT)
2. Whether the communication cable is OK (RS232 RXD TXD GND RS485 A+ B- CANopen CAN_L CAN_H CAN_GND EtherCAT cable) 3. Is the communication parameter correct ...
|
|
How to duplicate the program on two Hitec touch screens
Two HITECH touch screen COPY program methods:
1. Make a communication cable first.
HMI1 COM port HMI2 COM port
25-pin female 25-pin female
RXD 3 -------------------------------- TXD 2
...
|
|
What is the standard for the operation of the touch screen - Hitech
The touch screen must be clear, responsive and stable to be the standard contact display.
Tests that can be performed on your own
Use the checker provided in the driver to check the physical function of the contact screen ...
|
|
The difference between a capacitive screen and a resistive screen
Capacitive touch screen is commonly known as "hard screen", such as iPhone and G1 and other machines use this screen quality, resistive touch screen is commonly known as "soft screen", mostly used in Windows Mobile system mobile phones.
The capacitive touch screen uses the current induction of the human body to operate, and its contact screen is composed of a four-layer composite glass ...
|
|
The reason for the failure of industrial touch screens - Hitech
After clicking on the three corners of the contact screen, enter the offline form (note: different contact screens enter the offline form in different ways). Once in the offline format, click "INITIALIZE", and after clicking, keep clicking "SET-UP-I/O" and then "SET-UP-TOUCH-PANEL". ...
|
|
Precautions for Industrial Touch Screens – Hitech
At present, in the industrial field, intelligent industrial control equipment - programmable logic manipulator (PLC) is widely used in the automatic control of equipment, which brings great convenience to production and daily life. At the same time, visual human-machine interface (industrial touch screen) is also increasingly applied to industrial and agricultural production and its ...
|
|
Key points of use of industrial touch screen all-in-one machine
Storage humidity between 10%-90% Temperature -20°C-60°C If the ambient conditions exceed or approach the critical value, condensation will occur inside the display. The power transformer and other coils inside are also prone to leakage when wet, and may even cause a short circuit in the wiring. If you find that the obvious ...
|
|
Basic functions and selection indicators of human-machine interface
(1) Basic functions:
The operation status of the equipment is displayed, such as indicator lights, buttons, text, graphics, curves, etc.; Data and text input operations, printouts;
Production formula storage, equipment production data recording;
simple logical and numerical operations;
Can...
|
|
Categories and Advantages and Disadvantages of Resistive Touch - Hitech
Resistance contact is divided into four-wire resistance and five-wire resistance contact, the simple difference is four wires and five wires in the functional area.
A constant voltage of 5V is added to each layer of the two-layer transparent metal layer with four-wire resistance analogue technology: ...
|
|
The difference between industrial displays and ordinary displays - Hitech
As a display terminal, the industrial display and the general computer display seem to be very similar in appearance, but in fact, there are great differences between the two in terms of structural planning, material selection and functional characteristics. Today, Freer has been planning the structure of the whole machine, the resolution and the appearance of the role, and the information ...
|
|
Touchscreen alarm display settings
There are two recommended ways to set up the alarm display on the touch screen:
1. Place the alarm window in the template, so that when the alarm occurs, no matter which screen the alarm window is on, it will automatically pop up, so that the operator can obtain the alarm information.
...
|
|
Introduction to Hitec touch screens
HITECH is a *** in Taiwan, known as Hitech in Chinese mainland. It is the *** of Taiwan Quanyi Electronics Co., Ltd., which was established in 1981 and initially produced electronic watches for pens. In order to transform Quanyi into a technology-oriented company, in 1984 began to develop ...
|
|
The advantage of capacitive touch screen - Hitech
The capacitive skill touch screen uses the current induction of the human body to work. The capacitive contact screen is a four-layer composite glass screen, the inner and outer surface of the glass screen and the interlayer are each coated with a layer of ITO, the outermost layer is a thin layer of silica glass protective layer, the interlayer ITO coating is used as the working surface, and the four corners lead to ...
|
|
Touch screen knowledge and testing solutions – Hitech
As an input device, the touch screen has the advantages of easy to use, ruggedness, fast response time, and space saving, and the user can use it directly through the contact screen to complete the operation, without the need for a keyboard or mouse, and is very practical and widely used.
...
|
|
The difference between human-machine interface and touch screen ——— Hitech
Human Machine Interaction (HMI), also known as user interface or user interface, is a preface and dialogue interface for transmitting and communicating information between humans and computers, and is an important part of the computer system. It is the interaction and information gap between the system and the user.
|
|
Contact
working hours
