At 15:05 on January 12, 2022, Datang Anhui Luoneng Power Generation Co., Ltd. (hereinafter referred to as Datang Luohe) successfully completed the full-load trial operation of Unit 5 after comprehensive upgrading, marking the smooth operation of Unit 5 of Datang Luohe Power Plant after the transformation. Hollysys HOLLiAS MACS IC fully autonomous controllable DCS system has realized the first set of DCS+DEH integrated operation of ultra-supercritical thermal power units above 600MW, providing a model project for the localization transformation of large-scale thermal power units and setting an industry benchmark.
Promote the process of localization with innovative technology
Datang Luohe Unit 5 was put into operation in 2008 for power generation, using foreign DCS and DEH systems. This time, Hollysys HOLLiAS MACS IC completely autonomous and controllable DCS system was used to transform the No. 5 DCS system (including DEH and ETS) and the DCS public network of 5 and 6 units.
The total number of points of the project exceeds 30,000 points, and a total of 33 pairs of controllers are configured to complete the functions of DAS, MCS, SCS, FSSS, ECS, ETS, DEH and other functions of the unit. The project completed the factory acceptance on August 30, 2021; The on-site restoration was completed on September 25; On October 25, the public system was put into use; On November 26, it passed the on-site performance and function test of the expert group of the Power Generation Special Committee of the Chinese Society of Automation; The hydrostatic test was completed on December 8; Blowpipe completed on December 20; On January 4, the steam turbine impulse fixed speed was 3000 rpm; On January 8, the unit was connected to the grid; Finally, the full-load trial operation was completed on January 12.
Autonomous and controllable, safe and trustworthy HOLLiAS MACS IC DCS EFFICACY
Hollysys HOLLiAS MACS IC is an integrated management and control platform for industrial sites carrying DCS, SIS/CCS, PLC, SCADA, industrial software and other system functions, using ultra-large-scale system design, supporting up to 128 domain integration, a single domain up to 1.2 million points, 64 control stations, a single control station up to 360 IO configurations, and a system response time of < 30mS, which fully meets the high reliability and high safety requirements of ultra-large refining and chemical projects.
The system is the latest achievement of the deep integration of Hollysys' independent research and development of localized control technology and information security technology, and has the three characteristics of cross-platform, independent and controllable, safe and credible.
(1) The system software is all source-level cross-platform, and a set of software source code is adapted to the compilation and construction of a variety of operating systems, realizing cross-platform/cross-language data exchange, convenient deployment to different operating system platforms, and easy to upgrade and transform the existing system.
(2) Each system component adopts domestically produced components, the system software is independently developed based on the domestic operating system, and the platform adopts OT/IT deep integration technology to realize the integration of management and control. It can be said that the software and hardware of the system platform are independently controllable and produced in China.
(3) The main control unit of the system has a built-in independent trusted security protection system, which improves the technical level of trusted computing in the field of industrial embedded control, and is the first endogenous security DCS control system, and has a number of built-in security audit and data encryption algorithms to meet the requirements of the third level of information security protection.
The quality and efficiency have been improved, and it has been recognized by users
Since the establishment of the project, Hollysys has dispatched elite soldiers from various departments to form a project team. After it was put into operation, Hollysys system operated stably, safely and reliably, and was highly recognized by users. Datang Luohe Power Plant and the general contractor, East China Electric Power Design Institute, paid special tribute to Hollysys' high-quality product technology, and highly praised the project team's rigorous and responsible work attitude and excellent technical level. The successful application of Hollysys HOLLiAS MACS IC completely autonomous controllable DCS system in ultra-supercritical thermal power units above 600MW is the perfect coupling of chips, databases, operating systems, industrial software, automation technology and large-scale thermal power industry technology in the independent industrial field, which gets rid of the dependence of the core technology of domestic industrial control system on foreign countries, and solves the problems of supply chain security, information security, functional safety, and intrinsic safety in the traditional industrial control security application field. It has realized the upgrading and transformation of large-scale industrial control systems, improved the technical level of DCS control systems in the field of power generation in China, and is of great significance to ensure national energy security.
