Sparsely populated villages in the Andes provide a steady stream of energy.
Integrate various generators and batteries such as solar, wind, and diesel for optimal management.
We want to provide stable electricity to villages in the Andes
We will solve this problem by using renewable energy and a power storage system that compensates for its instability
Promote the efficient use of decentralized electricity and renewable energy with superior control technology
In the past, fossil fuels were an inexhaustible resource that was indispensable for human life and a heavy burden on the global environment. Wind and solar power generation, which are attracting attention as renewable energy sources without relying on fossil fuels, also face several challenges if they are to be connected to existing power grid systems.
Under normal conditions, power supply needs to be carried out in a state of balance between supply and demand, and the existing power grid system uses very excellent control technology to rationalize the balance between supply and demand. In addition, in order to avoid the risk of power outages, we maintain high-quality voltage, frequency, and phase in the power supply system at all times, so that consumers can use electricity with peace of mind.
In solar power generation systems, Nidec ASI has built a power supply system that can provide sustainable and high-quality power to the existing power grid system, as well as an optimal power generation system that can provide a stable power supply to remote islands and other remote locations. The world is provided with systems and solutions suitable for various applications.
From the equipment to the upper system, it can be covered to achieve one-stop stable power supply
Based on solar power generation and wind power generation, the energy storage system is used to solve the unstable factors
Take, for example, the smart microgrid project in the village of Óyago in Chile. The village of Óyago is a village located at an altitude of 3,660 meters above sea level in the Andes.
In this severe environment, large-scale energy storage systems have been installed to improve the unstable power generation methods of solar power generation and wind power generation. In addition, we integrated with the diesel generators that had been installed and started a project to achieve a stable power supply.
Depending on the population of the village and the number of facilities, the amount of electricity required for each time period is calculated on a 24-hour basis. At the same time, the sunshine hours and wind power of 365 days a year are calculated from the previous data to determine the most reasonable scale of power generation equipment, including cost. In addition, based on the determination of the optimal system structure for the realization of this power generation scale, we will design the system and promote the development, manufacturing, and installation of machinery and equipment. This is based on Nidec ASI's experience in building many power grid systems around the world with renewable energy at its core. Thanks to Nidec ASI's technology and experience, an environment where you can read a book at night has been created in Aoyago Village, and home appliances such as TVs and refrigerators are becoming more and more popular.
In order to make effective use of renewable energy, we use a power management system to supply a stable power supply
|
More on that
|
Specifications for the use of Nidec inverters
How can I operate a Nidec inverter to extend its service life?
Modern industrial control systems mostly use microcomputer or PLC control technology, and in the process of system design or transformation, we must pay attention to the interference of inverter to microcomputer control board. Because the user's self-designed microcomputer control board is generally ...
|
|
Japan Denko's own CAE technology
In order to explore the optimal structure of hydrodynamic bearings, modeling technology and analysis software were developed in-house.
Japan Electronics has created a design method that makes full use of the computing power of supercomputers to analyze the fluids of fan and blower modules. At the same time, the company has also ...
|
|
Sub-micron precision machining technology
It has achieved precision machining technology that has a high global market share of hard disk drive motors
It is the backbone technology that supports the manufacturing business of the Japan Electricity Group.
The Japan Dec Group manufactures motors, sensors, fans, blowers, pumps and other products, with special requirements for high precision ...
|
|
Nidec's high-power switched reluctance motor helps forging customers "like a tiger with wings"
In June 2016, Nidec (Beijing) successfully commissioned the YDE53 series 2500 CNC electric screw press produced by Yingkou Forging Co., Ltd. (hereinafter referred to as Yingforging). This 2500-ton electric screw press is mainly driven by two 220kW switched reluctance motors.
|
|
Brushless motor
Brushless DC motors have the characteristics of energy saving, long life, low noise, small size and light weight.
Japan Denco is one of the world's leading high-performance motor developers and manufacturers.
Although the brush motor has the advantages of high efficiency, miniaturization, power drive, and low production cost, at the same time, ...
|
|
GAC Aion New Energy Automobile Co., Ltd.'s new electric vehicle uses Japan Denco's (Nidec) E-Axle drive motor system (100kW)
GAC Aion New Energy Automobile Co., Ltd. launched its all-new electric vehicle "Aion Y" (*1) in March 2021, which uses the "N" of Japan's (Nidec) E-Axle's drive motor system.
|
|
Nidec launches the new Digitax SF series of servo drives
Nidec Control Techniques has expanded its control techniques servo product line with the launch of the Digitax SF series of servo drives and HDA series servo motors, DIGITAX SF servo systems that are smaller and more powerful.
