1. The film surface of the industrial touch screen is the touch surface, that is, the front of the product; The glass side is non-touch, i.e. the back of the product.
2. The industrial touch screen part is a glass product, and the corners of the glass are sharp, please wear gloves and finger sleeves when assembling.
3. The industrial touch screen part is a fragile glass product, and do not exert a strong impact on the touch screen during assembly.
4. Avoid taking the lead directly and picking up the LCD screen, and avoid pulling on the lead line.
5. The reinforcing plate of the lead line cannot be bent.
6. No half folding is allowed in any part of the lead line.
7. When assembling the lead-out wire, it must be inserted horizontally, and cannot be folded and inserted in half at the root of the reinforcing plate.
8. When picking and placing products, it is necessary to operate a single piece and handle it gently to avoid the products colliding with each other and scratching the surface of the product.
9. When cleaning the surface of the product, please wipe it with a soft cloth (deer skin) dipped in petroleum ether.
10. Do not use corrosive organic solvents to wipe the surface of the touch screen film. Such as industrial alcohol, etc.
11. Do not stack touch screens, use tray disks.
12. When assembling and designing the frame, please pay attention to the following:
a. The pillars that hold the bezel of the touchscreen in place must be outside the viewable area of the touchscreen.
b. The edge of the frame must be outside the operation area of the touch screen, and the edge of the frame must not have pressure action from the visual area to the operation area.
c. It is recommended that the material of the fixed touch screen is a plastic material, and the front part of the touch screen is padded with a soft material.
d. Do not stick corrosive glue to the surface of the touch screen.
The above is the precautions for the use of industrial touch screens, and we must use them carefully when using them to avoid damaging the product. Reducing the loss of the product is also a kind of maintenance and maintenance of the product, so that the life of the product can be extended.
|
More on that
|
How to set up the Ethernet port of the computer and MT8101iE?
The Ethernet IP address and port number are set on the touch screen, such as 192.168.10.11, port number 102, and other parameters are set by default, that is, after setting the system parameters, you can edit the screen.
|
|
Weiluntong touch screen MT (iP) series (compact type)
1、MT6102iQ
10.1" TFT display 1024*600 dots, brightness 350, contrast ratio 500:1, 16.7M color,
128MB memory, DC10.5-28VDC power supply, four-wire resistive type,
USB Host USB2.0/Serial Interface (Con.A COM2 RS-485 2W/...
|
|
How to set the touch screen not to standby?
1. Enter the system settings interface of the Weilun touch screen, and select the "Power Management" option in the "System Settings".
2. In "Power Management", you can set how long the touch screen will automatically enter the "standby" state without operation, and you can also set how long it will enter the "...
|
|
Steps on how to connect Omron NX to Willuntong touch screen Ethernet
1: For new projects, choose Weiluntong touch screen models;
2. Select the device in the system parameter settings and click Add Device/Server;
3. Go to the new device/server, select OMRON Corporation, and confirm;
Four: Enter OMRON Corporation, select ...
|
|
Velun Tong touch screen programming software
EasyBuilder Pro is a very easy to use and powerful Veruntong touch screen programming software, the software provides a humanized human-computer interaction interface, which can meet the needs of different programmers, suitable for Veruntong eMT, cMT, iE, MT (iP) and TK (iP) models, the software provides ...
|
|
Weiluntong touch screen - the reason for the black screen of the industrial touch screen
1. The inverter burns out
2. The fuse will be burned when the power is on, and the motherboard will fail;
3. The liquid crystal is faulty, and the motherboard is also burned;
4. The power supply of the motherboard is partially damaged;
5. The motherboard is faulty, and there is a large current burnout;
6. The backlight does not light up, and the motherboard inverter is faulty;
7. Reverse ...
|
|
The charm of Weiluntong blooms at the 2017 China International Industry Fair
On November 7, 2017, the 2017 China International Industry Fair (hereinafter referred to as the Industrial Expo) opened at the National Exhibition and Convention Center in Shanghai. As Asia's largest and most branded top event in the field of industrial automation, this event gathered the world's famous automation equipment manufacturing enterprises, leading ...
