The era of big data, in which everything in the world is connected to the Internet, has arrived
The world will become rich and colorful thanks to the action of motors, the "industrial food" that make up the infrastructure of society.
In the past, computers and handwriting panels connected to the Internet were mainly human input devices. However, with the advancement of science and technology, the cost of microprocessors and communication modules has also developed, and "things" that have not been connected to the Internet until now are connected to the network and can exchange information through the network. In this case, "things", such as manufacturing equipment, household appliances, automobiles, and vending machines on street corners, upload information to the network and automatically report operations on a machine-to-machine basis, activate alarms, or signal for additional materials or place orders without manual use.
The information emitted by these "things" can not only be processed in a machine-to-machine manner, but can also be stored as big data, and the results can be fed back into operation planning, production planning, design, and product development by analyzing the stored big data. At that time, motors, which are known as the "industrial food of the 21st century," will be used in all products, including manufacturing equipment in factories, as well as home appliances, and as sensors that not only drive but also output data, as well as as devices for creating big data, and as representatives of "things" in the Internet of Things era.
The trend of bringing all "things" connected to the Internet into the production line is being used to flexibly respond to the improvement of production efficiency and the production of a large variety of small quantities. In Germany, the government and private companies have jointly implemented an industrial reform project called "Industry 4.0". The ultimate goal of Industry 4.0 is that the entire supply chain, including the manufacturing equipment in the factory, and even the sales outlets, factories, and distribution channels, is connected to the Internet, and can autonomously and automatically manufacture products.
In this way, the same trend as "Industry 4.0" is gradually taking place not only in Germany but also in other countries around the world to dramatically improve the performance of manufacturing plants and social infrastructure by integrating hardware and IT. The Japan Dec Group is actively promoting the formulation and implementation of IoT application plans based on the abundant hardware resources that provide motors, modules and units with motors as the core, and manufacturing equipment and inspection equipment such as robots, as well as software such as big data analysis.
For example, the aim is to establish a system for predicting failures by installing multiple sensors on presses installed at Japan Electric Corporation's factories and analyzing data derived from the correlation between various sensors to detect the precursors of abnormalities. In the future, we aim to achieve machine-to-machine optimization, such as feeding back the data obtained from the inspection machine to the manufacturing equipment at the front end to improve quality, etc., without the need for manual work.
Japan Electric Power has a large share of the motor market, and by making full use of the big data collected by the "industrial grain," the motors that make up the social infrastructure, various measures can be developed. It is also possible to improve production efficiency in factories by collecting operational information on manufacturing equipment and transportation robots, and by collecting information on traffic congestion based on information on hybrid and electric vehicles. The Japan Dec Group has deepened its relevance to social infrastructure by advancing the Internet of Things (IoT) and is supporting the development of social infrastructure in a more efficient direction.
|
More on that
|
R&D of next-generation motor control technology
Successfully developed a high-precision step angle control system that can reach the same level as the HB stepper motor and is specially used for brushless DC motors. We provide high-efficiency, compact, and lightweight next-generation motors for various product fields such as multifunctional multifunction machines.
Further improvement of the current ...
|
|
E-Axle drive motor system (EV drive motor system)
Combining the technologies of the Japan Dec Group, we will commercialize the "heart of electric vehicles".
- Powerful leadership in the global automotive electrification process with its compact and lightweight products, integration of components, and rapid R&D speed
- Contribute to greater freedom of vehicle design, ...
|
|
Brushless DC motor + fan blade module for electric fan
The electric fan market has also entered the development trend of green, energy-saving, high-efficiency and multi-functional products.
We will provide you with a new generation of electric fan products that are small, lightweight, multi-functional, and have multiple operating modes
An energy-efficient, compact and lightweight electric fan with a fine-tuning of air volume
In today's home appliance sector ...
|
|
Nidec – Thinning of spindle motors for hard disk drives (HDDs)
Ultra-thin laptops of recent years.
Core equipment: HDD motors.
Japan Denco (Nidec), which has the world's No. 1 market share in HDD spindle motors, also supports the upgrade of notebook PCs through the thinning of motors.
|
|
AGV system
With the goal of opening up new markets in the field of logistics, we are continuously improving the performance of AGVs
AGVs (Automated Guided Vehicles), which are currently active in various production lines, are expected to shine in the logistics field, where there is a lot of room for growth. Like a service dedicated to the convenience ...
|
|
The solution to the problem of leakage of Nidec inverters
First, the cause of the leakage problem
According to the functional block diagram of the inverter controlling the operation of the motor (Fig. 1), the three-phase power supply is rectified by the inverter rectifier bridge, and then sent to the inverter bridge (IGBT) through capacitor filtering, and then controlled by the three-phase alternating current with adjustable output frequency and voltage of the inverter bridge.
