Xinshida/STEP motor 80S2S rated torque 2.4N.m

Introduction: The AS720 series of STEP inverter is an airborne all-in-one product developed for the HVAC industry based on the mature hardware platform of Xinshida. The inverter is cooled by air conditioning refrigerant, with high power density, and the design process takes into account the working environment of HVAC, installation ...

Introduction: Xinshida/STEP escalator special inverter AS310, smooth tracking start, can be smooth start of the rotating motor at any time with low impact Features: High-performance software features The asynchronous motor MTPA technology is adopted to reduce the motor loss and improve the system ...

Introduction: Xinshida/STEP soft starter AHS series, the working principle of the soft start device is to control the output voltage by controlling the trigger angle of the thyristor, to meet the different current and voltage requirements in the process of motor starting. During the motor start-up process, according to the pre-set starting ...

Introduction: ME800 series high-voltage inverter has power electronics technology and vector control technology in one of the high-high voltage source high-voltage inverter, it greatly suppresses the input harmonic current on the grid side through the phase-shifting rectifier transformer, and realizes the voltage superposition through the cascade of multi-stage H-bridge power units.

Introduction: Xinshida/STEP high-voltage solid-state soft starter AHS80, the working principle of the soft start device is to control the output voltage by controlling the trigger angle of the thyristor, so as to meet the different current and voltage requirements in the process of motor starting. During the motor start-up process, according to the pre-set ...

Introduction: Xinshida/STEP motion controller SC20-A3H6, economical PAC, developed based on CoDeSys platform, fully supports IEC61131-3 standard programming language; Support PLCopen toolkit, can realize single-axis, multi-axis movement, IO control, support basic electronic gears, electronic ...

Introduction: Xinshida/STEP Industrial Fan STEP-F Series New energy-saving and environmentally friendly large-scale industrial fan and other energy-saving and environmentally friendly products. Features: Ambient cooling Feel the temperature drop by 8-10°C The natural wind STEP-F series ceiling fan adopts ultra-large diameter fan blades, which can be operated at low speed.

Introduction: Xinshida/STEP HVAC inverter AS550 is a 400V class 380V-460V current vector control compact high-performance inverter, suitable for three-phase AC asynchronous motors, permanent magnet synchronous motors and servo motors with a motor capacity of 5.5-22kW. Features: Parameter...

Introduction: Xinshida/STEP inverter AS620 series is a special inverter specially designed for the elevator market, suitable for elevator drive occasions. The product adopts excellent motor control technology, which not only has excellent control performance, but also combines the application characteristics of Chinese elevators.

Introduction: AS180 series inverter is a general-purpose inverter designed for the Chinese market. The product adopts Germany technology, made in China, and combined with the domestic application characteristics, further strengthens the reliability of the product, the adaptability of the environment and the customized and industrialized design, with excellent ...

Introduction: Xinshida/STEP motion controller SC20-A3L, economical PAC, developed based on CoDeSys platform, fully supports IEC61131-3 standard programming language; Support PLCopen toolkit, can realize single-axis, multi-axis movement, IO control, support basic electronic gears, electronic ...

Introduction: The ADT-8969G1 is a six-axis motion control card based on the computer PCI bus, which can support up to 10 control cards in one system and control 60 servo/stepper motors. It has a variety of acceleration and deceleration of T-type, S-type and E-type, point position and trajectory ...

Introduction: ME500 series high-performance vector inverter not only has typical V/F control technology, open-loop vector control technology, closed-loop vector control and torque control technology, but also adopts synchronous open-loop vector control technology, synchronous closed-loop vector control technology, and combines the domestic application characteristics, ...

Introduction: Xinshida/STEP AS170NT inverter is rated for operation at 45°C high temperature, which is suitable for the high temperature environment of the thermal power station; 1.5-75kW full range of piggyback installation, saving installation space; IP54 high protection, PCB to meet the 3C4 environment coating; Multiple controller options: temperature/differential temperature control ...

Introduction: Xinshida/STEP servo motor 60B series Product parameters Rated power: 200W——400W Rated line voltage: 220VAC (-15-+10%), 50-60Hz Rated line current: 1.55A——2.6A Rated speed: 300 ...

Introduction: AS-M20 series inverter adopts advanced non-speed sensor vector technology, advanced motor parameter identification, online estimation technology and advanced flux estimation technology, both in the speed regulation range and in the dynamic response, control accuracy and low-frequency torque have been greatly improved.

Introduction: ME700 series engineering drive is a common DC multi-drive inverter specially designed and developed for heavy-duty machinery and equipment in the rubber industry. The product adopts advanced vector control technology and torque control technology, which not only has the same excellent control performance as the international reliable inverter.

Introduction: Xinshida/STEP motion controller SC30-A6L, medium-sized PAC, integrated control, one-stop connection, one-platform design; Based on the CoDeSys platform, it fully supports the IEC61131-3 standard programming language; Support configuration programming, support EtherCAT, CANOpen, Etherne...

Introduction: Xinshida/STEP Motion Controller AMC1610C-016, special aircraft motion controller; Based on the CoDeSys platform, it fully supports the IEC61131-3 standard programming language; Support configuration programming, support EtherCAT, CANOpen, EthernetIP and other industrial fieldbus protocols ...

Introduction: Xinshida/STEP bus motion control card ADT-6329E, supports up to 64 nodes, has the function of motion trajectory preprocessing planning, supports four groups of independent preprocessing interpolation channels, supports up to 32 axis interpolation, a variety of acceleration and deceleration control, spatial arc interpolation, logic position variable ring ...