Xinshida/STEP servo motor 100B

Introduction: Xinshida/STEP servo motor 130ST series, servo motor, AC servo motor, permanent magnet AC servo motor Product parameters Power range: 1.8kW - 2.3kW Input voltage: 220VAC (-15-+10%), 50-60Hz Forehead...

Introduction: Xinshida/STEP servo motor 180B, photoelectric pulse encoder/absolute encoder/resolver Product parameters Rated power: 2.9kW - 7.5kW Rated line voltage: three-phase 380VAC (-15-+10%), 50-60Hz Forehead...

Introduction: Xinshida/STEP multi-axis servo Ωm-N1 is a multi-axis product launched by Sigriner, including rectifier unit (AC200V), three-axis integrated and four-axis integrated drive unit (DC300V). The rectifier unit and drive unit can be flexibly configured. The system adopts EtherCAT bus communication, supporting ...

Introduction: Xinshida/STEP 110B servo motor, AC servo motor, permanent magnet AC servo motor Product parameters Rated power: 0.4kW - 1.2kW Rated line voltage: 220VAC (-15-+10%), 50-60Hz Rated line current: 2. ...

Introduction: Xinshida/STEP servo motor 110ST Product parameters Power range: 1.3kW - 1.7kW Rated line voltage: 220VAC (-15-+10%), 50-60Hz Rated line current: 6.5A——9.5A Rated speed: 2500 ...

Introduction: Xinshida/STEP servo motor 180ST Product parameters Power range: 2.7kW - 4.5kW Input voltage: single-phase/three-phase 220VAC/380VAC (-15-+10%), 50-60Hz Rated line current: 10.5A——16A (220V A ...

Introduction: Xinshida/STEP servo 60ST Product parameters Power range: 200W-600W Rated line voltage: 220VAC (-15-+10%), 50-60Hz Rated line current: 1.2A——3.5A Rated speed: 3000rpm ...

Introduction: Xinshida/STEP servo motor 40E, servo motor, AC servo motor, permanent magnet AC servo motor Product parameters Rated power: 50W-100W Rated line voltage: DC 48V/AC220V Rated line current: 48V 1.1A——2.5A ...

Introduction: Xinshida/STEP inverter AS610 Features: High reliability design Reliable thermal design High seismic resistance High degree of protection Ultra-low noise operation design It has a DC input anti-reverse circuit design Advanced...

Introduction: Xinshida/STEP universal bus servo Ωs-EN2, Ωs-EN1 series servo drive can cover servo motors with a power of 2kW-22kW. Support EtherCAT bus communication, communication rate 100Mbps; It can realize precise position, speed, torque control, and has excellent control ...

Introduction: Xinshida/STEP servo motor 80ST Product parameters Power range: 0.4KW-1KW Rated line voltage: 220V Rated line current: 2A——3A Rated speed: 2000RPM-3000RPM Rated torque: 1.27N ...

Introduction: Xinshida/STEP multi-axis servo K1AD series mechanical resonance frequency analysis, equipped with two sets of notch filters, adjustable frequency (50-5000Hz) and notch depth, effectively overcome low-frequency resonance and vibration at the end of the machine, can set the vibration frequency (1-100Hz) and vibration damping. ...

Introduction: Xinshida/STEP universal pulse type AC servo drive Ω6 Features: Self-tuning, free debugging, saving 90% of equipment debugging time; Speed loop bandwidth: 3.5kHz; Current loop refresh rate 1MHz; Three 16-bit analog command inputs can ...

Introduction: Xinshida/STEP universal pulse servo G2 series adopts new digital signal processor (DSP) and intelligent power module (IPM), advanced control algorithm, to achieve high-precision control of permanent magnet synchronous motor; The combination of the intelligent PID control algorithm and the PDFF controller improves the position ...

Introduction: Powerful internal position mode can plan multi-path continuous operation to achieve rich motion control functions; It can support 32 sets of data planning, each group of data can be set according to the number of pulses or angles, and the speed, acceleration, and deceleration of the internal position mode can be set.

Introduction: Xinshida/STEP servo motor 130SD servo motor, AC servo motor, permanent magnet AC servo motor Product parameters Rated power: 1kW-3kW Number of pole pairs: 5 Rated torque: 4.77N.m——14.3N.m Maximum torque: ...

Introduction: Xinshida/STEP motion controller SC30-B6L, medium-sized PAC, integrated control, one-stop connection, one-platform design; Based on the CoDeSys platform, it fully supports the IEC61131-3 standard programming language; Support configuration programming, support EtherCAT, CANOpen, Etherne...

Introduction: Xinshida/STEP universal bus servo Ωs-EN1 can cover servo motors with a power of 0.2kW-22kW. Support EtherCAT, PowerLink, CANOpen bus communication, communication rate 100Mbps; Precise position, speed, torque control and superior control

Introduction: Xinshida/STEP universal pulse servo G3 series high-precision position clamping function, after the driver detects that the specified position has been reached, the command is output through the IO port. The infinite operation absolute function allows the encoder to clear the number of turns by a pre-set upper limit. Give birth...

Introduction:Xinshida/STEP DDR motor servo driver QXR Xinshida QXR series high-performance pulse DDR motor servo driver integrates the current world's cutting-edge servo control technology, and its excellent driving performance has reached the international leading level. Features: Scalable performance ...