Component conversion is a process in which an analog signal (load converter output voltage) input from outside the programmable controller is converted into a digital output value and a total component output value, and then stored in buffer memory. After the conversion process, the conversion completed (XE) will be changed to ON, and the transformation completion symbol (Un\G113) will be changed to the conversion completed (1H) state.
There are four ways to deal with the component conversion as follows.
. Sampling processing
. The number of times is evenly processed
. Move evenly processed
. Use · evenly with even movements
1. Sampling processing
The measured digital output values as well as the total component output values are stored in the buffer memory.
The period in which the component measurement is updated (conversion speed) is 10 ms.
Set the uniform processing method setting (Un\G1) to sampling processing (0H).
2. The number of times is evenly processed
The total value of the maximum and minimum values is evenly removed and stored in the buffer memory after sampling the number of times set.
Set the Uniform Treatment Method setting (Un\G1) to the number of times of uniform processing (2H).
The uniform setting (Un\G2) can be set from 4 times to 255 times.
The processing time is shown below.
. Processing time = (number of settings x 10) ms
3. Move evenly
The digital output value of the number of settings and the total component output value obtained for each conversion speed (10 ms) are evenly distributed and stored in the buffer memory.
Since each sample is moved evenly, it is possible to obtain the latest digital output value as well as the total component output value.
Set the Uniform Treatment Method setting (Un\G1) to Move Uniform Treatment (3H).
The setting range of the Moving Evenness setting (Un\G3) is 2 times - 255 times.
4. The number of times is even, and the movement is evenly · and used together
The value of the uniform processing of the number of times and the result of the uniform processing of the movement are stored in the buffer memory.
Set the uniform processing method setting (Un\G1) to the number of times evenly and move evenly · and use it together (5H).
|
More on that
|
Mitsubishi PLC module model
FX3S-10MR/ES AC power supply · DC input type input: 6 points DC24V drain/source type output: 4 points relay
FX3S-10MT/ES AC power supply · DC input input: 6 points DC24V drain/source output: 4 points transistor drain type
FX3S-10MT/E ...
|
|
Mitsubishi PLC Explanation Notes on the Final Statement
If the language is a programming language without any explanation, it will be very difficult for the engineer to understand the program again, and some clarification can bring twice the result to the work. There are three types of explanations: notes, statements, and notes. Note: Explain a certain ...
|
|
Mitsubishi Electric appeared at the 2021 China Smart Expo
From August 23 to 25, 2021, the 2021 China International Intelligent Industry Expo (hereinafter referred to as the Smart Expo) was held in Chongqing International Expo Center. Mitsubishi Electric (China) ...
|
|
Mitsubishi FR-A700 series inverter problem
1. Consultation question: FR-A700 series Mitsubishi inverter, the suffix is ending in -CA1, what kind of inverter?
Solution: The suffix -CA1 is a special model with take-up control.
2. Consultation question: FR-A ...
|
|
The matching relationship between the inverter and the motor - Mitsubishi
It has become an irreversible trend to drive the motor through the inverter, and in the actual application process, because the matching relationship between the inverter and the motor is not very reasonable, it often leads to some problems. When selecting an inverter, you should fully understand the load characteristics of the equipment driven by the inverter. Ms. Ginseng ...
|
|
Introduction to the capacitive role of Mitsubishi inverter
Capacitor is a kind of energy storage element, with the characteristics of "straight through AC, low frequency through high frequency", people in order to know and identify the capacitor in different circuits, according to its effect in the line and give it many titles, the following introduces the meaning of some commonly used titles.
...
|
|
Mitsubishi inverter encountered problems and solutions
1. If you want to use the inverter to drive the motor with a capacitor to improve the power factor, but the motor does not move, please explain the reason.
