TURCK teaches capacitive sensors

The infrared sensor is a very important part of the infrared detection system, but it is very delicate, and if you are not careful in use, it may cause damage to the infrared sensor. Therefore, the following points should be paid attention to in the application of infrared sensors: 1. Must ...

Turck's Turck pressure sensors have outstanding machining and heat treatment capabilities and high compressive strength. Affected by the characteristics of small influence of temperature, the correct selection of elastic sensitive components and strain gauge bridges is an important way to improve the strain gauge sensor: 1. The measurement scale has high optical accuracy, and the force measurement ...

Torque sensors are generally used to measure the magnitude and direction of the driver's torque acting on the steering wheel and convert it into an electrical signal. The power steering ECU receives this signal and the vehicle speed signal, confirms the direction and size of the auxiliary power, and then reduces the steering torque when traveling at low speeds.

1. Program selection Before selecting a plan, the given technical indicators should be clarified, such as the scale of the value, the error of the value, the resolution, the repeatability error, the time drift, the temperature drift, the application environment, etc. 2. The selection of core data ...

1. Determination mechanism The commonly used torsional strain gauge is attached to the ductile shaft to be measured with strain adhesive and forms a strain bridge, which supplies power to the strain bridge. The electrical signal of torsion on the elastic shaft is immediately determined. After the strain signal is enlarged, it is changed to the positive and negative parts of the torsional strain after the voltage/frequency change.

Turck's encoder range has been strategically expanded even further. We can now consider our customers to offer newer and faster encoders with IO-Link interfaces (COM 3, 230.4 kbps). As part of Turck's product range ...

MR-C series Relays from two to four electric shocks At the same time, it has a complete series of special industrial relays and power relays Unique coil voltage levels - 220V DC and 400V AC The C5 series has become an important part of the MR-C series, and the electric shock capacitance can be ...

When there is a problem with the sensor, do you know what went wrong and what is the cause of the problem? There are four main types of sensor problems, namely complete failure problems, fixed error problems, drift error problems, and accuracy degradation problems. ...

Torque sensors are able to convert the physical change of torque into accurate electrical signals, which are mainly used in the power range, and have the characteristics of long service life, high accuracy and strong reliability. Torque sensors are not common in our daily lives, but their use is very important. Currently, the twist ...

1. Durability The reason why the switch has such a long life is that the switch acts as elastic in the straight direction from the elastic membrane. Despite the millions of activities after the elastic membrane, due to the small creep rate, only 0.1 - 0.3m ...

1. Accuracy 2. Environmental conditions – there are usually limits on temperature/humidity 3. Range – the measurement limit of the sensor 4. Calibration – Essential for most measuring equipment, as readings change over time ...

The angular displacement sensor is a model of displacement sensor that uses a non-touch patent plan to effectively improve long-term reliability compared to other traditional angular displacement gauges such as synchronous analyzers and potentiometers. Its unique planning does not require the use of slip rings, blades, touch cursors...

1. The proximity sensor cannot confirm how far the distance between the detected objects is. 2. The switch is installed within the detection interval range, and the signal is sometimes absent (sometimes detectable, sometimes undetectable) in practice. 3. Practice the detection interval and the ...

1) There is a difference between the two-wire system and the three-wire system of the proximity switch, and the three-wire system is divided into NPN type and PNP type, and their wiring is different 2) The wiring of the two-wire proximity switch is relatively simple, and the proximity switch can be connected to the power supply after being connected to the load in series. 3) Three-wire proximity switch ...

The bridge viewing method is to use the sensor to perceive the physical quantity of the measured object, convert the perception signal into a telecommunication signal output according to the fixed law, collect the electrical signal of the sensor with the active collection equipment, transmit the data to the remote server through the wireless data transmission module, complete the information processing, storage...

Photoelectric switch is the abbreviation of photoelectric proximity switch, which uses the detection object to block or reflect the beam, and the circuit is turned on by the synchronous loop, and then the presence or absence of the object is detected. Objects are not limited to metal, and all objects that reflect (or block light) can be detected. Light...

The so-called inclination angle is a relative orientation with reference to the horizontal line and the vertical axis. Changes in orientation can be monitored quickly and precisely by means of inclination sensors. The acceleration of gravity is a parameter measured by the sensor. This measurement principle is equivalent to using a plumb line to produce a change of direction in a gravitational field. Turck inclination ...

1. The scale of the sensor: (1) In normal use (static test or quasi-static test, the frequency of use is not high), the scale of the sensor should be selected to consider the force value of the measurement, but also to consider the weight of the auxiliary thing (test fixture) and so on.

To include a device with a new software channel, Turck is expanding the Q300 series. In addition to the CODESYS-based read/write heads developed for PLC integration, system integrators can now also use Linux-based versions. ...

In what ways does the signal fail to manifest Allah? Why is the signal unstable? Generally, the output signal is unstable due to transient temperature changes that cause the bias voltage to fluctuate and fluctuate. How to deal with it? A sensor with a stable bias voltage is used for processing. ...