...
|
|
Nidec - Ultra-thin and ultra-compact "UltraFlo FDB" in pursuit of extreme dimensions
A quadrangular fan motor with a thickness of 3 mm or less and a side length of 20 mm. We do our best in all aspects of design, analysis, and manufacturing to challenge the limits of size.
In today's market where ultra-thin laptops are still becoming popular, with the high precision of computer displays and the ability to decode video ...
|
|
Nidec's Technological Capabilities High-end CAE technology that enables optimal module unit development
By introducing coupling analysis and optimal design techniques, it is possible to speed up development
It can also respond to the increasing demand for high-end module unit design
It is not a single motor, but a modular unit including mechanical parts such as fans, blowers, pumps, etc.
|
|
Brushless DC motor for ovens
We have developed products that make it possible to make baking results undifferentiated and easily cope with complex cooking recipes
A brushless DC motor with high-end control technology is required to become a reality
You want to have a variety of cooking modes to experiment with a variety of cooking recipes
Accurate operation control and precise temperature control can be carried out.
|
|
Coordinated control technology for motors
The Intelligent Motor™, which has a built-in compact computer, can communicate remotely via a wireless network, enabling real-time, high-precision coordinated control.
In recent years, with the popularization of the Internet of Things (IoT) (Internet of Things), a wide variety of robots can be used ...
|
|
Nidec acquires Embraco
Nidec today announced that it has completed the acquisition of Whirlpool's compressor business, Embraco, on July 2, 2019, following the approval of the European Commission. The acquisition is made pursuant to the acquisition plan announced in a Nidec press release dated April 24, 2018. After the acquisition of ...
|
|
Nidec - Institute of Production Technology
The Industrial Technology Research Institute aims to contribute to the world by continuously strengthening its manufacturing foundation to accelerate the growth of the Japan Electricity Group, and by continuously creating new technologies through network building with universities, research institutes, and companies.
Functions and Responsibilities
Institute of Production Technology ...
|
|
Nidec – Thinning of spindle motors for hard disk drives (HDDs)
Ultra-thin laptops of recent years.
Core equipment: HDD motors.
Japan Denco (Nidec), which has the world's No. 1 market share in HDD spindle motors, also supports the upgrade of notebook PCs through the thinning of motors.
|
|
Internet of Things
The era of big data, in which everything in the world is connected to the Internet, has arrived
The world will become rich and colorful thanks to the action of motors, the "industrial food" that make up the infrastructure of society.
In the past, computers and handwriting panels connected to the Internet were mainly human input devices. But...
|
|
The reducer also has to look at Japan Den's new treasure!
The robotics, machine tools, and semiconductor industries are becoming
Key industries in the domestic and foreign markets now and in the next few years.
Japan Denco Shinho started the reducer as early as 2007
R&D and production, is the earliest domestic production and sales of reducer company.
Years of hard work in the industry and ...
|
|
The drive motor in the WALKCAR is a "portable car".
Improvements to the motor housing structure and high-density winding design have made the idea of a "portable car" a reality
Today, all types of transportation, including cars, scooters, and scooters, are moving towards electrification. Among them, one has a "standing drive" and "four ...
|
|
Don't turn your head! Everything you want, ahead (Nidec)
With the continuous development and progress of science and technology,
Automatic parking systems, active safety systems, panoramic cameras, etc.,
More and more high-tech products are widely used in automobiles.
Escort for our driving,
The HUD I want to introduce to you today is also to let the driving process
More...
|
|
The foundation stone of the new building in India has been laid, and Nidec's production capacity has been upgraded again!
Electric two-wheelers (including e-bikes with pedals)
Global sales are expected to grow from 2.6 million units in 2020 to 13 million units in 2030. Faced with the growing demand for electric two-wheeler accessories, Nidec decided to build a new plant to increase the number of drive motors for electric bicycles.
|
|
Nider Scientific has issued a notice on the new electric power steering system motor power pack
Nidec Co., Ltd. (hereinafter referred to as "Nidec") has developed a new electric power steering motor power pack*1 (hereinafter referred to as "EPS-PP": Electric Power Steering Motor Power Pack).
Since the nineties of the last century, ...
|
|
Contact
working hours
