Veruntong touch screen programming software uses RS485 and PLC to realize the online mold method on the Internet

1. Background color: Right-click on the blank space of the window, select Properties, Pop-up Settings, and select a color in the background; Hatch: In the background, tick the fill, select the pattern color and pattern. 2. Picture/Background Image: Select Picture Element ...

Due to the technical limitations and different equipment environment, the screen will not be able to be used normally due to water droplets, dust and other pollution, so the touch screen also needs regular maintenance like ordinary machines, and because the touch screen is a touch all-in-one machine with a high degree of integration of a variety of electrical equipment, so in ...

1. Surface acoustic waves are not interfering with other electronic devices. Because only the superficial surface of the screen has ultrasonic waves with a frequency of 5MHz, there will be no interference with other electronic devices. 2. The length of the serial port cable (touch screen to PC). The serial cable can theoretically reach a transmission distance of 15M, ...

Open the Veriton touch screen programming software, select [Common] in the main interface and open it In the Common drop-down menu, select System Parameters and click Open. Then select [HMI Attributes] in the pop-up system parameter setting menu and click OK. ...

The default standby time is 1 minute. The specific steps are as follows: 1. First of all, open our touch screen editing software, and be sure to select the software corresponding to the touch screen model. 2. Edit the touch screen screen we need. 3. Open the common menu in the upper left corner ...

1. The download password does not match the hardware download password. 2.USB download cable contact**. 3. USB on PC does not support USB2.0. 4. The touch screen USB interface is burned out. 5. Recently, the touch screen has been reset but the upload and download password has not been reset. ...

1. When turning on and off the power of the machine, it should be operated in strict accordance with the regulations; 2. According to the severity of the environment, set a time limit to open the machine head to clean the reflective stripes and inner surface of the touch screen; 3. At present, the mainstream industrial display program does not have a mouse cursor, because the flashing of the cursor will ...

1. Add what you need as a picture to the picture library. 2. Create animations with animation tools. 3. There is a (upper right) button in the toolbar of Weilun Tong programming software, that is, the animation button, click on the 3 tracks of the animation movement on the program drawing interface and then right-click, you can ...

1. The memory address is different. The memory address of the PW touch screen uses the local hold register, while the memory address of the RW uses the hold register index to send RWI. 2. The address range is different. The address range of the LW of the touch screen is 0 to 524287, while the address range of the RW is 0 to .

1. Plug in the U disk on the touch screen, you don't need to power off the screen, the screen supports the hot-swap function, but at this time, it is best not to communicate with external devices to reduce unnecessary impact. When the screen detects an external device, a dialog box will pop up, select the second Upload Project option ...

1. Touch failure; 2. Touch the glass plate is broken; 3. The key is damaged and the key is not effective; 4. White vertical bars, horizontal bars, and bright lines appear; 5. Half can be touched, half can not be touched; 6. Can't enter the program; 7. The touch screen cannot be calibrated.

1: For new projects, choose Weiluntong touch screen models; 2. Select the device in the system parameter settings and click Add Device/Server; 3. Go to the new device/server, select OMRON Corporation, and confirm; Four: Enter OMRON Corporation, select ...

1. After selecting the PLC first, click "Import Label". 2. Next, browse - select the variable label exported from the PLC programming software - open. 3. Click "Import" and select "Yes" in the Retention Label dialog box. 4. Finally, the verification label is executed. ...

1. If the user is using a capacitive touch screen, it is recommended that the user first install the driver required for the capacitive touch screen correctly according to the requirements of the relevant manual, and then click "Start"/"Program"/"Micro ...

Sometimes we need to monitor and change the program of PLC equipment, and when it is inconvenient to connect to PLC or there is no communication line, we can choose to achieve it through the penetration function of the touch screen. The traversal communication function consists of the following two modes: Ethernet When using [Ethernet] ...

[Fault Analysis and Processing] First, check whether the wiring interface is loose, and then check whether there is a conflict between the serial port and the interrupt number, if there is a conflict, the resources should be adjusted to avoid the conflict. Then check whether there are cracks on the surface of the touch screen, and replace them in time if there are cracks. It is also necessary to check the touch ...

1. First of all, open the created Weilun touch screen project, select Common in the menu bar and click Open. 2. Secondly, select the system parameter icon in the common drop-down menu and click to open. 3. Finally, click Change. ...

1. Software use issues 1. System parameters 1.1 What do the RS485 2W and RS485 4W in the communication port type mean? RS485 2W represents the wiring method, that is, the two-wire system, that is, there are two signal lines to be connected in addition to GND; RS485 4 ...

1. The step to troubleshoot your touchscreen system is to determine if the problem is related to the display, software, or hardware: 2. Don't confuse display issues with touchscreen issues, the two are unrelated. 3. Software issues are identified by basic hardware functional testing. If the hardware is ...

1. The screen is powered off, and the first DIP switch behind is dialed to the ON position; 2. Power back on, a white crosshairs will appear on the screen, click the middle of the crosshairs vertically, after the point (the time can not be too short), the crosshairs will automatically jump to the next position, crosshairs ...