Introduction: Xinshida/STEP universal bus servo Ωs-AN1 can cover servo motors with a power of 0.2kW-7.5kW. Support EtherCAT, CANOpen bus communication, communication rate 100Mbps; The frequency response of the current loop is 2kHz, and the frequency response of the speed loop is 1.6kHz, which can realize precise position, speed and torque control, and has excellent control performance and reliable safety strategy. The wiring and operation mode are in line with the usage habits of Asian users.
Features:
The frequency response of the current loop is 2.5kHz, the frequency response of the speed loop is 1.6kHz, and the communication rate is 100Mbps.
It is equipped with a variety of filter reducers to improve the control stability, supports speed curve planning, and can set acceleration and deceleration settings and acceleration and deceleration fillets.
End jitter suppression function, friction compensation function, motor cogging torque compensation function.
It supports a variety of auxiliary function parameter reset, self-learning, joging, fault history query, and fault history clearing
Support the upper computer PC software to set parameters (upload, download, reset, import, export); Waveform monitoring (support automatic saving of waveforms in a period of time before and after the fault in the event of a fault, call, playback, measurement and analysis, linear transformation, FFT analysis of historical waveform data); Support servo position, speed and torque control, start and stop, forward and reverse rotation control, status monitoring, fault diagnosis and other operations;
Support servo drive communication with multiple addresses different;
It is equipped with safety functions such as STO/SS1/SS2/SBC in line with international standards, making it safe and reliable
Product parameters
Power range: 50W - 5kW
Input voltage: 1 single-phase or three-phase 220VAC (-15-+10%), 50-60Hz
Control mode: position control, speed control, torque control, bus control
Encoder type: 2500-line incremental optical encoder (line-saving/non-line-saving), 17bit/20bit/23bit absolute encoder
Communication: EtherCAT, POWERLINK, CANopen
Number of input and output points: IO programmable, support positive and negative logic settings and function repositioning, 5 inputs support 16 function configurations, 3 outputs support 12 function configurations
Monitoring function: Provides 16 status monitoring such as position, speed, current, voltage, input and output
The company respects the enterprise spirit of "practicality, hard work and responsibility", and creates a good corporate environment with integrity, win-win, and business philosophy, and takes a new management model, perfect technology, thoughtful service, and excellent quality as the foundation for survival. We always adhere to: customer first, serve customers attentively, and insist on impressing customers with their own services. Always adhering to the business philosophy of "integrity, win-win", relying on excellent prices, excellent quality, fast delivery and pre-sales consultation and after-sales service to win the trust of our customers.
This article introduces the new Shida/STEP universal bus type servo Ωs-AN1 products, if you are interested in the new Shida/STEP servo, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
Xinshida/STEP servo motor 80SD
Introduction: Xinshida/STEP servo motor 80SD
Product parameters
Rated power: 750W——1000W
Number of pole pairs: 5
Rated torque: 2.39N.m——3.18N.m
Maximum torque: 7.2N.m——9.54N.m
Rated speed: 3000 ...
|
|
Xinshida/STEP 40S2S series servo motor rated speed 3000rpm
Introduction: Xinshida/STEP 40S2S series servo motor, 2500 line incremental/line-saving encoder, optional ** value encoder;
Product parameters
Power range: 50W-100kW
Input voltage: AC - 220V
Rated torque: 0.16N.m——0.3 ...
|
|
Xinshida/STEP servo 60ST rated speed 3000rpm
Introduction: Xinshida/STEP servo 60ST
Product parameters
Power range: 200W-600W
Rated line voltage: 220VAC (-15-+10%), 50-60Hz
Rated line current: 1.2A——3.5A
Rated speed: 3000rpm
...
|
|
Xinshida/STEP universal bus type 380V servo KBS series output power 380V
Introduction: Xinshida/STEP universal bus type 380V servo KBS series powerful internal position mode can plan multi-path continuous operation to achieve rich motion control functions; It can support 32 groups of data planning, and each group of data can set the number of pulses or angles according to the needs, and can ...
|
|
Xinshida/STEP PCI 6-axis motion control card ADT-8960**High pulse frequency 2MHz
Introduction: The ADT-8960 is one of the members of the 12-axis motion control card based on the computer PCI bus, one system can support up to 16 control cards, can control 96 servo/stepper motors, plug and play. Mainly used in multi-axis ...
|
|
Xinshida/STEP universal bus servo iK3 series power range 50W~5kW
Introduction: Xinshida/STEP universal bus servo iK3 series current loop frequency response 2.5kHz, speed loop frequency response 1.6kHz, communication rate 100Mbps. With a variety of filter reducers to improve control stability, support speed curve planning, acceleration and deceleration settings and acceleration and deceleration fillet ...
