Introduction:Xinshida/STEP inverter AS510 series adopts advanced controllable rectification technology, with LCL filter to achieve active rectification, providing constant DC power supply and energy feedback for the system, and can run one or more inverter units on the DC bus to form a four-quadrant operation of multi-drive system, which provides an ideal solution for motor control applications in various occasions.
Features:
Features
The active rectification technology is adopted to reduce the reactive power, and the power factor is close to 1
Four-quadrant operation with energy recuperation function
The DC bus is more stable
Less than 4% at full load of current harmonics
LCL filter and charging loop are standard
Excellent heat dissipation structure design
Product parameters
Applicable power: 30-450kW
Rated capacity: 38-487kVA
Rated output current (when DC is 660V): 58-737A
Rated input current (AC): 65-820A
Controllable voltage range: 600-740V
Power input
Input power supply: 380-460 (±15%), three-phase power supply
Input frequency: 45-65Hz
Instantaneous current drop: when the three-phase AC380-460V power supply is < AC300V, the input voltage is AC300V, and the undervoltage protection is protected after 15ms
Control characteristics
Control mode: vector control
Input power factor: 0.95 or more (at rated current)
Harmonics: less than 4% (at rated current)
Overload capacity: 150%, 1min
Carrier frequency: 4 - 6kHz
Environmental conditions
Applicable places: Installed in an environment without direct sunlight, no dust, no corrosive gas, no flammable gas, no oil mist, no steam, no water droplets
Ambient temperature: -10-+40°C
Altitude: 1000m
Ambient humidity: 5-95%, no condensation allowed
Vibration: 3.5 m/s², 2-9Hz; 10m/s²，9——120Hz
Storage temperature: -40-+70°C
Protection level: IP20 below 4T055, IP00 for 4T110 and above
This article introduces the new STEP HVAC converter AS550 products, if you are interested in the new STEP inverter, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business
|
More on that
|
Xinshida/STEP vector inverter AS450 input current 3.7~1044A
Introduction: Xinshida AS450 is a universal vector inverter. The product not only has typical V/F control technology, but also adopts no speed sensor vector control technology, closed-loop vector control and torque control technology, and combines the domestic application characteristics to further strengthen the reliability of the product.
|
|
Xinshida/STEP Industrial Fan STEP-F series feels 8-10°C cooling
Introduction: Xinshida/STEP Industrial Fan STEP-F Series New energy-saving and environmentally friendly large-scale industrial fan and other energy-saving and environmentally friendly products.
Features:
Ambient cooling
Feel the temperature drop by 8-10°C
The natural wind STEP-F series ceiling fan adopts ultra-large diameter fan blades, which can be operated at low speed.
|
|
Xinshida/STEP Inverter AS520 Series Torque accuracy±5%
Introduction: AS520 series products are an inverter drive unit developed for the use of common DC bus. The product adopts advanced vector control technology and torque control technology, which not only has the same excellent control performance as the international high-quality inverter, but also combines the hoisting machinery industry ...
|
|
Xinshida/STEP Motion Controller SC30-B6H RAM capacity 1G
Introduction: Xinshida/STEP motion controller SC30-B6H, medium-sized PAC, integrated control, one-stop connection, one-platform design; Based on the CoDeSys platform, it fully supports the IEC61131-3 standard programming language; Support configuration programming, support EtherCAT, CANOpen, Etherne...
|
|
Xinshida/STEP inverter AS170NT Input frequency 45 -65Hz
Introduction: Xinshida/STEP AS170NT inverter is rated for operation at 45°C high temperature, which is suitable for the high temperature environment of the thermal power station; 1.5-75kW full range of piggyback installation, saving installation space; IP54 high protection, PCB to meet the 3C4 environment coating; Multiple controller options: temperature/differential temperature control ...
|
|
Xinshida/STEP high-voltage inverter ME800 vibration is less than 0.5g
Introduction: ME800 series high-voltage inverter has power electronics technology and vector control technology in one of the high-high voltage source high-voltage inverter, it greatly suppresses the input harmonic current on the grid side through the phase-shifting rectifier transformer, and realizes the voltage superposition through the cascade of multi-stage H-bridge power units.
|
|
Xinshida/STEP low-power inverter AS610 series carrier frequency 2-10kHz
Introduction: Xinshida AS610 inverter high reliability design is a small power inverter, is specially developed for small power lifting ends, its advantages are small size, high performance, can be used for asynchronous motor and synchronous motor drive, high protection level.
