Choice of temperature sensors – Turck

Stronger, faster, farther: Turck's expanded Li sensor breaks through the constraints of linear displacement measurement Linear displacement sensor with shock resistance up to 200G Turck's new Li linear position sensor is capable of ...

What is the principle of piezoresistive pressure sensors? Piezoresistive sensors refer to sensors made of the piezoresistive effect of monocrystalline silicon materials and integrated circuit technology. After the monocrystalline silicon data is subjected to the action of force, the resistivity changes, and the proportional force can be obtained according to the measurement circuit.

Photoelectric switch is the abbreviation of photoelectric proximity switch, which uses the detection object to block or reflect the beam, and the circuit is turned on by the synchronous loop, and then the presence or absence of the object is detected. Objects are not limited to metal, and all objects that reflect (or block light) can be detected. Light...

1. Recognize the type of pressure sensor (1) Electromechanical: The internal mechanical structure of the product, the pressure sensor made of springs, levers, dispatching screws, metal housings, etc., and contact module equipment, does not contain processing circuits inside, and the output is the pressure switch side of the switching quantity.

When calibrating the pressure, we need to zero the current of the transmitter, and then carry out the positive and negative relocation of the zero point according to the requirements, if the pressure transmitter is calibrated for the first time, then we also need to add the measured physical quantity calibration, and the subsequent calibration can be calibrated by manual operation. ...

Robots are chaotic machines controlled by computers with similar physical and sensory functions as human beings. Flexible action program; There is a certain level of intelligence; Able to work without relying on human manipulation. So in general, what are the primary sensors that robots contain? ...

** is the pressure, the transmitter can't lose it. In this case, look at the pressure connector to see if it leaks or is clogged, if it admits not, look at the wiring and see if the power supply is normal, simple pressure to determine if the output has changed, or if there is an output at the zero point of the sensor, ...

Since the beginning of the 60s, China has made great progress in the research and development, design, production, and reliability improvement of sensors after the national research and development from the "Sixth Five-Year Plan" to the "Ninth Five-Year Plan", and has initially formed a system of sensor research, development, production and use.

1. Program selection Before selecting a plan, the given technical indicators should be clarified, such as the scale of the value, the error of the value, the resolution, the repeatability error, the time drift, the temperature drift, the application environment, etc. 2. The selection of core data ...

Resistance strain gauge is a kind of element used to measure strain, which is made of 0.02-0.05mm diameter constantan wire or nickel-chromium wire wound into a grid (or corroded into a grid with a very thin metal foil) in two layers of insulating sheet (substrate), and is connected with tinned copper wire and strain gauge wire as a strain.

Turck's BCT sensors feature teachable pushbuttons and LEDs at the rear of the body for maximum user convenience. Turck is presenting a new generation of capacitive sensors from the BCT series, which are primarily used for level detection. Use...

To include a device with a new software channel, Turck is expanding the Q300 series. In addition to the CODESYS-based read/write heads developed for PLC integration, system integrators can now also use Linux-based versions. ...

First, there is no change in the output of the transmitter when the temperature of the measured medium rises or decreases. This situation is mostly a problem with the sealing of the temperature sensor, which may be because the temperature sensor is not sealed well, or it may be that the sensor is accidentally welded into a small hole during welding.

Turck's proximity sensors, also known as contactless proximity switches, are ideal electronic switching sensors. When the metal detector is close to the sensing area of the switch, the switch can be contactless, pressure-free, non-sparking, and issue electrical commands, accurately reflecting the position and stroke of the moving mechanism, even if it is used for a ...

A linear displacement sensor is an electrical signal device that converts linear mechanical displacement into a linear or arbitrary function relationship through a potentiometer element. The potentiometer planned to complete the measurement of displacement intent must require a confirmation relationship between the change in displacement and the change in resistance. So so...

Turck presents the PT1100/2100 pressure sensors for mobile equipment such as mining, forestry, agriculture and construction machinery In order to meet the application requirements of mobile devices, Turck has further expanded its product group of pressure sensors ...

A tensile pressure sensor is a device that converts a physical signal into a measurable electrical signal output. Precautions for Nala pressure sensors: 1. The appearance of the equipment should be as flat as possible, without oil or film, and the equipment should have sufficient strength and rigidity, ...

1. The application of displacement sensor in the shield machine In the tunnel construction equipment, the structural characteristics and supporting facilities of different forms of shield machines are also different. In some messy shield machines, the functions of the shield machine are systematic and diversified. Including: mechanical, hydraulic, ...

1. Displacement sensor, also known as linear sensor, is a linear device belonging to metal induction, and the function of the sensor is to convert various measured physical quantities into electricity. In the production process, the measurement of displacement is generally divided into two types: measurement standard and mechanical displacement. Transformed by the measured variable ...

The so-called inclination angle is a relative orientation with reference to the horizontal line and the vertical axis. Changes in orientation can be monitored quickly and precisely by means of inclination sensors. The acceleration of gravity is a parameter measured by the sensor. This measurement principle is equivalent to using a plumb line to produce a change of direction in a gravitational field. Turck inclination ...