Xinshida/STEP inverter AS500 rated input current 7-1040A

Introduction: Xinshida/STEP fire inspection inverter AS180F Features: There is no need to set any parameters, and it can be used directly after wiring A new special algorithm is used to fundamentally solve the problem of overcurrent protection for large motor starting The motor matching ability of the ultra-wide power range is realized.

Introduction:Xinshida/STEP inverter AS510 series adopts advanced controllable rectification technology, with LCL filter to achieve active rectification, providing constant DC power supply and energy feedback for the system, and can run 1 or more inverter units on the DC bus to form a four-quadrant operation of multi-...

Introduction: Xinshida/STEP bus motion control card ADT-6320E, bus control card, support 16-axis bus control, 16 bus IO module expansion, servo support QXE, EM, Panasonic, Sanyo with EtherCAT protocol communication servo, with motion trajectory pre-processing planning function, support two groups ...

Introduction: AS520 series products are an inverter drive unit developed for the use of common DC bus. The product adopts advanced vector control technology and torque control technology, which not only has the same excellent control performance as the international high-quality inverter, but also combines the hoisting machinery industry ...

Introduction: Xinshida/STEP elevator special inverter STEPAS320, using 32-bit motor special digital signal processor DSP, programmable ultra-large-scale logic CPLD and intelligent power module IPM, innovative load-free sensor start compensation technology, so that the elevator does not need to install weighing devices ...

Introduction: AS560 inverter is a customized product for on-board air conditioning applications, which can be matched with AC inverter compressor and DC inverter compressor. The design of the inverter is based on an in-depth understanding of the characteristics of the industry, and the design reduces some non-essential functions in the industry, improves the compactness of the product and reduces the ...

Introduction: Xinshida/STEP motor 80S2S, 2500 line incremental/wire-saving encoder, optional absolute encoder; Product parameters Power range: 750W Input voltage: AC - 220V Rated torque: 2.4N.m Encoder Type: 25 ...

Introduction: Xinshida/STEP servo motor 60B series Product parameters Rated power: 200W——400W Rated line voltage: 220VAC (-15-+10%), 50-60Hz Rated line current: 1.55A——2.6A Rated speed: 300 ...

Introduction: Xinshida/STEP soft starter AHS series, the working principle of the soft start device is to control the output voltage by controlling the trigger angle of the thyristor, to meet the different current and voltage requirements in the process of motor starting. During the motor start-up process, according to the pre-set starting ...

Introduction: Xinshida/STEP universal servo drive K1AS Features: Powerful internal position mode allows for planning multi-path continuous operation for rich motion control functions; Support up to 32 groups of data planning, each group of data can be set according to the needs of 2, find the number of pulses ...

Introduction: Xinshida/STEP high-voltage solid-state soft starter AHS80, the working principle of the soft start device is to control the output voltage by controlling the trigger angle of the thyristor, so as to meet the different current and voltage requirements in the process of motor starting. During the motor start-up process, according to the pre-set ...

Introduction: Xinshida/STEP motion controller SC30-A6L, medium-sized PAC, integrated control, one-stop connection, one-platform design; Based on the CoDeSys platform, it fully supports the IEC61131-3 standard programming language; Support configuration programming, support EtherCAT, CANOpen, Etherne...

Introduction: The ADT-8969G1 is a six-axis motion control card based on the computer PCI bus, which can support up to 10 control cards in one system and control 60 servo/stepper motors. It has a variety of acceleration and deceleration of T-type, S-type and E-type, point position and trajectory ...

Introduction: Xinshida/STEP servo motor 130SH Product parameters Rated power: 1.0kW——3kW Number of pole pairs: 5 Rated torque: 4.77N.m——14.3N.m Maximum torque: 14.3N.m——42.9N.m Rated speed: 200 ...

Introduction: The new Shida/STEP bus IO module ET1616A Product parameters Input channels: 16 channels Input voltage: 24VDC Signal input type: optocoupler input Input logic: Selectable Active-High Input current: 7mA——15mA ...

Introduction: Xinshida AS560 two-in-one product is the integration and development of AS560 inverter and DCDC two platforms. High integration, compact size, easy for customers to use. Product parameters Inverter rated power: 11—— ...

Introduction: AS-M20 series inverter adopts advanced non-speed sensor vector technology, advanced motor parameter identification, online estimation technology and advanced flux estimation technology, both in the speed regulation range and in the dynamic response, control accuracy and low-frequency torque have been greatly improved.

Introduction: Xinshida/STEP bus motion control card ADT-6329E, supports up to 64 nodes, has the function of motion trajectory preprocessing planning, supports four groups of independent preprocessing interpolation channels, supports up to 32 axis interpolation, a variety of acceleration and deceleration control, spatial arc interpolation, logic position variable ring ...

Introduction: Xinshida/STEP controller supports 6 axes, 36 inputs, and 24 outputs AMC1600P. Product parameters Input voltage: 24V Universal input minimum current: 2mA Universal input maximum current: 8mA Rated output current: 1A (single channel max ...

Introduction: Xinshida/STEP AS170NT inverter is rated for operation at 45°C high temperature, which is suitable for the high temperature environment of the thermal power station; 1.5-75kW full range of piggyback installation, saving installation space; IP54 high protection, PCB to meet the 3C4 environment coating; Multiple controller options: temperature/differential temperature control ...