Introduction: Xinshida/STEP universal bus type 380V servo KBS series powerful internal position mode can plan multi-path continuous operation to achieve rich motion control functions; It can support 32 sets of data planning, each group of data can set the number of pulses or angle according to the requirements, and the speed, acceleration, deceleration and emergency deceleration of the internal position mode can be set
Features:
Mechanical resonance frequency analysis, equipped with two sets of notch filters, adjustable frequency (50-5000Hz) and notch depth, effectively overcome low-frequency resonance and vibration at the end of the machine, vibration frequency (1-100Hz) and vibration damping can be set
The friction torque compensation function can reduce the influence of static friction during mechanical commutation and improve the command following performance of low-speed operation
Debugging software support, can be mechanical characteristics analysis, parameter setting, monitoring and other functions, intuitive and simple operation.
Product parameters
Specifications:
Supply voltage: single-phase or three-phase 220VAC (-15-+10%), 50-60Hz
Output: 380V (2kW, 3.5kW, 5kW, 7.5kW)
Encoders: 2500-line incremental/wire-saving encoders, 17bit/20bit/23bit absolute encoders
Digital IO signal: 8 channel input and 6 channel output can be set functionally
Analog signal: 2 inputs
Communication mode: RS232, standard MODBUS protocol, CANOPEN bus, iK series supports MII protocol
Monitoring function: Provides 16 status monitoring such as position, speed, current, voltage, input and output
The company respects the enterprise spirit of "practicality, hard work and responsibility", and creates a good corporate environment with integrity, win-win, and business philosophy, and takes a new management model, perfect technology, thoughtful service, and excellent quality as the foundation for survival. We always adhere to: customer first, serve customers attentively, and insist on impressing customers with their own services. Always adhering to the business philosophy of "integrity, win-win", relying on excellent prices, excellent quality, fast delivery and pre-sales consultation and after-sales service to win the trust of our customers.
This article introduces the new Shida/STEP universal bus type 380V servo KBS series products, if you are interested in the new Shida/STEP servo, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
The voltage of the iK2 series of universal bus type is 220VAC
Introduction: The powerful internal position mode of the iK2 series of universal bus servo can be planned for multi-path continuous operation to achieve rich motion control functions; **Support more than 32 sets of data planning, each set of data can set the number of pulses or angles according to needs, and can set the quantity...
|
|
The power supply voltage of the STEP multi-axis servo KAD series is 220VAC
Introduction: The powerful internal position mode of the STEP multi-axis servo KAD series can plan multi-path continuous operation to achieve rich motion control functions; It can support 32 sets of data planning, and each set of data can be set according to the needs of the number of pulses or angles, and can be set internal ...
|
|
The rated efficiency of the AS610 is ≥ 0.93
Introduction: New Time/STEP Inverter AS610
Product features:
High reliability design
Reliable thermal design
High seismic resistance
High degree of protection
Ultra-low noise operation design
It has a DC input anti-reverse circuit design
**Target...
|
|
New Time/STEP servo motor 60SS/60SD rated speed 3000rpm
Introduction: New Time/STEP servo motor 60SS/60SD universal S series servo motor servo motor, AC servo motor, permanent magnet AC servo motor
Specifications
Rated power: 200W-400W
Pole logarithms: 5
Rated torque: 0.64N.m— ...
|
|
Xinshida/STEP servo motor 180ST
Introduction: Xinshida/STEP servo motor 180ST
Product parameters
Power range: 2.7kW - 4.5kW
Input voltage: single-phase/three-phase 220VAC/380VAC (-15-+10%), 50-60Hz
Rated line current: 10.5A——16A (220V A ...
|
|
The high-performance servo drive QXE has a built-in PLC
Introduction: Zhongweixing QXE series bus type high-performance servo drives integrate the world's cutting-edge servo control technology, and its excellent drive performance has reached the highest level. Excellent expansion performance, fast response, positioning, vibration suppression, automatic parameter design, programmable, operation ...
|
|
Xinshida/STEP DDR motor servo drive QXR
Introduction:Xinshida/STEP DDR motor servo driver QXR Xinshida QXR series high-performance pulse DDR motor servo driver integrates the current world's cutting-edge servo control technology, and its excellent driving performance has reached the international leading level.
