Xinshida/STEP servo motor 60SS/60SD rated speed 3000rpm

Introduction: Xinshida/STEP universal bus servo Ωs-EN2, Ωs-EN1 series servo drive can cover servo motors with a power of 2kW-22kW. Support EtherCAT bus communication, communication rate 100Mbps; It can realize precise position, speed, torque control, and has excellent control ...

Introduction: Xinshida/STEP servo motor 60ST 　　Product parameters Power range: 200W-600W Rated line voltage: 220VAC (-15-+10%), 50-60Hz Rated line current: 1.2A——3.5A Rated speed: 3000rpm ...

Introduction: Xinshida/STEP servo motor 60S3S Product parameters Rated power: 200W——600W Rated voltage: 220VAC (-15-+10%), 50-60HZ Rated torque: 0.64N.m——1.91N.m Maximum torque: 1.92 ...

Introduction: Xinshida/STEP servo motor 150ST 　　Product parameters Power range: 3.0kW - 5.5kW Input voltage: 220V Rated line current: 14A-27A Rated speed: 2000PRM-2500RPM Rated torque: 15N ...

Introduction: Xinshida/STEP universal pulse servo G2 adopts new digital signal processor (DSP) and intelligent power module (IPM), advanced control algorithm to achieve high-precision control of permanent magnet synchronous motor; Features: Adoption of a new digital signal processor (DS ...

Introduction: Xinshida/STEP universal bus servo iK3 series current loop frequency response 2.5kHz, speed loop frequency response 1.6kHz, communication rate 100Mbps. With a variety of filter reducers to improve control stability, support speed curve planning, acceleration and deceleration settings and acceleration and deceleration fillet ...

Introduction: The new STEP servo drive QXL integrates the current world's cutting-edge servo control technology, and its excellent driving performance has reached the international level. Excellent extensibility, fast response, stable positioning, vibration suppression, automatic parameter design, programmability, convenient operation, saturation limit improvement...

Introduction: Powerful internal position mode can plan multi-path continuous operation to achieve rich motion control functions; It can support 32 sets of data planning, each group of data can be set according to the number of pulses or angles, and the speed, acceleration, and deceleration of the internal position mode can be set.

Introduction: The powerful internal position mode of the new Shida/STEP universal bus servo iK2 series can plan multi-path continuous operation to achieve rich motion control functions; Support up to 32 groups of data planning, each group of data can be set according to the number of pulses or angles, and the amount can be set ...

Introduction: Xinshida/STEP multi-axis servo Ωm-N1 is a multi-axis product launched by Sigriner, including rectifier unit (AC200V), three-axis integrated and four-axis integrated drive unit (DC300V). The rectifier unit and drive unit can be flexibly configured. The system adopts EtherCAT bus communication, supporting ...

Introduction: Xinshida/STEP servo motor 180ST Product parameters Power range: 2.7kW - 4.5kW Input voltage: single-phase/three-phase 220VAC/380VAC (-15-+10%), 50-60Hz Rated line current: 10.5A——16A (220V A ...

Introduction: Xinshida/STEP servo motor 220ST rated torque: 67N.m——95.5N.m Product parameters Power range: 7kw - 11kw Quota line voltage: 220VAC (-15-+10%), 50-60Hz Rated line current: 31.3A— ...

Introduction: Xinshida/STEP servo motor 80S3S servo motor, AC servo motor, permanent magnet AC servo motor Product parameters Rated power: 750W——1000W Rated voltage: 220VAC (-15-+10%), 50-60Hz Rated torque ...

Introduction: Xinshida/STEP universal pulse type AC servo drive Ω6 Features: Self-tuning, free debugging, saving 90% of equipment debugging time; Speed loop bandwidth: 3.5kHz; Current loop refresh rate 1MHz; Three 16-bit analog command inputs can ...

Introduction: Xinshida/STEP servo 110ST Product parameters Power range: 0.6kW - 1.8kW Input voltage: 220V Rated line current: 2.5A——6.0A Rated speed: 2000RPM-3000RPM Rated torque: 2N.m ...

Introduction: Xinshida/STEP universal pulse servo Ωs-AP2 provides customers with a variety of Calling zero return modes to adapt to the zero return needs of different sites, and also provides 64 points of I/O point control function, which is suitable for customers to pass through different I/O without providing pulse control.

Introduction: Xinshida/STEP universal bus servo Ωs-AN1 can cover servo motors with a power of 0.2kW-7.5kW. Support EtherCAT, CANOpen bus communication, communication rate 100Mbps; The frequency response of the current loop is 2kHz, and the frequency response of the velocity loop is 1.6kHz.

Introduction:Xinshida/STEP high-performance servo drive QXM has excellent expansion performance, fast response, stable positioning, vibration suppression, automatic parameter design, programmability, convenient operation, saturation limit speed-up, electronic cam, gantry synchronization, capture comparison and other functional characteristics, which are widely used in point ...

Introduction: Xinshida/STEP universal pulse servo G2 series adopts new digital signal processor (DSP) and intelligent power module (IPM), advanced control algorithm, to achieve high-precision control of permanent magnet synchronous motor; The combination of the intelligent PID control algorithm and the PDFF controller improves the position ...

Introduction: The QX-B2 is a compact all-digital intelligent servo drive based on the latest DSP technology, which is developed with advanced digital signal processing technology and has high overall efficiency. Not only can traditional high-performance Space Vector (FOC) algorithms be used, ...