Banner Sensors – Features of Photoelectric Sensors

Create Date: 2024-8-30 12:03:23|Source: BANNER

1. Long detection distance

If the detection distance of 10 m or more is retained in the through-beam type, it is possible to achieve detection that is not possible with other detection methods (magnetic, ultrasonic, etc.).

2. There are few restrictions on the detected objects

Since the detection principle is based on the detection of light shading and reflection caused by objects, unlike proximity sensors, which limit the detection of objects to metal materials, photoelectric sensing can detect almost all objects such as glass, plastic, wood, and liquids.

3. Short response time

Since the light itself is high-speed, and the circuitry of the sensor is composed of electronic parts, the response time is very short, excluding mechanical operating time.

4. High resolution

High resolution can be achieved by concentrating the projection beam at a small spot through advanced design techniques or by constructing a special light-receiving optical system. It is also possible to detect small objects and detect positions with high accuracy.

5. Non-contact detection can be realized

Detection can be achieved without mechanical contact with the detected object, so there is no damage to the detected object or the sensor. As a result, the sensor can be used for a long time.

6. Color discrimination can be realized

The reflectivity and absorption of the light formed by detecting an object vary depending on the wavelength of the light being emitted and the color combination of the detected object. With this property, the color of the object can be detected.

7. Easy to adjust

In the type of projected visible light, the projected beam is visible to the eye, and the photoelectric guiding system can adjust the position of the detected object.