|
|
How does the Weilun touch screen communicate with Mitsubishi PLC
1. Open the Weilun software;
2. Click "Edit" - system parameters;
3. Enter "Mitsubishi model" in the pop-up dialog box name;
4. Check the "PLC" below to select the PLC type;
5. Communication can be realized by connecting the machine with a communication line.
...
|
|
Steps to restore the factory settings of the Verun Tong touch screen
1. The screen is powered off, and the first DIP switch behind is dialed to the ON position;
2. Power back on, a white crosshairs will appear on the screen, click the middle of the crosshairs vertically, after the point (the time can not be too short), the crosshairs will automatically jump to the next position, crosshairs ...
|
|
Precautions for the use of the USB cable of the touch screen
USB cable specification: HI-SPEED USB Revision 2.0 SHIELDED 24AWG
1. The USB port of the computer must support standard USB 2.0 or USB 3.0.
2. The USB cable needs to be double-layer isolated: aluminum foil and copper mesh isolation.
3. The length of the USB cable is not ...
|
|
How the Veriton touch screen simulates access to dual slaves via a virtual serial port
Virtual serial port configuration process:
1. Open the virtual serial port configuration software and create two pairs of serial ports;
2. The circle is the physical serial port in the computer, and the virtual serial port in the box;
3. Two groups have been added, and friends who want to add port tests can do so in the window on the right.
|
|
Weiluntong - analysis and treatment of the cause of touch screen failure
Check whether the connection interface is loose, and then check whether Serial Port and Interrupt Number conflict. If there is a conflict, adjust the resources to avoid the conflict. Then check the surface of the touch screen for cracks. If there is a crack, replace it in time. It is also necessary to check the touch screen table ...
|
|
How to deal with the slow response of the touch screen?
1. Check if the touch screen is clean: If there are stains or grease on the surface of the touch screen, it will cause the touch to be insensitive or slow to respond. The touchscreen surface can be cleaned using a specialized touchscreen cleaner or a clean cloth.
2. Check if the touch screen is damaged: If the touch screen surface is damaged, ...
|
|
Weiluntong touch screen - daily maintenance of touch screen
When using touch screens, due to technical limitations and poor environmental adaptability, especially surface acoustic wave screens. The screen cannot be used normally due to water droplets, dust, etc., so touching the screen requires regular maintenance just like ordinary machines. And since the touch screen is much ...
|
|
How to adjust the time of the touch screen?
1. First of all, open the Weilun touch screen to modify the software, and be sure to choose the software corresponding to the type of touch screen;
2. Modify the required touch screen screen;
3. Then open the "System Settings" button under the "Common" menu in the upper left corner;
4. Set the pop-up window in the system ...
|
|
How to choose VIRONT CMT password login?
Right-double-click the parameter settings button.
Specific steps:
1. Create a new screen, and then make a keyboard, and the OK button is [Screen Jump Control]
2. Double-click the [Parameter Setting] button and select [Properties].
3. Click [Security], and then ...
|
|
Common faults and maintenance of Weilun touch screen
(1) The indicator light of the boot host is normal, but the monitor shows no signal input (black screen);
(2) Press the on/off button, but the host has no response (the indicator light is not on, and the host cannot be heard to start);
(3) The computer is restarted repeatedly, accompanied by crashes and blurred screens;
(4) The screen is broken ...
|
|
The maintenance method of the touch screen of Weiluntong
Weiluntong touch screen, also known as "touch screen", "touch panel", is a kind of inductive liquid crystal display device that can receive input signals such as contacts, when touching the graphic buttons on the screen, the haptic feedback system on the screen can drive various connection devices according to the pre-programmed program, which can be ...
|
|
Weiluntong touch screen - common faults and solutions of infrared all-in-one machine
Why can't the infrared touch all-in-one machine be calibrated?
1. It is possible that the touch screen control card receives the operation signal before the host starts to load the touch screen driver, please power off and restart the computer and recalibrate.
2. It is possible that the sound wave screen is used for a period of time, ...
|
|
The Weiluntong touch screen alarm display does not have predefined attributes, how to set
1. Locate the relevant property. In the property settings of the touch screen, find the properties that need to be set, such as touch screen input, output, communication and other related attributes.
2. Set the properties. Set the appropriate property values as needed. If some properties don't have predefined options, ...
|
|
Contact
working hours
