A common problem encountered in the use of Veriton touch screen - system parameters

1. MT200, this model can be said to be the earliest model of this brand, which is very popular in some regions and can realize automated procedures. Second, MT500, this model is the successor of the previous model, after the launch of the very good sales results. ...

1. Appearance of Weiluntong contact screen: Use special Weiluntong contact screen cleaner and soft fiber cloth to clean the appearance of Weiluntong contact screen, remove dirt and fingerprints, etc., to ensure a clean appearance. 2. Restart the device: test to restart the contact screen device of Weiluntong, sometimes restart...

The parameters of the touch screen to characterize the characteristics of the capacitor include the loss factor D value, the figure of merit Q, the series equivalent resistance ESR, etc., the essence is the same, take a parameter to know the quality of the capacitor, but take the loss factor D value reference meaning. These parameters are usually not possible with a digital bridge.

1. Copy the required OS to a USB flash drive (FAT32 format is only supported); For example, in the next test, place the OS file in the firmware folder at the root of the USB flash drive. 2. Plug the USB flash drive into the USB host port of the HMI to be updated; 3. Click the arrow in the bottom right corner of the screen ...

overview The BCD format is a binary-encoded decimal, commonly known as 8421 codes Hex is the hexadecimal system Binary is the denoting binary Elaborate: 16-bit BCD: Single-word, BCD format 32-bit BCD: Two-word, BC ...

1) Check if the hard drive is turned off in the "Display Energy Saving Settings" of Wlndows 9x. The way to do this is to right-click on the desktop, select the "Properties" command, then select the "Screen Saver" tab from the dialog box, click the "Settings" button, and set the parameter to "...

Virtual serial port configuration process: 1. Open the virtual serial port configuration software and create two pairs of serial ports; 2. The circle is the physical serial port in the computer, and the virtual serial port in the box; 3. Two groups have been added, and friends who want to add port tests can do so in the window on the right.

18. Macro calculation: The values to be calculated are read, and then the data is calculated and written to LW0. 19. According to the different selections of the project menu, two different direct windows will pop up with one button: Macro commands are triggered by a button to read the ...

1. The power cord is not properly connected This may seem obvious, but make sure the power cord is connected to the back of the touchscreen and plugged into a power outlet. If it looks like it's connected correctly, disconnect and reconnect both ends of the power cord to make sure the cable isn't loose. 2. The power cord is damaged ...

First, check whether the wiring interface is loose, and then check whether there is a conflict between the serial port and the interrupt number, if there is a conflict, the resources should be adjusted to avoid the conflict. Then check whether there are cracks on the surface of the touch screen, and replace them in time if there are cracks. It is also necessary to check the surface of the touch screen for dirt and dirt.

1. Use a red wire to connect the 7 pins of the Rs485 port of the touch screen with the A port of the DTD434MC. Use another black wire to connect pin 8 of the Rs485 port of the touchscreen with the B port of the DTD434MC. 2. The last digit (K88) in the wireless communication terminal setting switch is turned on.

1、MT6102iQ 10.1" TFT display 1024*600 dots, brightness 350, contrast ratio 500:1, 16.7M color, 128MB memory, DC10.5-28VDC power supply, four-wire resistive type, USB Host USB2.0/Serial Interface (Con.A COM2 RS-485 2W/...

(1) The indicator light of the boot host is normal, but the monitor shows no signal input (black screen); (2) Press the on/off button, but the host has no response (the indicator light is not on, and the host cannot be heard to start); (3) The computer is restarted repeatedly, accompanied by crashes and blurred screens; (4) The screen is broken ...

1. Background color: Right-click on the blank space of the window, select Properties, Pop-up Settings, and select a color in the background; Hatch: In the background, tick the fill, select the pattern color and pattern. 2. Picture/Background Image: Select Picture Element ...

Since the launch of the cMT-SVR, the innovative body and screen separation architecture has subverted the market's imagination of HMI. With the continuous cultivation of Weiluntong, this unique detached HMI has gradually gained a foothold in the market and is now widely used in the market. 　　In order to meet the needs of the new generation of industrial Internet of Things ...

1.3D Object Exhibition (dynamic display of 3D models of objects) [1] 2. Banks and other financial institutions (business inquiries and service promotion at business locations) 3. Telecommunications (business inquiry in the business hall, business promotion in the experience hall) 4. Government agencies (public information issuance)

1. High stability, not affected by time and environmental changes 2. Strong adaptability, not subject to current, voltage and static interference, suitable for some harsh environmental conditions (explosion-proof, dust-proof) 3. High light transmittance, no intermediate medium, up to 100% 4. Screen and ...

1. The screen is powered off, and the first DIP switch behind is dialed to the ON position; 2. Power on again, a white cross cursor will appear on the screen, click the middle of the cross cursor vertically, after the point (the time can not be too short), the cross cursor will automatically jump to the next position, the cross light ...

When the system setting password of Verun Tong touch screen hardware is lost, the factory settings can be restored by the system initialization method. There are four ways to enter the touch calibration of the touch screen of Veruntong, and the initialization of the operating system can only be carried out through the DIP switch. 1. DIP switch mode touch calibration ...

1. Can the human-machine interface be connected to the PLC? That's not true. Human-computer interface products are produced to solve the human-computer interaction problem of PLC, but with the development of computer technology and digital circuit technology, many industrial control equipment have serial communication capabilities, so as long as there is ...