Common problems with Xinjie touch screen

World electrical safety standards: The requirements are in line with the world's electrical safety standards, such as the CE standard in Europe and the UL standard in the United States. These specifications specify the requirements for electrical safety functions, mechanical safety functions, EMC functions, etc. Machine...

Xinjie PLC conditions are established, why is the corresponding coil not in place? There are two possible reasons for this: (1) The same coil may be used in multiple places to perform the double coil output, and when the double coil is output, the coil on the rear side will operate first. （2） ...

(1) The PLC shall be installed in an environment that meets the requirements of the rules. (2) In order to facilitate ventilation and disassembly, a space of more than 80mm should be left around the PLC. (3) PLC should be a vertical device and not a horizontal device, that is, the device universal is the direction in which the words on the unit panel can be read normally, otherwise the PLC ...

Model introduction of Xinjie PLC 　　XC series Including XC1 (economy), XC2 (basic), XC3 (standard), XC5 (enhanced), XCM (sport), XCC (high-performance) and their corresponding expansion modules, as well as special analog bodies and other special models. XC series PLC can be ...

PLC programmable logic manipulators are the core part of industrial control. According to the number of I/O points of PLC, PLC can be divided into three categories: small PLC, medium and large. It is a digitally operated electronic device designed for industrial production. It uses a programmable memory to store programs that execute user-facing ...

On April 21, with the theme of "I2C More Intelligent Industrial Control", the new product launch and brand promotion conference of Xinjie Intelligent Control was successfully held at Gusu Shangri-La Hotel. At the meeting, in addition to the release of new products, it also discussed the connotation of intelligent industrial control, application scenarios, and the outlook of shopping malls.

1、CPU。 The CPU of the plc is actually the central processing unit, which can carry out the operation and processing of various data, convert various input signals into input registers, and then carry out logical operations, timing, counting, arithmetic operations, data processing and transmission, communication networking and various operations, ...

The grounding policy is nothing more than to avoid disturbance for safety, and the policy of grounding to PLC must not be attached to the disturbance at the power supply and input and output terminals, so the accurate grounding system is one of the primary methods for the PLC control system to resist electromagnetic disturbance. There are floating and direct grounding formations.

Since the advent of the MS6 series B1 and B2 servo motors, they have been widely recognized by customers for their outstanding performance advantages, and their performance in terms of temperature rise, overload ability, overspeed range and protection level is far better than that of MS5 series servo motors. This MS6 series B3 motor released will ...

1. PLC input and output A small PLC controls a complex system with agility, and what can be seen is the upper and lower rows of staggered input and output relay terminals, corresponding lamps and PLC numbers, just like a piece of integrated electricity without dozens of feet. If any ego doesn't look at reason...

Tile programming features The editing and display mode in all Chinese greatly improves the readability of the program; Customizable programming instructions. Not only can the name of the instruction be modified according to the characteristics of the industry, but also the instruction can be added or deleted according to the needs of the equipment; Adopt a procedural editing mode. ...

In order to shorten the early problem period, further extend the random problem period, and postpone the arrival of the wear and tear problem period, we will generally choose the method to take a certain approach at the beginning of the system planning.

Small PLC manufacturers introduce that PLC products have a wide variety of products, and the specifications and performance are also different. The classification of PLCs is usually based on their structure, function and number of I/O points. 1. Classified by input/output points (1) ...

Of course, PLC control is much more reliable than relay control, but if the device does not meet the requirements, it will not work. Therefore, the PLC machine should be installed correctly outside. (1) Pay attention to the environment of the installation The temperature should not be lower than 0°C and above 55°C, for example, not installed by a large stove, and ...

Why can't the touch screen software be installed or used properly? 1. Before the device, please close the antivirus software and system optimization things; 2. After the device is successful, double-click the software convenience icon on the desktop, "Please set the display to be true color" prompt ...

What is a frequency converter? Variable frequency drive (VFD) uses inverter technology and microelectronics to change the operating power frequency of the motor to control the power control unit of the communication motor. The inverter is mainly composed of rectifier (from communication to DC), inverter, inverter (from DC ...

The usual inverter motor (hereinafter referred to as VFD) can only regulate the speed of the communication motor, and it can be open-loop or closed-loop, depending on the control method and VFD. This is the traditional V/F mode. The basic concept of servo is accurate, precise and fast positioning. Frequency conversion is servo ...

1. Hardware purchase At present, there are a large number of PLC products on the market, more and more cost-effective, and the optional fields are getting bigger and bigger. 1. At the beginning of the scale of the system, it should be determined that the system is a single PLC machine.

The primary role of the TP contact screen Supervision: Reflect the internal bit status of the PLC in various ways such as data, curves, graphics, animations, etc., store the numerical value, and then intuitively reflect the process and direction of the industrial control system. Exercise...

Because the current at the input and output ends of the inverter contains high-frequency components, the leakage current formed by the high-frequency components when the inverter is driven is greater than that when the grid power supply is supplied. Because there are many varieties of circuit breakers, in some cases, even the inverter wires and motors ...