Turck RFID expands the Q300 series with a Linux version

Create Date: 2024-8-30 12:03:23|Source: TURCK/TURCK

To include a device with a new software channel, Turck is expanding the Q300 series. In addition to the CODESYS-based read/write heads developed for PLC integration, system integrators can now also use Linux-based versions.

Turck RFID expands the Q300 series with a Linux version

Turck RFID expands the Q300 series with a Linux version

System integrators of RFID solutions develop customer-specific software to transfer RFID data from physical measurements to higher-level systems. The use of PLCs via traditional fieldbus protocol connections is not common in this area.

In logistics, integrators need an open channel to develop and operate their respective software solutions. Use cases are important in this area: RFID data must be filtered and then transmitted to an ERP or other system, where it can be used for a variety of missions:

■After delivery, it can be automatically detected and registered into storage

■Items can be detected again after they have been shipped, and it is possible to automatically verify that nothing was lost during the delivery process

As part of the logistics process, these solutions for identifying goods and items typically require the control of multiple antennas at a single read point. One standard application is to inspect goods through the door. These applications allow multiple passive antennas to use only one electronic system (multiplexing) and then enable fast, high-performance and reliable detection of items passing through the reading station. The reading area is extended with multiple antennas, allowing multiple tags to be read from multiple directions.

Key features and benefits

According to Linux, the middleware function can be integrated on TN-UHF-Q300-CHN-LNX. As a result, the Q300 can completely replace the functions of expensive industrial computers in applications, such as data filtering and processing.

The degree of freedom in terms of communication protocols and software programming means that the application can be precisely adapted to the customer's needs and provides the customer with a high degree of flexibility in data processing.

In addition, the data can be transferred to a higher-level MES or ERP system. Our in-house system integrator, Turck Vilant Systems, also runs its own Turck Vilant engine with the Linux version of TN-UHF-Q300. As a result, the Q300 reader can replace the previously used UHF read/write head with integrated Linux channels.

More on that

	Two ways of movement of displacement sensors – Turck There are two ways to move a displacement sensor, but which two methods are there? We're going to talk about that today. Displacement is a quantity related to the movement of the position of an object in the process of motion, according to the different motion methods, the displacement sensor can be divided into linear displacement sensor and angular displacement transmission ...
	Identification defined by Turck's inductive sensor number For example, the number of the type: Ni12U-M18M-VP4X-H1141 is divided into 6 parts Part I: Ni12U Letter N: The device method of the sensor is (non-flush device method) Electricity...
	Turck's PS+ series of pressure sensors Turck has been selling fluid sensors for more than 20 years, and the PS+ series of pressure sensors is a serious expansion of its existing product range. Designed for fast and straightforward commissioning, the device features sensitive device options, intelligent system integration facilities, and a ...
	Influencing the stability of load cells – Turck The planning of the elastic element, shell, diaphragm and upper pressure head and lower pressure pad of the load cell is necessary to ensure that the function does not shake in the structure after loading, or the function shakes very little. ...
	Thermocouple temperature and RTD temperature sensors – Turck In daily operations, we often encounter the use of temperature sensors, thermocouples and RTDs are used as temperature sensing components, but their principles and functions are different. What are the differences? ...
	The reason why the temperature sensor could not be calibrated – Turck Temperature is a commonly used measurement parameter. Temperature sensors are used in instruments that measure temperature. To ensure precision and accuracy, all temperature sensors must be calibrated according to known specifications. However, there will be a variety of problems in the daily calibration process.
	Turck's flow sensing with text display The FS101 sensor with alphanumeric display continues the operation and commissioning of Turck's FS+ fluid sensor series, which Turck has added to its FS+ fluid sensor series. The new FS+ sensor has the same look and feel, with the same look and feel as all its ...
	Introduction to the types of proximity switches – Turck 1. Eddy current proximity switch This type of switch is sometimes called an inductive proximity switch. It is the use of conductive objects to produce eddy currents inside the object when approaching the proximity switch that can generate an electromagnetic field. This eddy current reacts to the proximity switch and causes the internal circuit parameters of the switch to change, ...
	Turck sensor technology 1. Capacitive pressure sensors are usually loved by many OEMs to test the capacitance changes between the two appearances, so that the sensors can sense extremely low pressure and vacuum levels. In our typical sensor configuration, the tight shell consists of two golden appearances, metal ...
	Turck's method for commissioning pressure sensors Turck pressure sensor debugging method example: the 0.08-2MPa planning controller is selected, the pressure is requested to drop to 0.8MPa (down switching value) to announce the contact signal, the operation process is as follows: screw the product into the threaded mouth of the hydraulic pressure calibration table, and ...
	The structure of the proximity sensor switch 1. Durability The reason why the switch has such a long life is that the switch acts as elastic in the straight direction from the elastic membrane. Despite the millions of activities after the elastic membrane, due to the small creep rate, only 0.1 - 0.3m ...
	Turck's IM34 temperature changeover combines the advantages of a single device Temperature measurement is a common application, even in hazardous areas. IM34 temperature conversion equipment is a high-end diagnostic device, with comprehensive functions, convenient use and easy operation. The IM34 is capable of bringing 2, ...
	Introduction to the characteristics of Turck's current transformers The current transformer plays an important role in the electrical, so the requirements for some characteristics of the current transformer are also relatively high, in order to get used to the sensitivity and speed of electrical action. First, according to the equivalent circuit diagram of the current transformer ...
	AC and DC contactor interchangeability 1. The AC contactor can replace the DC contactor in an emergency, and the suction time can not exceed 2 hours (because the heat dissipation of the AC coil is worse than the DC coil, which is determined by their different structures).
	The principle of inclination sensor technology – Turck The so-called inclination angle is a relative orientation with reference to the horizontal line and the vertical axis. Changes in orientation can be monitored quickly and precisely by means of inclination sensors. The acceleration of gravity is a parameter measured by the sensor. This measurement principle is equivalent to using a plumb line to produce a change of direction in a gravitational field. Turck inclination ...
	Analysis of the humidity sensor product – Turck In the domestic market, there are many domestic and foreign humidity sensor products, capacitive moisture-sensitive components are more common, and the varieties of moisture sensing materials are mainly polymers, lithium chloride and metal oxides. The advantages of capacitive moisture sensitive elements are ...
	The main role of torque sensors is Turck Torque sensors are able to convert the physical change of torque into accurate electrical signals, which are mainly used in the power range, and have the characteristics of long service life, high accuracy and strong reliability. Torque sensors are not common in our daily lives, but their use is very important. Currently, the twist ...
	Turck sensor classification and its characteristics Ultrasonic sensors In order to ensure the best material flow, the in-plant logistics system often uses conveying equipment, and if you want to run the conveying equipment at high speed, it is necessary to obtain the location information of the container. Turck's RU50 ultrasonic sensor is the ideal solution for inspecting containers in intralogistics systems.
	How to use linear displacement sensors – Turck A linear displacement sensor is an electrical signal device that converts the linear mechanical displacement into a linear or arbitrary function relationship through the potentiometer element. In order to achieve the intention of measuring displacement, it is necessary to have a confirmation relationship between the change in displacement and the change in resistance. Usually...
	Comparison of old and new Turck modules 　　Old model New model BL67-16DO-0.1A-P MC 0116 0101 　　BL 67-1RS232 MC 2501 0000 　　BL 67-1RS485/422 ...