Xinshida/STEP servo motor 60S3S with a maximum speed of 6000rpm

Introduction: Xinshida/STEP 40S2S series servo motor, 2500 line incremental/wire-saving encoder, optional absolute encoder; Product parameters Power range: 50W-100kW Input voltage: AC - 220V Rated torque: 0.16N.m——0.3 ...

Introduction: Xinshida/STEP 110B servo motor, AC servo motor, permanent magnet AC servo motor Product parameters Rated power: 0.4kW - 1.2kW Rated line voltage: 220VAC (-15-+10%), 50-60Hz Rated line current: 2. ...

Introduction: Xinshida/STEP universal pulse servo G series adopts new digital signal processor (DSP) and intelligent power module (IPM), advanced control algorithm, to achieve high-precision control of permanent magnet synchronous motor, intelligent PID control algorithm and PDFF controller combined, improve the position and ...

Introduction: Xinshida/STEP servo motor 80SD Product parameters Rated power: 750W——1000W Number of pole pairs: 5 Rated torque: 2.39N.m——3.18N.m Maximum torque: 7.2N.m——9.54N.m Rated speed: 3000 ...

Introduction: Xinshida/STEP universal servo K1 series Features: Powerful internal position mode allows for planning multi-path continuous operation for rich motion control functions; Support up to 32 groups of data planning, each group of data can be set according to the needs of 2, find the number of pulses or ...

Introduction: Xinshida/STEP universal pulse servo KAS series Powerful internal position mode can plan multi-path continuous operation to achieve rich motion control functions; It can support 32 groups of data planning, and each group of data can set the number of pulses or angles according to the needs, and can be set ...

Introduction: Xinshida/STEP inverter AS610 Features: High reliability design Reliable thermal design High seismic resistance High degree of protection Ultra-low noise operation design It has a DC input anti-reverse circuit design Advanced...

Introduction: Xinshida/STEP servo 110ST Product parameters Power range: 0.6kW - 1.8kW Input voltage: 220V Rated line current: 2.5A——6.0A Rated speed: 2000RPM-3000RPM Rated torque: 2N.m ...

Introduction: Xinshida/STEP high-order pulse servo drive K5 series uses advanced motor control algorithm to achieve faster system response, current loop frequency response of 2.5kHz, speed loop frequency response of 1.6kHz, communication rate of 100Mbps. In the actual operation state, the adaptive filter ...

Introduction: Xinshida/STEP high-end bus servo E series end jitter suppression function, friction compensation function, motor cogging torque compensation function, with self-tuning function and with a variety of vibration damping filters. Support the host PC software for parameter setting (upload, download, reset, guide...

Introduction: Xinshida/STEP Motion Controller AMC1600C-A06, special aircraft motion controller; Based on the CoDeSys platform, it fully supports the IEC61131-3 standard programming language; Support configuration programming, support EtherCAT, CANOpen, EthernetIP and other industrial fieldbus protocols ...

Introduction: Xinshida/STEP servo motor 180ST Product parameters Power range: 2.7kW - 4.5kW Input voltage: single-phase/three-phase 220VAC/380VAC (-15-+10%), 50-60Hz Rated line current: 10.5A——16A (220V A ...

Introduction: Xinshida/STEP servo motor 40ST Product parameters Power range: 50W-100W Quota line voltage: DC 48V/AC 220V Rated line current: 48V 1.1A-2.5A / 220V 0.4A-0.6A Rated speed: 300 ...

Introduction: Zhongweixing QXE series bus type high-performance servo drive, integrated with the world's cutting-edge servo control technology, its excellent driving performance has reached the international leading level. Excellent scalability, fast response, precise positioning, vibration suppression, automatic parameter design, programmability, operation ...

Introduction: Xinshida/STEP servo motor 110ST Product parameters Power range: 1.3kW - 1.7kW Rated line voltage: 220VAC (-15-+10%), 50-60Hz Rated line current: 6.5A——9.5A Rated speed: 2500 ...

Introduction: The excellent hierarchical structure of the new Shida/STEP network-based bus servo EM-C series enables the servo software equipped with MDP to run on different CPU hardware platforms, forming a single CPU control 1-8 axis servo products and the integration of bus technology; MDP is convenient for users to ...

Introduction: Xinshida/STEP servo 80SS series, rated power: 750W-1000W Product parameters Rated power: 750W——1000W Number of pole pairs: 5 Rated torque: 2.39N.m——3.18N.m Maximum torque: 7.2N.m——9. ...

Introduction: Xinshida/STEP servo motor 130S3H, servo motor, AC servo motor, permanent magnet AC servo motor Product parameters Rated power: 1.3kW - 2.3kW Rated voltage: 220VAC (-15-+10%), 50-60Hz Rated torque: ...

Introduction: Xinshida/STEP servo motor 130ST incremental/optional absolute, permanent magnet AC servo motor Product parameters Power range: 1.8kW - 2.8kW Input voltage: 220VAC (-15-+10%), 50-60Hz Rated current: 9 ...

Introduction: Xinshida/STEP universal bus type 380V servo KBS series powerful internal position mode can plan multi-path continuous operation to achieve rich motion control functions; It can support 32 groups of data planning, and each group of data can set the number of pulses or angles according to the needs, and can ...