Introduction: The new STEP servo drive QXL integrates the current world's cutting-edge servo control technology, and its excellent driving performance has reached the international level. It is widely used in dispensing, machine tools, robots, packaging, printing, cutting, patching, horizontal weaving, planting, spring, engraving, welding and other fields.
Features:
compatibility
Support linear motors, servo motors, voice coil motors, DDR, DC motors, coreless, etc
High-speed, high-response, stable positioning
Response frequency: 2.89kHz 24-bit increment, absolute encoder 0-2ms setting time
Vibration suppression
6 notch filters, multi-frequency rejection, low-frequency rejection
Bus communication
RS485Modbus/EthterCAT
Built-in PLC function
I/O 10 in and 9 out
Other features
Self-tuning, full closed-loop, electronic convex gear, gantry synchronization, pitch compensation, fault self-diagnosis, capture comparison, etc
This article introduces the QXL products, if you are interested in the new STEP servo drive, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business
|
More on that
|
Xinshida/STEP multi-axis servo K1AD series with a power of 0.75kW
Introduction: Xinshida/STEP multi-axis servo K1AD series mechanical resonance frequency analysis, equipped with two sets of notch filters, adjustable frequency (50-5000Hz) and notch depth, effectively overcome low-frequency resonance and vibration at the end of the machine, can set the vibration frequency (1-100Hz) and vibration damping.
...
|
|
Xinshida/STEP universal pulse servo G3 series Modbus protocol
Introduction: Xinshida/STEP universal pulse servo G3 series high-precision position clamping function, after the driver detects that the specified position has been reached, the command is output through the IO port. The infinite operation absolute function allows the encoder to clear the number of turns by a pre-set upper limit.
Give birth...
|
|
Xinshida/STEP servo motor 80E encoder line number 2500 lines
Introduction: Xinshida/STEP servo motor 80E
Product parameters
Rated power: 0.4kW——1kW
Rated line voltage: 220VAC (-15-+10%), 50-60Hz
Rated line current: 2A-4.4A
Rated speed: 2000rpm ...
|
|
Xinshida/STEP servo motor 60E
Introduction: Xinshida/STEP servo motor 60E
Product parameters
Supply voltage: 220VAC (-15-+10%), 50-60Hz
Output power: 200W——600W
Rated line current: 1.2A——3.5A
Rated speed: 3000rpm
...
|
|
Xinshida/STEP servo 60ST rated speed 3000rpm
Introduction: Xinshida/STEP servo 60ST
Product parameters
Power range: 200W-600W
Rated line voltage: 220VAC (-15-+10%), 50-60Hz
Rated line current: 1.2A——3.5A
Rated speed: 3000rpm
...
|
|
Xinshida/STEP universal bus type servo Ωs-EN1 position control cycle 100μs
Introduction: Xinshida/STEP universal bus servo Ωs-EN1 can cover servo motors with a power of 0.2kW-22kW. Support EtherCAT, PowerLink, CANOpen bus communication, communication rate 100Mbps; Precise position, speed, torque control and superior control
|
|
Xinshida/STEP universal servo k2 series 2 inputs
Introduction: Xinshida/STEP universal bus servo Ωs-AN1 can cover servo motors with a power of 0.2kW-7.5kW. Support EtherCAT, CANOpen bus communication, communication rate 100Mbps; The frequency response of the current loop is 2kHz, and the frequency response of the velocity loop is 1.6kHz.
|
|
Xinshida/STEP universal bus type servo iK2 series voltage 220VAC
Introduction: The powerful internal position mode of the new Shida/STEP universal bus servo iK2 series can plan multi-path continuous operation to achieve rich motion control functions; Support up to 32 groups of data planning, each group of data can be set according to the number of pulses or angles, and the amount can be set ...
|
|
Xinshida/STEP servo motor 40ST rated speed 3000rpm
Introduction: Xinshida/STEP servo motor 40ST
Product parameters
Power range: 50W-100W
Quota line voltage: DC 48V/AC 220V
Rated line current: 48V 1.1A-2.5A / 220V 0.4A-0.6A
Rated speed: 300 ...