|
|
Nidec's Technological Capabilities High-end CAE technology that enables optimal module unit development
By introducing coupling analysis and optimal design techniques, it is possible to speed up development
It can also respond to the increasing demand for high-end module unit design
It is not a single motor, but a modular unit including mechanical parts such as fans, blowers, pumps, etc.
|
|
Nidec – About the F5B
In the world's top electric glider competition
Pushing the limits of miniaturization, high power, and high efficiency motors
With global warming and crude oil on the verge of depletion, the current automotive industry is facing tremendous changes, and the development trend of electrified vehicles will continue to accelerate.
|
|
Automatic handling robot drive module
The aim is to realize more labor-saving and efficient transportation in the warehouse> and develop a high-precision, high-efficiency, and low-cost drive module for automatic handling robots
By leveraging the synergies of the Group, we will develop efficient drive modules.
Supporting the expanding e-commerce market.
On one side stands ...
|
|
Nidec's high-power switched reluctance motor helps forging customers "like a tiger with wings"
In June 2016, Nidec (Beijing) successfully commissioned the YDE53 series 2500 CNC electric screw press produced by Yingkou Forging Co., Ltd. (hereinafter referred to as Yingforging). This 2500-ton electric screw press is mainly driven by two 220kW switched reluctance motors.
|
|
Japan Servo has launched a motor for vending machines equipped with Can-Bus communication functions
Japan Servo Co., Ltd. officially launched a brushless DC motor equipped with Can-Bus communication. This motor is mainly used for the push mechanism of vending machine.
"Brushless DC motor equipped with Can-Bus communication function" Can-Bus (Controller Area Network-B ...
|
|
Nidec Co., Ltd. (Nidec) co-developed an air purifier equipped with a coaxial reversing propeller fan and won the 2021 Energy Saving Award
Japan Denco (Nidec) and Zojirushi Co., Ltd. jointly developed the PU-AA50 air purifier equipped with a coaxial reversing propeller fan, which won the "Energy Conservation Center Chairman's Award" in the "Product and Business Model Category" of the 2021 Energy Conservation Awards Japan.
|
|
The basic technology of revolutionizing motors
We are conducting research on basic technologies for the development of innovative motor products with high torque density, low noise, and low vibration.
Recently, one of the high-profile robot application products is a product called service robots. Service robots are different from industrial robots used in factories ...
|
|
The reducer also has to look at Japan Den's new treasure!
The robotics, machine tools, and semiconductor industries are becoming
Key industries in the domestic and foreign markets now and in the next few years.
Japan Denco Shinho started the reducer as early as 2007
R&D and production, is the earliest domestic production and sales of reducer company.
Years of hard work in the industry and ...
|
|
Development of a built-in intelligent motor for a microcomputer
It is necessary to build a smart motor in accordance with the high performance, miniaturization, and low cost of the computer
In the past, there was an idea of building a computer into the motor and controlling the motor on the motor side. However, a computer that can be built into a motor must be small and low-cost, and have a real ...
|
|
When a heat wave hits, cars can also suffer from heat stroke?
A new round of heat wave is coming, and it is running non-stop
The car motor is still working non-stop in the high temperature,
Drive the car through the scorching sun,
Poor heat dissipation will inevitably cause the car to "heat stroke".
What is the key to cooling down the heat of the car?
Come and see Nidec's
The four major heat dissipation generals ...
|
|
Fluid bearings
It was the first to invest in the development and development of liquid bearings.
We will continue to accelerate the development of HDDs (hard disk drives) in the direction of high density and quietness.
The best performance of a server or PC depends on the performance of the HDD* (hard disk drive). So far, manufacturers have been wondering how to improve their ...
|
|
Platformization of electric vehicles
Set out to develop a shared platform that will control the lifeblood of future electric vehicles
Today, the global automotive industry is ushering in a once-in-a-century wave of technological innovation. Among them, the most representative are the two major technical fields of automobile electrification and autonomous driving, among which the pure electric vehicle driven by the motor ...
|
|
Differences in the functionality of Nidec inverters M700, M701 and M702
Nidec Inverter M700 series high-performance AC/servo drives provide greater machine throughput with enhanced single-axis control and multi-axis network synchronization. Onboard real-time Ethernet (IEEE 1588 V2), advanced motion controllers, and high-speed I/O for position capture enable machine builders to...
|
|
The world's first in the manufacture of brushless motors! For the first time, the six mysterious divisions behind Nidec have been revealed
1. Automotive Business Division: China's leading motor manufacturer in the automotive field
The automotive field is experiencing a big wave represented by "CASE", which can be described as a "once-in-a-century" major change. In particular, the rapid transformation of electric vehicles will drive the demand for drive motors for electric vehicles.
|
|