Banner Sensors – Features of Photoelectric Sensors

More on that

	Banner Sensor - Introduction to the advantages of fiber optic sensors 1. High precision, fast response speed, wide range of linear features, good repeatability of use, high signal-to-noise ratio of detection signal, due to the mass production of optical fiber, low price, can be widely used. 2. The optical fiber is made of dielectric material quartz, which transmits optical signals, so it is safe ...
	Banner Sensors – A common term for pressure sensors Pressure is one of the important parameters in industrial production, and in order to ensure the normal operation of production, it must be monitored and controlled. The following are common terms used when selecting pressure sensors: Standard press The magnitude of the pressure expressed by atmospheric pressure is greater than the atmospheric pressure ...
	Banner Sensors - Introduction to the classification of infrared sensors Common infrared sensors can be divided into thermal sensors and photonic sensors. 1. Thermal sensor The thermal sensor is the use of incident infrared radiation to cause the temperature change of the sensor, and then make the relevant physical parameters change accordingly, by measuring the change of the relevant physical parameters to determine the ...
	Banner Sensors – What parameters need to be considered when selecting an accelerometer? Analog vs Digital Output: This is the first thing to consider. This depends on the interface between your system and the accelerometer. Generally, the analog output voltage is proportional to the acceleration, for example, 2.5V corresponds to 0g acceleration, and 2.6V corresponds to 0.5g acceleration. ...
	Banner Sensor - How and how to select a proximity sensor A proximity sensor is a device with the ability to perceive the proximity of an object, which uses the sensitivity of the displacement sensor to the approaching object to identify the proximity of the object and output the corresponding switching signal. For this reason, proximity sensors are often referred to as proximity switches. It is an alternative to contact detection ...
	Banner Sensors – Applications for Fiber Optic Displacement Sensors 1. Microwave and RF environments 2. Nuclear energy and hazardous environments 3. High temperature and high pressure environment 4. Online monitoring 5. Aerospace applications 6. Civil engineering and geotechnical applications 7. Materials Science ...
	Installation steps for Banner safety light curtains 1. Determine the installation location. Like injection molding machines, hydraulic presses, etc., are generally installed on the front 2 sides, and some non-standard equipment should be determined according to the actual situation to determine the installation position, to achieve the role of protection, without hindering the normal work. 2. Punching. Determine the installation location ...
	What problems do Banner laser distance sensors have that need to be solved? (1) When the target to be measured is not perpendicular to the transducer of the sensor. This is because the target of the ultrasonic test must be within an angle of no more than 10° perpendicular to the sensor. (2) When a small beam diameter is required. Because the diameter of the general ultrasonic beam is ...
	Banner Sensors – What are the classifications of sensors In the field of measurement and control, sensors designed by a certain principle can measure a variety of non-electric power at the same time, and sometimes a non-electric power can be measured by a variety of sensors of different principles, so there are many classification methods for sensors, which can generally be classified according to the following methods. 1. Sort by input ...
	Banner Engineering QCM65 color sensor features introduced Professional color numerical analysis can meet customers' needs for accurate color quality control With a long measuring range of up to 400 mm, the QCM65 series of sensors solves more challenging applications and is a real problem solver. Reliable detection of up to 31 types of ...
	Banner Sensors – The principle of fiber optic sensors There are two measuring principles for fiber optic sensors. (1) The principle of physical optical fiber sensor, which uses the sensitivity of optical fiber to environmental changes to convert the input physical quantity into a modulated optical signal. Its working principle is based on the optical modulation effect of optical fibers, i.e. the optical fiber ...
	Composition of Banner sensors Photoelectric sensors Ordinary detection Groove detection Fiber inspection Laser detection Ambient light source detection Photoelectric buttons Measurement and inspection products Color code and color detection C-GAGE Optical measurement of L-GAGE Ultrasonic measurement ...
	Banner Sensors – Mounting issues with pressure sensors 1. Correct installation method of pressure sensor: (1) Verify the frequency response value of the pressure sensor under normal atmospheric pressure and standard temperature conditions with appropriate instruments. (2) Verify the correctness of the code of the pressure sensor and the corresponding frequency response signal. 2. ...
	Banner Sensors – What is the role of sensors in the industrial sector? 1. Application in industrial automatic detection and automatic control system Sensors play an extremely important role in industrial automation production. In the petroleum, chemical, electric power, steel, machinery and other processing industries, sensors are responsible for detecting various information.
	Banner Sensors - Introduction to the characteristics of fiber optic sensors 1. High precision, fast response speed, wide range of linear features, good repeatability of use, high signal-to-noise ratio of detection signal, due to the mass production of optical fiber, low price, can be widely used. 2. The optical fiber is made of dielectric material quartz, which transmits optical signals, so it is safe ...
	Banner Sensors - An introduction to the four types of proximity sensors Proximity sensors are a class of sensors that use electromagnetic fields, light, and sound to detect the presence or absence of objects. There are many types of proximity sensors, each of which is suitable for a specific application. 1. Inductive proximity sensor The operation of inductive proximity sensors ...
	Banner Sensors – Classification and application of sensors 1. Resistive sensors The basic principle of a resistive sensor is to convert the measured change into a change in the resistance value of the sensing element, and then turn it into an electrical signal output through the conversion circuit. Applications: 1. Strain resistance sensor, used to measure tensile and compressive stress, and other physical quantities based on this...
	Banner Sensors - Applications and Considerations for Infrared Sensors Infrared sensors are sensors that use the physical properties of infrared rays to make measurements. Infrared, also known as infrared light, has the properties of reflection, refraction, scattering, interference, absorption, etc. Any substance that has a certain temperature above absolute zero can radiate infrared rays. ...
	Banner Sensors - An introduction to the classification of fiber optic sensors According to the modulation form of the light measured object, it can be divided into: intensity modulation type, polarization state type, phase type and frequency type; According to whether the light interferes or not, it can be divided into: interference type and non-interference type; Depending on whether it is possible to continuously monitor the measured as the distance increases, it can be divided into ...
	Banner Sensors – Classification and Advantages and Disadvantages of Infrared Sensors Infrared sensor is a kind of sensor that uses infrared rays to process data, which has the advantages of high sensitivity, and the infrared sensor can control the operation of the driving device. Infrared sensors are commonly used for non-contact temperature measurement, gas composition analysis and non-destructive testing.