|
|
Xinshida/STEP servo motor 130ST series rated speed 1500rpm
Introduction: Xinshida/STEP servo motor 130ST series, servo motor, AC servo motor, permanent magnet AC servo motor
Product parameters
Power range: 1.8kW - 2.3kW
Input voltage: 220VAC (-15-+10%), 50-60Hz
Forehead...
|
|
Xinshida/STEP universal bus type 380V servo KBS series output power 380V
Introduction: Xinshida/STEP universal bus type 380V servo KBS series powerful internal position mode can plan multi-path continuous operation to achieve rich motion control functions; It can support 32 groups of data planning, and each group of data can set the number of pulses or angles according to the needs, and can ...
|
|
Xinshida/STEP servo motor 80ST rated line voltage 220V
Introduction: Xinshida/STEP servo motor 80ST
Product parameters
Power range: 0.4KW-1KW
Rated line voltage: 220V
Rated line current: 2A——3A
Rated speed: 2000RPM-3000RPM
Rated torque: 1.27N ...
|
|
Xinshida/STEP servo motor 130ST 2000rpm
Introduction: Xinshida/STEP servo motor 130ST incremental/optional absolute, permanent magnet AC servo motor
Product parameters
Power range: 1.8kW - 2.8kW
Input voltage: 220VAC (-15-+10%), 50-60Hz
Rated current: 9 ...
|
|
Xinshida/STEP servo motor 130S3H rated speed 1500rpm
Introduction: Xinshida/STEP servo motor 130S3H, servo motor, AC servo motor, permanent magnet AC servo motor
Product parameters
Rated power: 1.3kW - 2.3kW
Rated voltage: 220VAC (-15-+10%), 50-60Hz
Rated torque: ...
|
|
Xinshida/STEP servo 80SS series rated current 4A-4.9A
Introduction: Xinshida/STEP servo 80SS series, rated power: 750W-1000W
Product parameters
Rated power: 750W——1000W
Number of pole pairs: 5
Rated torque: 2.39N.m——3.18N.m
Maximum torque: 7.2N.m——9. ...
|
|
Xinshida/STEP servo 110ST
Introduction: Xinshida/STEP servo 110ST
Product parameters
Power range: 0.6kW - 1.8kW
Input voltage: 220V
Rated line current: 2.5A——6.0A
Rated speed: 2000RPM-3000RPM
Rated torque: 2N.m ...
|
|
Xinshida/STEP multi-axis servo KAD series power supply voltage 220VAC
Introduction: The powerful internal position mode of the new Shida/STEP multi-axis servo KAD series can plan multi-path continuous operation to achieve rich motion control functions; It can support 32 groups of data planning, and each group of data can set the number of pulses or angles according to the needs, and can set the internal ...
|
|
Xinshida/STEP servo motor 180ST
Introduction: Xinshida/STEP servo motor 180ST
Product parameters
Power range: 2.7kW - 4.5kW
Input voltage: single-phase/three-phase 220VAC/380VAC (-15-+10%), 50-60Hz
Rated line current: 10.5A——16A (220V A ...
|
|
Xinshida/STEP servo motor 130SD rated power 1kW-3kW
Introduction: Xinshida/STEP servo motor 130SD servo motor, AC servo motor, permanent magnet AC servo motor
Product parameters
Rated power: 1kW-3kW
Number of pole pairs: 5
Rated torque: 4.77N.m——14.3N.m
Maximum torque: ...
|
|
Xinshida/STEP universal pulse type servo KAS series 8-channel input
Introduction: Xinshida/STEP universal pulse servo KAS series Powerful internal position mode can plan multi-path continuous operation to achieve rich motion control functions; It can support 32 groups of data planning, and each group of data can set the number of pulses or angles according to the needs, and can be set ...
|
|
Contact
working hours