The current flowing into the inverter is used to improve the power factor, but the capacitor cannot be started because its charging current causes the inverter overcurrent (OCT), as a countermeasure, ...
|
|
Anti-interference measures for PLCs and touch screens - Mitsubishi PLC
1. Select the power supply with excellent performance and press the disturbance introduced by the power grid
The power supply of the PLC controller is powered by a non-power line, and is powered by a special line directly led by the main bus of the low-voltage distribution room. Isolation transformer should be selected, the transformer capacity should be 1.2-1.5 times larger than the actual need, and can be used in isolation...
|
|
Mitsubishi catalogue of some small PLC models and commonly used touch screens
Commonly used touch screen model description
Economical touch screen GS2107-WTBD 7 inch widescreen, 800*480, 65535 colors, USB/232/422/Ethernet, DC
Pass through...
|
|
Features of the MELSEC iQ-R series of programmable controllers
1. Routine control is consistent with safety control
In the MELSEC-QS series, it is necessary to prepare a system for conventional control and a system for safety control. With the MELSEC iQ-R series of safe programmable controllers, it is possible to combine conventional and safe control into a single system.
Quiet...
|
|
Mitsubishi PLC product line analysis
FX1S Series:
Mitsubishi PLC is an integrated small unit type PLC. And it has intact functions and communication functions and other scalability. If you consider the space and cost of the installation, it is an ideal choice.
FX1N Series:
It is a popular PL with strong functions launched by Mitsubishi Electric ...
|
|
The interaction between the PLC and the touch screen is consistent - Mitsubishi
When the contact screen is connected with the PLC, in fact, the memory of the PLC is used, (the contact screen also has a small amount of memory, which is only used to store system data, that is, the screen, controls, etc.), the contact screen and the PLC communication is generally a master/slave relationship, that is, the contact screen reads data from the PLC, and after making a judgment, it is displayed in the display ...
|
|
The wiring steps of the input and output circuits of the Mitsubishi PLC
The wiring diagram steps of the input and output circuit of Mitsubishi PLC, there are generally three types in the wiring diagram of the input and output of the PLC, one is DC 12-24V input, and there is output, so what about the external input?
（1 ...
|
|
Z series and A200 series inverter fault solving
Low-power Z024 series inverter, our common problems include OC, ERR, no appearance, etc. There are two possible causes of OC.
(1) Aging of the drive circuit
Because the use of a long period of time will inevitably lead to the aging of components, which will cause the driving waveform to occur.
|
|
The origin of Mitsubishi servo motion control is returned
1. The so-called positioning is to let the servo motor go to a confirmed position.
2. This direction can be so incremental, or so ***. For example, we are now on the road, and we have to go forward 10 meters, which is equivalent to adding 10 meters to our bearing.
|
|
What is the difference between the Mitsubishi PLC FX3U and FX5U
1. The speed of the system bus is different. Although the FX5U series is small but precise, compared with the previous product FX3U, the system bus speed is greatly increased by 150 times, and the maximum expansion module can be expanded by 16 intelligent expansion modules, built-in 2-in and 1-out analog functions, built-in Ethernet interface and 4-axis 200kHz high-speed positioning function.
...
|
|
Built-in time adjustment in Mitsubishi PLC
How do I adjust the built-in moments in my Mitsubishi PLC? In the case of Mitsubishi PLC, sometimes technical engineers forget to adjust the PLC well, but they also need to pay attention to some key points and introduce how to adjust the built-in moments in Mitsubishi PLC.
...
|
|
Low-voltage electrical faults and maintenance methods - Mitsubishi
In the process of operation, low-voltage electrical appliances will present problems due to improper use or long-term operation of aging components, and there are many kinds of problems, and the common problems are analyzed and dealt with.
1. Contact problems and repairs
The contact is the primary component of the low-voltage switching coupon, ...
|
|
Mitsubishi plays an important role in the paper industry
From raw material pulp to papermaking, and then through packaging and logistics, the paper towel finally completes the "transformation" to meet customers. The impression of packaging and quality, coupled with the comprehensive effect of multiple specifications, traceability, high standards, authoritative certification and other factors, will finally win the hearts of customers, and then establish a trustworthy ...
|
|
Mitsubishi inverter setting parameter adjustment method
Mitsubishi inverter has many setting parameters, each parameter has a certain selection scale, and the inverter can not work normally due to improper setting of a single parameter in the application. Let's take a look at the Mitsubishi inverter parameter setting operation.
...
|
|
Contact
working hours