|
|
Xinshida/STEP servo motor 100B
Introduction: Xinshida/STEP servo motor 100B
Product parameters
Rated power: 1.0kW - 2.0kW
Rated line voltage: 220VAC (-15-+10%), 50-60Hz
Rated line current: 5.0A——9.9A
Rated speed: 3000rp ...
|
|
Xinshida/STEP universal pulse type AC servo drive Ω6
Introduction: Xinshida/STEP universal pulse type AC servo drive Ω6
Features:
Self-tuning, free debugging, saving 90% of equipment debugging time;
Speed loop bandwidth: 3.5kHz;
Current loop refresh rate 1MHz;
Three 16-bit analog command inputs can ...
|
|
Xinshida/STEP universal bus type servo Ωs-AP1 02kW drive power
Introduction: Xinshida/STEP universal bus servo Ωs-AP1 can cover servo motors with a power of 0.2kW - 7.7kW. Pulse control, high 4MPulse/s high-speed pulse input interface (differential signal), up to 500KPulse/s low-speed pulse input interface (optocoupler circuit); ...
|
|
Xinshida/STEP servo motor 60S3S ** high speed 6000rpm
Introduction: Xinshida/STEP servo motor 60S3S
Product parameters
Rated power: 200W——600W
Rated voltage: 220VAC (-15-+10%), 50-60HZ
Rated torque: 0.64N.m——1.91N.m
**Large torque: 1.92 ...
|
|
Xinshida/STEP servo drive QXL I/O10 in and out of 9
Introduction: Xinshida/STEP servo drive QXL integrates the current world's cutting-edge servo control technology, and its excellent driving performance has reached the highest level. Excellent extensibility, fast response, stable positioning, vibration suppression, automatic parameter design, programmability, convenient operation, saturation limit improvement...
|
|
The AS610 inverter is rated at ≥ 0.93
Introduction: Xinshida/STEP inverter AS610
Features:
High reliability design
Reliable thermal design
High seismic resistance
High degree of protection
Ultra-low noise operation design
It has a DC input anti-reverse circuit design
Advanced...
|
|
Xinshida/STEP servo motor 110ST rated speed 2000rpm
Introduction: Xinshida/STEP servo motor 110ST servo motor, AC servo motor, permanent magnet AC servo motor
Product parameters
Power range: 0.88kW - 1.6kW
Rated line voltage: 220VAC (-15-+10%), 50-60Hz
Rated...
|
|
Xinshida/STEP servo motor 80ST rated line voltage 220V
Introduction: Xinshida/STEP servo motor 80ST
Product parameters
Power range: 0.4KW-1KW
Rated line voltage: 220V
Rated line current: 2A——3A
Rated speed: 2000RPM-3000RPM
Rated torque: 1.27N ...
|
|
Xinshida/STEP servo motor 80E encoder line number 2500 lines
Introduction: Xinshida/STEP servo motor 80E
Product parameters
Rated power: 0.4kW——1kW
Rated line voltage: 220VAC (-15-+10%), 50-60Hz
Rated line current: 2A-4.4A
Rated speed: 2000rpm ...
|
|
Xinshida/STEP servo motor 60SS/60SD rated speed 3000rpm
Introduction: Xinshida/STEP servo motor 60SS/60SD general-purpose S series servo motor servo motor, AC servo motor, permanent magnet AC servo motor
Product parameters
Rated power: 200W——400W
Number of pole pairs: 5
Rated torque: 0.64N.m— ...
|
|
Xinshida/STEP servo motor 130B rated speed 1500rpm
Introduction: Xinshida/STEP servo motor 130B
Product parameters
Rated power: 0.85kW - 1.8kW
Rated line voltage: 220VAC (-15-+10%), 50-60Hz
Rated line current: 6.9A——15A
Rated speed: 1500r ...
|
|
Xinshida/STEP servo motor 130ST
Introduction: Xinshida/STEP servo motor 130ST
Product parameters
Power range: 1.3kW - 2.4kW
Input voltage: 220VAC (-15-+10%), 50-60Hz
Rated current: 7.0A——12A
Rated torque: 4.2N.m— ...
|
|
Xinshida/STEP universal pulse servo G3 series Modbus protocol
Introduction: Xinshida/STEP universal pulse servo G3 series high-precision position clamping function, after the driver detects that the specified position has been reached, the command is output through the IO port. The infinite operation** function allows the encoder to clear the number of turns by a pre-set upper limit.
Give birth...
|
|
Xinshida/STEP servo motor 180ST
Introduction: Xinshida/STEP servo motor 180ST
Product parameters
Power range: 2.7kW - 4.5kW
Input voltage: single-phase/three-phase 220VAC/380VAC (-15-+10%), 50-60Hz
Rated line current: 10.5A——16A (220V A ...
|
|