Features:
Scalable performance ...
|
|
Xinshida/STEP high-order pulse servo drive K5 series position control mode
Introduction: Xinshida/STEP high-order pulse servo drive K5 series uses advanced motor control algorithm to achieve faster system response, current loop frequency response of 2.5kHz, speed loop frequency response of 1.6kHz, communication rate of 100Mbps. In the actual operation state, the adaptive filter ...
|
|
New Time Reach/STEP universal pulse type AC servo drive Ω6
Introduction: New Time/STEP universal pulse type AC servo drive Ω6
Product features:
self-tuning, no debugging saves 90% of equipment debugging time;
Speed loop bandwidth 3.5kHz;
Current loop refresh frequency 1MHz;
Three 16-bit analog command inputs can ...
|
|
New Time/STEP servo motor 60E
Introduction: New Time/STEP servo motor 60E
Specifications
Supply voltage: 220VAC (-15-+10%), 50-60Hz
Output power: 200W-600W
Rated Line Current: 1.2A-3.5A
Rated speed: 3000rpm
...
|
|
The communication rate of the servo Ωs-AN1 of the universal bus type of STEP is 100Mbps
Introduction: The servo Ωs-AN1 can cover servo motors with a power of 0.2kW-7.5kW. Support EtherCAT and CANOpen bus communication, communication rate 100Mbps; The current loop frequency response is 2kHz, and the speed loop frequency response is 1.6kHz;
|
|
Xinshida/STEP servo motor 110B rated speed 2000rpm
Introduction: Xinshida/STEP 110B servo motor, AC servo motor, permanent magnet AC servo motor
Product parameters
Rated power: 0.4kW - 1.2kW
Rated line voltage: 220VAC (-15-+10%), 50-60Hz
Rated line current: 2. ...
|
|
New Time/STEP universal bus type servo iKAS series 6-channel output
Introduction: Powerful internal position mode can plan multi-path continuous operation to achieve rich motion control functions; It can support 32 sets of data planning, each group of data can be set according to the number of pulses or angles, and the speed, acceleration, and deceleration of the internal position mode can be set.
|
|
New Time/STEP servo motor 130SD rated power 1kW-3kW
Introduction: New Time/STEP Servo Motor 130SD Servo Motor, AC Servo Motor, Permanent Magnet AC Servo Motor
Specifications
Rated power: 1kW-3kW
Pole logarithms: 5
Rated torque: 4.77N.m-14.3N.m
** High torque: ...
|
|
Xinshida/STEP PCI 6-axis motion control card ADT-8960 has a maximum pulse frequency of 2MHz
Introduction: The ADT-8960 is one of the members of the 12-axis motion control card based on the computer PCI bus, one system can support up to 16 control cards, can control 96 servo/stepper motors, plug and play. Mainly used in multi-axis ...
|
|
New time/STEP servo motor 220ST encoder number 2500 lines
Introduction: New Time/STEP servo motor 220ST rated torque: 67N.m-95.5N.m
Specifications
Power range: 7kw-11kw
Quota line voltage: 220VAC (-15-+10%), 50-60Hz
Rated Line Current: 31.3A— ...
|
|
Xinshida/STEP universal pulse servo G series 2 inputs
Introduction: Xinshida/STEP universal pulse type servo G series
Features:
The new digital signal processor (DSP) and intelligent power module (IPM) and advanced control algorithm are used to realize the high-precision control of the permanent magnet synchronous motor;
Intelligent PID Control Algorithm and PD...
|
|
New Time/STEP 40S2S series servo motor rated speed 3000rpm
Introduction: New Time/STEP 40S2S series servo motor, 2500 line incremental/line-saving encoder, optional ** value encoder;
Specifications
Power range: 50W-100kW
Input Voltage: AC – 220V
Rated torque: 0.16N.m-0.3 ...
|
|
Xinshida/STEP universal servo K1 series 2-way input
Introduction: Xinshida/STEP universal servo K1 series
Features:
Powerful internal position mode allows for planning multi-path continuous operation for rich motion control functions; Support up to 32 groups of data planning, each group of data can be set according to the needs of 2, find the number of pulses or ...
|
|
New Time/STEP servo motor 130ST 2000rpm
Introduction: New Time/STEP servo motor 130ST incremental/optional** value, permanent magnet AC servo motor
Specifications
Power range: 1.8kW – 2.8kW
Input Voltage: 220VAC (-15-+10%), 50-60Hz
Rated current: 9 ...
|
|
Contact
working hours
