MCGS Embedded is the main function of the configuration software

1. Connect the touch screen with the PLC We know the communication between two pieces of hardware, whether wireless or wired. The first step is to establish a connection. The most common connection between PLC and touch screen is serial data cable connection. The data cable can be used in a treasure ...

Classification of capacitive touch screens Capacitive touch screens are divided into two categories, one is surface capacitive touch screen, and the other is projected capacitive touch screen, and projected capacitive can also be subdivided into self-capacitive and mutual capacitive. Among them, the surface capacitive and projected self-capacitive touch screen can only achieve ...

The difference between capacitive screen and resistive screen is different in its working principle, touch technology, use environment, cost and life, and then I will explain it to you in detail: How it works Capacitive touch: works by using the body's current induction. When the finger touches on the metal layer ...

merit The advantage of resistive touch screen is that its screen and control system are relatively cheap, and the response sensitivity is very good, and whether it is a four-wire resistance touch screen or a five-wire resistance touch screen, they are a kind of working environment that is completely isolated from the outside world, not afraid of dust and water vapor, and can adapt to various ...

Inaccurate screen position: Repositioning can be done via driver software. Touch position and screen cursor upside down: When installing the touch screen, the position of the screen is reversed, please adjust the touch screen position according to the principle of right-hand position out. The touchscreen display icon keeps pointing towards the fixed ...

Merit: 1. Novelty in operation. The capacitive touch screen supports multi-touch, making operation more intuitive and fun. 2. It is not easy to touch by mistake. Since the capacitive touch screen needs to sense the current of the human body, only the human body can operate it, and it will not be touched with other objects.

1. Processor: Intel Celeron J1900 quad-core processor, frequency 2.0GHz, stable and reliable performance. 2. Operating system: Support Windows, Linux and other operating systems, and provide pre-installed software (such as remote monitoring software). 3. Display: 7 inch T...

1) Check whether the connection of the touch screen is right, and whether one of the wires connected to the keyboard port of the host (take the working voltage of 5 volts touch screen from the keyboard port) is connected, please check the connection. 2) Observe the situation of the touch screen control box light, if it is not lit or the red light is on, it means that the control box is broken, please change it.

The difference between infrared touch screen and capacitive touch screen is that the infrared touch screen has grooves and is afraid of strong light. This machine is thick and heavy, but it is cheap. The capacitive screen all-in-one machine is more beautiful, lighter and thinner, it is pure flat and easy to implement. 1. Infrared touch screen all-in-one machine Infrared technology ...

1. How to check the communication status of the device in MVGS Among all non-board devices (except for some customized devices) of MCGS, *** channels are communication channels. That is, after entering the runtime environment, after the device driver starts working, the ...

Ambient light factor, infrared receiver tube has a working range between minimum sensitivity and maximum illumination, but touch screen products can not limit the range of use, from the dark cabaret room to the outdoor use under the high-intensity sunlight on Hainan Island, as a product, it must adapt. Rapid detection ...

1. Do not hit with metal objects. Usually the HMI will be covered with a layer of glass to protect the screen and make it easy to touch. However, the glass is fragile, do not hit the screen with metal objects during use, it is easy to cause the glass to be scratched or broken. 2. Avoid squeezing the screen with heavy objects. Around HMI ...

1. Check the terminal port First, check whether the wiring interface is loose, and then check whether there is a conflict between the serial port and the interrupt number, if there is a conflict, the resources should be adjusted to avoid the conflict. Then check whether there are cracks on the surface of the industrial touch screen, and replace them in time if there are cracks. It is also necessary to check the contact ...

1. Embedded touch screen structure At present, the touch screen basically adopts an external structure, and the display module and the touch module of this structure are two relatively independent devices, and then the two devices are integrated through the back-end lamination process, but this relatively independent external structure will affect the ...

First of all, on the back of the Kunlun Tongtai touch screen, determine the specific model of the Kunlun Tongtai touch screen. Open the Kunlun Tongtai touch screen programming software, click [File] in the menu bar and open it. In the File drop-down menu, select Project Settings In the pop-up Modify Project ...

1. First of all, go to the MCGS official website to download the latest embedded version, and you can find the PPI of S7-200 in the "Equipment Toolbox", which is compatible with the driver of Siemens SMARTPLC. 2. Secondly, all non-board equipment in Kunlun MCGS is the first to pass ...

47. There are very few drivers in Device Manager (1) Whether to select "All Driver Installation" when configuring the software installation, if not, you need to reinstall the driver; (2) If you don't find a supported driver in the device window of the configuration software, check whether the device supports the standard ...

91. How to update the TPC splash screen After the project is downloaded and the communication test is successful, click "Advanced Operation", in the advanced operation dialog box, select the corresponding file to replace the startup screen, and then click the "Change Startup Screen" button. Note: The splash screen is set ...

1. TPC1262HI common fault phenomenon of Kunlun Tongtai touch screen (1) Black screen, blurred screen, white screen (2) Caused by the aging of the LCD screen, the high voltage is low, and the lamp is aging (3) The LCD screen has no display, and the brightness is not clear (4) LCD screen display vertical bar, display horizontal bar ...

1. Do not stack resistive screens, use tray disks. 2. Do not use corrosive organic solvents to wipe the surface of the touch screen film. Such as industrial alcohol, etc. 3. When cleaning the surface of the product, it is necessary to wipe it with a soft cloth (deerskin) dipped in petroleum ether. ...