The STEP Motion Controller AMC1610C-016 has a capacity of 512MB

Introduction: Xinshida/STEP bus open operation control platform is an open operation control platform launched by Xinshida AMC1600E Support IEC6113-3 programming, support 16-axis bus and 6-axis pulse hybrid control, HMI, IO, DA, AD can be flexibly configured according to the actual situation of customers. ...

Introduction: Xinshida/STEP fire inspection inverter AS180F Features: There is no need to set any parameters, and it can be used directly after wiring A new special algorithm is used to fundamentally solve the problem of overcurrent protection for large motor starting The motor matching ability of the ultra-wide power range is realized.

Introduction: The new Shida/STEP bus IO module ET1616A Product parameters Input channels: 16 channels Input voltage: 24VDC Signal input type: optocoupler input Input logic: Selectable Active-High Input current: 7mA——15mA ...

Introduction: Xinshida/STEP bus motion control card ADT-6329E, supports up to 64 nodes, has the function of motion trajectory preprocessing planning, supports four groups of independent preprocessing interpolation channels, supports up to 32 axis interpolation, a variety of acceleration and deceleration control, spatial arc interpolation, logic position variable ring ...

Introduction: Xinshida AS450 is a universal vector inverter. The product not only has typical V/F control technology, but also adopts no speed sensor vector control technology, closed-loop vector control and torque control technology, and combines the domestic application characteristics to further strengthen the reliability of the product.

Introduction: Xinshida AS610 inverter high reliability design is a small power inverter, is specially developed for small power lifting ends, its advantages are small size, high performance, can be used for asynchronous motor and synchronous motor drive, high protection level. ...

Introduction: Xinshida/STEP motion controller SC20-A3L, economical PAC, developed based on CoDeSys platform, fully supports IEC61131-3 standard programming language; Support PLCopen toolkit, can realize single-axis, multi-axis movement, IO control, support basic electronic gears, electronic ...

Introduction: ME800 series high-voltage inverter has power electronics technology and vector control technology in one of the high-high voltage source high-voltage inverter, it greatly suppresses the input harmonic current on the grid side through the phase-shifting rectifier transformer, and realizes the voltage superposition through the cascade of multi-stage H-bridge power units.

Introduction: AS600 series hoisting inverter adopts advanced vector control technology and torque control technology, which not only has the same excellent control performance as the international high-quality inverter, but also combines the application characteristics of the hoisting machinery industry to further strengthen the reliability and environmental protection of the product.

Introduction: Xinshida/STEP servo motor 130SH Product parameters Rated power: 1.0kW——3kW Number of pole pairs: 5 Rated torque: 4.77N.m——14.3N.m Maximum torque: 14.3N.m——42.9N.m Rated speed: 200 ...

Introduction: Xinshida AS900 series 3-in-1 new energy vehicle auxiliary motor controller, for PHEV and EV; High power density; High overload capacity; Built-in voltage, current, temperature detection; Integrated drive protection. Product References ...

Introduction:Xinshida/STEP inverter AS510 series adopts advanced controllable rectification technology, with LCL filter to achieve active rectification, providing constant DC power supply and energy feedback for the system, and can run 1 or more inverter units on the DC bus to form a four-quadrant operation of multi-...

Introduction: Xinshida/STEP bus motion control card ADT-6320E, bus control card, support 16-axis bus control, 16 bus IO module expansion, servo support QXE, EM, Panasonic, Sanyo with EtherCAT protocol communication servo, with motion trajectory pre-processing planning function, support two groups ...

Introduction: Xinshida/STEP inverter AS620 series is a special inverter specially designed for the elevator market, suitable for elevator drive occasions. The product adopts excellent motor control technology, which not only has excellent control performance, but also combines the application characteristics of Chinese elevators.

Introduction: Xinshida/STEP inverter AS800 greatly suppresses the input harmonic current on the grid side through the phase-shifting rectifier transformer, realizes voltage superposition through the cascade of multi-stage H-bridge power units, has excellent high-voltage sine wave output, and can directly drive high-voltage motors, without installing any...

Introduction: AS520 series products are an inverter drive unit developed for the use of common DC bus. The product adopts advanced vector control technology and torque control technology, which not only has the same excellent control performance as the international high-quality inverter, but also combines the hoisting machinery industry ...

Introduction: AS170 series motor integrated inverter is a high protection level motor drive all-in-one machine developed by Shanghai Singrina Xinshida Motor Co., Ltd., which adopts a unique appearance design and installation method, with local and remote control mode, which is more convenient and reliable to install and use.

Introduction: The AS720 series of STEP inverter is an airborne all-in-one product developed for the HVAC industry based on the mature hardware platform of Xinshida. The inverter is cooled by air conditioning refrigerant, with high power density, and the design process takes into account the working environment of HVAC, installation ...

Introduction: The ADT-8969G1 is a six-axis motion control card based on the computer PCI bus, which can support up to 10 control cards in one system and control 60 servo/stepper motors. It has a variety of acceleration and deceleration of T-type, S-type and E-type, point position and trajectory ...

Introduction: Xinshida/STEP motion controller SC30-A6L, medium-sized PAC, integrated control, one-stop connection, one-platform design; Based on the CoDeSys platform, it fully supports the IEC61131-3 standard programming language; Support configuration programming, support EtherCAT, CANOpen, Etherne...