Hollysys will take this breakthrough as an important milestone in promoting the localization process, make unremitting innovation, boldly explore, empower the industry with independent, controllable, safe and credible products, technologies and solutions, help users achieve a significant improvement in engineering efficiency with an efficient and easy-to-use integrated platform, ensure the smooth operation of users' system equipment with digital services, and continue to escort the national industrial security.
|
More on that
|
Hollysys PLC - maintenance steps of PLC control cabinet
1. Data backup
When carrying out maintenance, we must cut off the power, data backup between power outages is an important link, for the data that needs to be archived for a long time, you can back up the historical trend data to the mobile hard disk, and then turn off the Windows-based operating system (Note...
|
|
Hollysys DCS - What is DCS distributed control system?
DCS is the English abbreviation of distributed control system (Distributed Control System), distributed control system is referred to as DCS, which can also be literally translated as "distributed control system" or "distributed computer control system". The decentralized control system is based on the microprocessor, and the control function is decentralized.
|
|
Hollysys PLC - PLC is classified according to function
According to the different functions of PLC, PLC can be divided into three categories: low-grade, mid-range and high-end.
(1) Low-grade PLC
Low-grade PLC has basic functions such as logic operation, timing, counting, shifting, self-diagnosis, monitoring, etc., and can also have a small amount of analog input/output, arithmetic operation, math...
|
|
Hollysys PLC - Introduction to the functions and application fields of PLC
1. The function of PLC
PLC is a general industrial automatic control device with microprocessor as the core, integrating computer technology, automatic control technology and communication technology, which has high reliability, small size, strong function, simple program design, flexible and universal and maintenance methods.
|
|
Common fault parts and maintenance of Hollysys PLC
1. Lack of motivation
It may sound simple, but it's good to check the simple stuff first. Thoroughly inspect all power connections and cables for damage that could cause a short circuit. Make sure your power supply is functioning properly. Use a voltmeter to check if the grounding and voltage are correct.
2. Bad ...
|
|
Hollysys PLC - Introduction to the composition of PLC control cabinet
1. Open empty
A master air switch that is the power control for the entire cabinet.
2. Power supply
A 24VDC switching power supply.
3、PLC
This should be chosen according to the needs of the project. If the scale of the project is small, the integrated PLC can be used directly; If the item ...
|
|
Hollysys will make a blockbuster appearance at the first Shenzhen Nuclear Expo in 2022
From November 15th to 17th, the 2022 China Nuclear Energy High-Quality Development Conference and Shenzhen International Nuclear Energy Industry Innovation Expo (hereinafter referred to as the "2022 Shenzhen Nuclear Expo") will be grandly reopened at the Shenzhen World Convention and Exhibition Center.
The theme of this year's Nuclear Expo is "Nuclear Gathering in the Bay Area, Activating the World".
|
|
Hollysys PLC - What are the selection methods of PLC?
1. Budget for input and output (I/O) points
When budgeting I/O points, the appropriate margin should be considered, usually based on the calculated number of input and output points, and then add 10%-20% of the expandable, and after the margin, it will be used as the budget data of input and output points. When ordering in practice, it is also necessary to rely on the manufacturer's ...
|
|
Hollys PLC - when the power supply is stable, what will cause the PLC to automatically restart?
1. The connection line is loose and the contact is poor
When the run indicator of the PLC turns red, the position of the plug changes to green with a manual move, indicating that the plug is loose, and it is best to replace the new connecting wire, and the plug is frequently plugged and unplugged, which will also lead to poor contact.
