Introduction: Xinshida/STEP universal bus servo Ωs-AP1 can cover servo motors with a power of 0.2kW - 7.7kW. Pulse control, up to 4MPulse/s high-speed pulse input interface (differential signal), up to 500KPulse/s low-speed pulse input interface (optocoupler circuit); Using FPGA hardware current loop technology, the current loop response is increased to 2.5kHz, and the speed loop frequency response is 1.6kHz, which can realize accurate position, speed and torque control, and use advanced motor control algorithms to achieve faster system response.
Features:
The operation mode and wiring layout are in line with the habits of Asian users.
It has a control panel consisting of a 6-position, 7-segment LED digital tube and 5 buttons, as well as a connector with individual loading and unloading mode.
The window filtering algorithm improves the anti-interference ability of pulse commands
According to the maximum frequency of pulse command, the sampling window is determined, and the filtering effect is good, which effectively improves the positioning accuracy.
External interference resistance algorithm makes the control both rigid and flexible
Past problems: when the rigidity is set to be small, the position setting speed is slow, and when the rigidity is large, the position setting is too hard and easy to vibrate.
Introducing a new algorithm: fast position tuning and smooth control
Product parameters
project | | | | | | | | | | Continuous output current Arms | | | | | | | | Maximum output current Arms | | | | | | | | Main circuit power supply | Single/three-phase AC220V, -15%~+10%, 50/60Hz | Three-phase AC220V, -15%~+10%, 50/60Hz | Control circuit power supply | Single-phase AC220V, -15%~+10%, 50/60Hz |
project | | | | | | | | Continuous output current Arms | | | | | | Maximum output current Arms | | | | | | Main circuit power supply | Three-phase AC380V, -15%~+10%, 50/60Hz |
We will provide customers with high-quality products and satisfactory services with honest and trustworthy, convenient and fast business methods and strict management.
This article introduces the new Shida/STEP universal bus type servo Ωs-AP1 products, if you are interested in the new Shida/STEP servo, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
Xinshida/STEP universal pulse type servo KAS series 8-channel input
Introduction: Xinshida/STEP universal pulse servo KAS series Powerful internal position mode can plan multi-path continuous operation to achieve rich motion control functions; It can support 32 groups of data planning, and each group of data can set the number of pulses or angles according to the needs, and can be set ...
|
|
Xinshida/STEP universal pulse servo G series 2 inputs
Introduction: Xinshida/STEP universal pulse type servo G series
Features:
The new digital signal processor (DSP) and intelligent power module (IPM) and advanced control algorithm are used to realize the high-precision control of the permanent magnet synchronous motor;
Intelligent PID Control Algorithm and PD...
|
|
Xinshida/STEP servo motor 130B rated speed 1500rpm
Introduction: Xinshida/STEP servo motor 130B
Product parameters
Rated power: 0.85kW - 1.8kW
Rated line voltage: 220VAC (-15-+10%), 50-60Hz
Rated line current: 6.9A——15A
Rated speed: 1500r ...
|
|
Xinshida/STEP universal bus type servo iK2 series voltage 220VAC
Introduction: The powerful internal position mode of the new Shida/STEP universal bus servo iK2 series can plan multi-path continuous operation to achieve rich motion control functions; Support up to 32 groups of data planning, each group of data can be set according to the number of pulses or angles, and the amount can be set ...
|
|
Xinshida/STEP universal pulse type servo Ωs-AP2 single-phase AC220V
Introduction: Xinshida/STEP universal pulse servo Ωs-AP2 provides customers with a variety of Calling zero return modes to adapt to the zero return needs of different sites, and also provides 64 points of I/O point control function, which is suitable for customers to pass through different I/O without providing pulse control.
|
|
Xinshida/STEP network bus servo EM-C series 5-channel digital signal
Introduction: The excellent hierarchical structure of the new Shida/STEP network-based bus servo EM-C series enables the servo software equipped with MDP to run on different CPU hardware platforms, forming a single CPU control 1-8 axis servo products and the integration of bus technology; MDP is convenient for users to ...
|
|
Xinshida/STEP servo drive QXL I/O10 in and out of 9
Introduction: The new STEP servo drive QXL integrates the current world's cutting-edge servo control technology, and its excellent driving performance has reached the international level. Excellent extensibility, fast response, stable positioning, vibration suppression, automatic parameter design, programmability, convenient operation, saturation limit improvement...
