Xinshida/STEP servo motor 180ST

Introduction: The excellent hierarchical structure of the new Shida/STEP network-based bus servo EM-C series enables the servo software equipped with MDP to run on different CPU hardware platforms, forming a single CPU control 1-8 axis servo products and the integration of bus technology; MDP is convenient for users to ...

Introduction: Xinshida/STEP integrated all-in-one servo SS series adopts 32768 high-resolution encoder, the position control is more accurate, within 3000rpm, and the rated torque output can be guaranteed at any speed. Features: Compared with ordinary AC servo: Below 36V ...

Introduction: Xinshida/STEP universal pulse servo G3 series high-precision position clamping function, after the driver detects that the specified position has been reached, the command is output through the IO port. The infinite operation absolute function allows the encoder to clear the number of turns by a pre-set upper limit. Give birth...

Introduction: Xinshida/STEP servo motor 100B 　　Product parameters Rated power: 1.0kW - 2.0kW Rated line voltage: 220VAC (-15-+10%), 50-60Hz Rated line current: 5.0A——9.9A Rated speed: 3000rp ...

Introduction: Xinshida/STEP servo motor 180ST Product parameters Power range: 2.7kW - 4.5kW Input voltage: single-phase/three-phase 220VAC/380VAC (-15-+10%), 50-60Hz Rated line current: 10.5A——16A (220V A ...

Introduction: Xinshida/STEP 110B servo motor, AC servo motor, permanent magnet AC servo motor Product parameters Rated power: 0.4kW - 1.2kW Rated line voltage: 220VAC (-15-+10%), 50-60Hz Rated line current: 2. ...

Introduction: Xinshida/STEP universal pulse servo Ωs-AP2 provides customers with a variety of Calling zero return modes to adapt to the zero return needs of different sites, and also provides 64 points of I/O point control function, which is suitable for customers to pass through different I/O without providing pulse control.

Introduction: Xinshida/STEP servo motor 40ST Product parameters Power range: 50W-100W Quota line voltage: DC 48V/AC 220V Rated line current: 48V 1.1A-2.5A / 220V 0.4A-0.6A Rated speed: 300 ...

Introduction: Xinshida/STEP universal bus servo Ωs-EN1 can cover servo motors with a power of 0.2kW-22kW. Support EtherCAT, PowerLink, CANOpen bus communication, communication rate 100Mbps; Precise position, speed, torque control and superior control

Introduction: Xinshida/STEP servo motor 130ST incremental/optional absolute, permanent magnet AC servo motor Product parameters Power range: 1.8kW - 2.8kW Input voltage: 220VAC (-15-+10%), 50-60Hz Rated current: 9 ...

Introduction: Xinshida/STEP servo motor 80SD Product parameters Rated power: 750W——1000W Number of pole pairs: 5 Rated torque: 2.39N.m——3.18N.m Maximum torque: 7.2N.m——9.54N.m Rated speed: 3000 ...

Introduction: Xinshida/STEP servo 80SS series, rated power: 750W-1000W Product parameters Rated power: 750W——1000W Number of pole pairs: 5 Rated torque: 2.39N.m——3.18N.m Maximum torque: 7.2N.m——9. ...

Introduction: Xinshida/STEP servo motor 80ST Product parameters Power range: 0.4KW-1KW Rated line voltage: 220V Rated line current: 2A——3A Rated speed: 2000RPM-3000RPM Rated torque: 1.27N ...

Introduction: Xinshida/STEP universal pulse type servo G series Features: The new digital signal processor (DSP) and intelligent power module (IPM) and advanced control algorithm are used to realize the high-precision control of the permanent magnet synchronous motor; Intelligent PID Control Algorithm and PD...

Introduction:Xinshida/STEP high-performance servo drive QXM has excellent expansion performance, fast response, stable positioning, vibration suppression, automatic parameter design, programmability, convenient operation, saturation limit speed-up, electronic cam, gantry synchronization, capture comparison and other functional characteristics, which are widely used in point ...

Introduction: Xinshida/STEP universal bus servo Ωs-AP1 can cover servo motors with a power of 0.2kW - 7.7kW. Pulse control, up to 4MPulse/s high-speed pulse input interface (differential signal), up to 500KPulse/s low-speed pulse input interface (optocoupler circuit); ...

Introduction: Xinshida/STEP universal pulse servo G2 series adopts new digital signal processor (DSP) and intelligent power module (IPM), advanced control algorithm, to achieve high-precision control of permanent magnet synchronous motor; The combination of the intelligent PID control algorithm and the PDFF controller improves the position ...

Introduction: Xinshida/STEP servo motor 80E Product parameters Rated power: 0.4kW——1kW Rated line voltage: 220VAC (-15-+10%), 50-60Hz Rated line current: 2A-4.4A Rated speed: 2000rpm ...

Introduction:Xinshida/STEP DDR motor servo driver QXR Xinshida QXR series high-performance pulse DDR motor servo driver integrates the current world's cutting-edge servo control technology, and its excellent driving performance has reached the international leading level. Features: Scalable performance ...

Introduction: Xinshida/STEP universal servo K1 series Features: Powerful internal position mode allows for planning multi-path continuous operation for rich motion control functions; Support up to 32 groups of data planning, each group of data can be set according to the needs of 2, find the number of pulses or ...