2. Strong electrical interference (external)
|
|
Hollysys was invited to participate in the 2023 China Petroleum and Chemical Industry Digital Transformation and Intelligent Development Conference and delivered a keynote speech
On March 15, the 2023 China Petroleum and Chemical Industry Digital Transformation and Intelligent Development Conference was held in Tai'an, Shandong. The conference aims to strengthen the construction of "intelligent oil and gas fields, intelligent petrochemicals, intelligent chemicals and intelligent oil and gas pipeline networks", and lead China's petroleum and chemical industry to achieve intelligent transformation.
|
|
Hollysys PLC - PLC is classified by function
According to the different functions of PLC, PLC can be divided into three categories: low-grade, mid-range and high-end.
(1) Low-grade PLC
Low-grade PLC has basic functions such as logic operation, timing, counting, shifting, self-diagnosis, monitoring, etc., and can also have a small amount of analog input/output, arithmetic operation, math...
|
|
Hollysys PLC - a component of the PLC control cabinet
1. Open empty
A master air switch that is the power control for the entire cabinet.
2. Power supply
A 24VDC switching power supply.
3、PLC
This should be chosen according to the needs of the project. If the scale of the project is small, the integrated PLC can be used directly; If the item ...
|
|
The main characteristics of Hollysys LE series PLC
LE series is a new generation of high-performance small and medium-sized PLC products launched by Hollysys, which is suitable for small and medium-sized industrial equipment control and distributed long-distance monitoring applications. LE-PLC combines the compact structure of small PLC products with the abundant functional advantages of medium-sized PLC products, and can support up to 20 local IOs or long ...
|
|
and Lisi DCS - the difference between DCS control and PLC control
1. PLC programmable logic controller (programmable controller).
2. DCS system pays more attention to the field of process control. Such as chemical, smelting, pharmaceutical, etc. It mainly monitors and controls some field parameters, while PLC focuses on logic control. machining). Of course, the PLC's ...
|
|
The scientific and technological achievements of "SCADA system development and refined oil pipeline application based on independent chips and operating systems" have reached the international advanced level
On October 15, 2022, the scientific and technological achievement of "SCADA system development and refined oil pipeline application based on independent chips and operating systems" jointly completed by South China Branch of National Petroleum Pipeline Network Group Co., Ltd. and Hangzhou Hollysys Automation Co., Ltd. successfully passed the China Petroleum and Chemical Industry Co., Ltd.
|
|
Hollysys DCS - Introduction to the hardware architecture of DCS
Examining the hierarchical structure of DCS, DCS level and control management level are the two most basic links that make up DCS.
The process control stage specifically realizes the decentralized control functions such as signal input, conversion, operation and output. The controls at the process control level vary in different DCS, ...
|
|
Hollysys PLC - the basic structure of PLC and the role of each part of the detailed explanation
1. Power supply: The power supply is used to convert the alternating current into the direct current required inside the PLC, and most of the PLCs are powered by switching regulated power supply.
2. Central processing unit: The central processing unit (CPU) is the control center of the PLC, and it is also the core component of the PLC.
|
|
Hollysys OCS industrial optical bus control system was successfully applied in Sinopec project
On November 13, 2022, Zhong'an United Coal Chemical Branch came with exciting news that the 20,000 tons/year butene-1 plant produced qualified butene-1 products at 22 o'clock on the same day, and the one-time start-up was successful. The control system of the device adopts the innovative technology product "OCS Industrial Optical Bus Control ...
|
|
Troubleshooting steps of Hollysys DCS system
The steps of DCS system troubleshooting include:
(1) Check the fault caused by improper use.
Common types of operational faults include operator errors, terminal wiring faults, module installation faults, and power supply failures.
(2) Troubleshoot the improper operation of the DCS system ...
|
|
Hollysys signed a contract with Lysys for the integrated management platform project of smart tunnel of Linzhou-Changzhi Expressway in Henan
Recently, Hollysys signed a contract for the comprehensive management platform project of smart tunnel of Linzhou-Changzhi Expressway in Henan Province. Linzhou to Changzhi Expressway is a traffic artery that crosses the Grand Canyon of Taihang Mountain, through Henan and Shanxi, with a total of 7 pairs (14) tunnels.
|
|
Contact
working hours