|
|
Xinshida/STEP universal bus type servo Ωs-EN2
Introduction: Xinshida/STEP universal bus servo Ωs-EN2, Ωs-EN1 series servo drive can cover servo motors with a power of 2kW-22kW. Support EtherCAT bus communication, communication rate 100Mbps; It can realize precise position, speed, torque control, and has excellent control ...
|
|
The AS610 inverter is rated at ≥ 0.93
Introduction: Xinshida/STEP inverter AS610
Features:
High reliability design
Reliable thermal design
High seismic resistance
High degree of protection
Ultra-low noise operation design
It has a DC input anti-reverse circuit design
Advanced...
|
|
Xinshida/STEP universal bus type servo iKAS series 6-channel output
Introduction: Powerful internal position mode can plan multi-path continuous operation to achieve rich motion control functions; It can support 32 sets of data planning, each group of data can be set according to the number of pulses or angles, and the speed, acceleration, and deceleration of the internal position mode can be set.
|
|
Xinshida/STEP universal bus type servo Ωs-AN1 communication rate 100Mbps
Introduction: Xinshida/STEP universal bus servo Ωs-AN1 can cover servo motors with a power of 0.2kW-7.5kW. Support EtherCAT, CANOpen bus communication, communication rate 100Mbps; The frequency response of the current loop is 2kHz, and the frequency response of the velocity loop is 1.6kHz.
|
|
Xinshida/STEP servo 80SS series rated current 4A-4.9A
Introduction: Xinshida/STEP servo 80SS series, rated power: 750W-1000W
Product parameters
Rated power: 750W——1000W
Number of pole pairs: 5
Rated torque: 2.39N.m——3.18N.m
Maximum torque: 7.2N.m——9. ...
|
|
Xinshida/STEP servo motor 150ST input voltage 220V
Introduction: Xinshida/STEP servo motor 150ST
Product parameters
Power range: 3.0kW - 5.5kW
Input voltage: 220V
Rated line current: 14A-27A
Rated speed: 2000PRM-2500RPM
Rated torque: 15N ...
|
|
Xinshida/STEP Motion Controller SC30-B6L RAM capacity 1G
Introduction: Xinshida/STEP motion controller SC30-B6L, medium-sized PAC, integrated control, one-stop connection, one-platform design; Based on the CoDeSys platform, it fully supports the IEC61131-3 standard programming language; Support configuration programming, support EtherCAT, CANOpen, Etherne...
|
|
Xinshida/STEP universal pulse servo G3 series Modbus protocol
Introduction: Xinshida/STEP universal pulse servo G3 series high-precision position clamping function, after the driver detects that the specified position has been reached, the command is output through the IO port. The infinite operation absolute function allows the encoder to clear the number of turns by a pre-set upper limit.
Give birth...
|
|
Xinshida/STEP universal bus type servo Ωs-EN1 position control cycle 100μs
Introduction: Xinshida/STEP universal bus servo Ωs-EN1 can cover servo motors with a power of 0.2kW-22kW. Support EtherCAT, PowerLink, CANOpen bus communication, communication rate 100Mbps; Precise position, speed, torque control and superior control
|
|
The new STEP Motion Controller AMC1600C-A06 has a capacity of 512MB
Introduction: Xinshida/STEP Motion Controller AMC1600C-A06, special aircraft motion controller; Based on the CoDeSys platform, it fully supports the IEC61131-3 standard programming language; Support configuration programming, support EtherCAT, CANOpen, EthernetIP and other industrial fieldbus protocols ...
|
|
Xinshida/STEP DDR motor servo drive QXR
Introduction:Xinshida/STEP DDR motor servo driver QXR Xinshida QXR series high-performance pulse DDR motor servo driver integrates the current world's cutting-edge servo control technology, and its excellent driving performance has reached the international leading level.
Features:
Scalable performance ...
|
|
Xinshida/STEP servo motor 80SD
Introduction: Xinshida/STEP servo motor 80SD
Product parameters
Rated power: 750W——1000W
Number of pole pairs: 5
Rated torque: 2.39N.m——3.18N.m
Maximum torque: 7.2N.m——9.54N.m
Rated speed: 3000 ...
|
|
Xinshida/STEP universal pulse type servo G series power supply voltage 220VAC
Introduction: Xinshida/STEP universal pulse servo G series adopts new digital signal processor (DSP) and intelligent power module (IPM), advanced control algorithm, to achieve high-precision control of permanent magnet synchronous motor, intelligent PID control algorithm and PDFF controller combined, improve the position and ...
|
|
Contact
working hours