...
|
|
The AHS series of STEP soft starters has a voltage range of 6/10kV
Introduction: Xinshida/STEP soft starter AHS series, the working principle of the soft start device is to control the output voltage by controlling the trigger angle of the thyristor, to meet the different current and voltage requirements in the process of motor starting. During the motor start-up process, according to the pre-set starting ...
|
|
Xinshida/STEP inverter AS900 series rated voltage DC540V
Introduction: Xinshida AS900 series 3-in-1 new energy vehicle auxiliary motor controller, for PHEV and EV; High power density; High overload capacity; Built-in voltage, current, temperature detection; Integrated drive protection.
Product References ...
|
|
Xinshida/STEP Motion Controller SC30-A6H RAM capacity 2G
Introduction: Xinshida/STEP motion controller SC30-A6H, medium-sized PAC, integrated control, one-stop connection, one-platform design; Based on the CoDeSys platform, it fully supports the IEC61131-3 standard programming language; Support configuration programming, support EtherCAT, CANOpen, Etherne...
|
|
Xinshida/STEP bus motion control card ADT-6320E 16-axis bus control
Introduction: Xinshida/STEP bus motion control card ADT-6320E, bus control card, support 16-axis bus control, 16 bus IO module expansion, servo support QXE, EM, Panasonic, Sanyo with EtherCAT protocol communication servo, with motion trajectory pre-processing planning function, support two groups ...
|
|
Xinshida/STEP inverter AS560 series output voltage three-phase 460ACV
Introduction: AS560 inverter is a customized product for on-board air conditioning applications, which can be matched with AC inverter compressor and DC inverter compressor. The design of the inverter is based on an in-depth understanding of the characteristics of the industry, and the design reduces some non-essential functions in the industry, improves the compactness of the product and reduces the ...
|
|
The new STEP motion controller SC20-A3H6 has a RAM capacity of 32M
Introduction: Xinshida/STEP motion controller SC20-A3H6, economical PAC, developed based on CoDeSys platform, fully supports IEC61131-3 standard programming language; Support PLCopen toolkit, can realize single-axis, multi-axis movement, IO control, support basic electronic gears, electronic ...
|
|
The STEP Motion Controller AMC1610C-016 has a capacity of 512MB
Introduction: Xinshida/STEP Motion Controller AMC1610C-016, special aircraft motion controller; Based on the CoDeSys platform, it fully supports the IEC61131-3 standard programming language; Support configuration programming, support EtherCAT, CANOpen, EthernetIP and other industrial fieldbus protocols ...
|
|
Xinshida/STEP motor 80S2S rated torque 2.4N.m
Introduction: Xinshida/STEP motor 80S2S, 2500 line incremental/wire-saving encoder, optional absolute encoder;
Product parameters
Power range: 750W
Input voltage: AC - 220V
Rated torque: 2.4N.m
Encoder Type: 25 ...
|
|
Xinshida/STEP inverter AS500 rated input current 7-1040A
Introduction: Xinshida/STEP inverter AS500 not only has typical V/F control technology, no speed sensor vector control technology, closed-loop vector control and torque control technology, but also adopts synchronous open-loop vector control technology, synchronous closed-loop vector control technology, and combines the domestic application characteristics.
|
|
Xinshida/STEP Inverter AS700 Series Torque Accuracy±5%
Introduction: AS700 series engineering inverter has the characteristics of modularity, high reliability and flexible expansion, which can provide a complete set of motor drive system solutions, and can also provide modules to meet the needs of users, OEMs and system integration. AS700 series engineering inverter is according to the current ...
|
|
Xinshida/STEP vector inverter AS180 input current 5.3A~1186A
Introduction: AS180 series inverter is a general-purpose inverter designed for the Chinese market. The product adopts Germany technology, made in China, and combined with the domestic application characteristics, further strengthens the reliability of the product, the adaptability of the environment and the customized and industrialized design, with excellent ...
|
|
Xinshida/STEP low-power inverter AS-M20 rated frequency 50/60Hz
Introduction: AS-M20 series inverter adopts advanced non-speed sensor vector technology, advanced motor parameter identification, online estimation technology and advanced flux estimation technology, both in the speed regulation range and in the dynamic response, control accuracy and low-frequency torque have been greatly improved.
|
|
Xinshida/STEP bus type open operation control platform AMC1600E
Introduction: Xinshida/STEP bus open operation control platform is an open operation control platform launched by Xinshida AMC1600E Support IEC6113-3 programming, support 16-axis bus and 6-axis pulse hybrid control, HMI, IO, DA, AD can be flexibly configured according to the actual situation of customers.
...
|
|
Contact
working hours
