Product Introduction: Parameterization of the SmartRunner Detector is very simple. The laser line of the vision sensor is projected onto the desired background and programmed using teach-in. With the Data Matrix control code, the user can set additional parameters, such as the detection area, without a PC. The zone monitoring sensor detects any deviation in the defined detection area, i.e. an object that reflects light, making it invisible. Since the SmartRunner detector can evaluate both the laser line on the object and the background, the sensor results are reliable in these situations.
Specifications:
Product Description | Laser sensors for on-site monitoring |
General characteristics | Measuring range | X = 40 ... 310 mm ； Z = 60 ... 700 mm | The type of light source | Laser diodes | The type of light source | Red laser + built-in LED flash Red 650 nm | Laser ratings | | | Laser class | 1 | | wavelength | Measuring laser: 660 nm | | Laser surveillance | When the laser current is too high, the safety system shuts off the laser | Scanning speed | 10 s-1 | Functional safety parameters | Mean time to failure (days) | 20 a | Service life (...) Month... days) | 10 a | Scope of diagnosis | 0 % | Indicator/Action key | Function display | Trigger: Yellow LED ; Objects within the evaluation range: LED red/green | controller | 2 buttons | Electrical characteristics | Operating voltage | 24 V ± 20% , PELV | interface | Interface type | RS 485 interface | agreement | Binary code | input | threshold | Low: < 2.5 V, High: > 8 V | output | Switch type | PNP | Conformity with the system of standards and norms | Meets standards | | | Anti-interference | EN 61000-6-2:2005 | | Radiated interference | EN 61000-6-4:2007/A1:2011 | | Ingress protection | EN 60529 | | Shock and shock resistance | EN 60068-2-27:2009 | | Laser class | IEC 60825-1 | Licensing and Certification | CCC certified | Products with a maximum operating voltage of 36 volts do not need to be certified and therefore do not need to be equipped with the CCC-mark. | authentication | CE | Mechanical properties | Ingress protection | IP67 | connect | 8-pin M12 x 1 connector (Power + RS485 + Input/Output); Swivel 90° ; Grounding : Grounding clamp for PCV systems | material | | | Optical end faces | Plastic lenses |
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
P+F/NJ1.5-PD-E02-1.250-V95 1,5mm
Introduction: NJ1.5-PD-E02-1.250-V95 inductive sensor proximity switch adopts 4-wire DC anti-welding interference design, the sensing range is 1.5mm, and the rated value is 3000psi.
Product Details
Switch function ...
|
|
P+F inductive sensor NBN5-F7-E0 5 mm non-flush
Introduction: P+F inductive sensor NBN5-F7-E0 5 mm non-flush, switch function normally open (NO), output type NPN, rated working distance 5 mm, installation non-flush, output polarity DC, ensure operating distance 0 ... 4,05 mm
...
|
|
P+F/KCD2-E2L sensor output interface terminal
Product Introduction: P+F Sensor Output Interface Terminal KCD2-E2L Sensor Output Interface Terminal with Wire Disconnection Monitoring[/backcolor]
Indicator/Operation Method:
Yellow LED: Switch output Wire disconnects: LED off, output locked
Electrical Technical Specifications: ...
|
|
Germany P+F/Bejiafu capacitive sensor CJ15+U4+A2 four-wire DC
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F Capacitive Sensor CJ40-FP-A2-P1 40mm
Introduction: P+F capacitive sensor CJ40-FP-A2-P1 40 mm, non-flush; 4-wire DC; The switching distance can be set over a wide range using a potentiometer. Up to two conductors with the same core cross-sectional area can be installed with one terminal connector.
...
|
|
P+F Zener Barrier Z System DIN rail mounting
Introduction: P+F/Plus Forziner Barrier - cost-saving, easy to install explosion protection
Product Details
Zener barriers provide cost-effective explosion protection for a wide range of applications in process automation systems. Transferred to a dangerous place ...
|
|
P+F Retroreflective Sensor ML100-55/95/102 5m detection range
Description: Retroreflective sensor ML100-55/95/102 photoelectric sensor with polarization filter, plastic housing, 5 m detection range, red light, adjustable sensitivity, light/dark, DC type, NPN output, M8 plug.
...
|
|
P+F/Inductive sensor NBB20-L2-A2-V1 flush mounted
Introduction: Smooth or threaded stainless steel housing for inductive sensors; reverse polarity protection and short circuit protection; LED status indication; M8, M12 connector connection or terminal wiring; PVC, PUR or silicone cable outlet; 2-wire, 3-wire, 4-wire DC, AC, NAMUR and AS ...
|
|
P+F/Double Sheet Sensor UDC-18GM50-255-3E1 Current < 65 mA
Product Introduction: Ultrasonic double sheet detector is used to automatically and at high speed to distinguish substrate materials, labels, sheet-fed and double-fed, so as to protect the machine from waste in the production process. The whole system consists of an ultrasonic transmitter, an ultrasonic receiver and an external or built-in ...
|
|
P+F/GZ Sensor GL10-RT / 30 / 40A / 98A
Product introduction: There is a special through-beam sensor in our products called fork sensor. It is mainly used in places where the measurement distance is short. Since only one device requires wiring, fork sensors have the advantage of being easy to install compared to standard control sensors. ...
|
|
P+F Inductive Sensor NBN30-U1-E3 30mm non-flush
Introduction: Standard inductive sensor product features: smooth or threaded stainless steel cylindrical housing; reverse polarity protection and short circuit protection; LED status indicates M8, M12 connector connection or terminal wiring mode; PVC, PUR or silicon cable outlet; 2-wire, 3-wire, 4-wire DC, AC, ...
|
|
Germany P+F/Capacitive sensor CBB4-12GH60-E0-V1 with a voltage drop of ≤ 2,5 V
Description: Germany P+F/Capacitive sensor CBB4-12GH60-E0-V1 Voltage drop≤ 2,5 V, output type: PNP, reverse polarity protection: reverse polarity protection, no-load current: ≤ 12 mA
peculiarity
4 mm, flush
The working distance can be adjusted via a potentiometer
...
|
|
P+F/Switching Amplifier KFD2-SOT3-Ex2 24V DC
Introduction: The K-series isolation barriers provide users with a comprehensive solution to ensure reliable & economical signal transmission between field devices and control rooms. Whether the user selects a single signal isolation module or performs large-scale system integration, the K Series ...
|
|
P+F/Double Blessing Inclination Sensor INY030D-F99-B16-V15 weighs 240g
Description: Inclination sensors reliably detect inclination in factory automation and mobile device applications, making them the ideal solution for leveling mobile work platforms, for example. The sensor is able to continuously monitor the tilt angle of the platform and indicate when it is necessary to readjust the ...
|
|
P+F Isolation Barrier K Series 35mm DIN Rail
Introduction: The widely used K series intrinsically safe isolation grid adopts DIN rail installation, which is flexible and convenient. The intrinsically safe barriers of the K series can be easily plugged into the power rails assembled with the DIN rails. This installation method can greatly save ...
|
|
P+F/Gasford accelerometer F99 series measuring range -2~+ 2 g
Introduction: The F99 series of accelerometers is a complex mechanical system that uses accelerometers to ensure accurate real-time monitoring of the machine's vibrations. Accelerometers detect wear and tear on machine components and any critical operating conditions. Thus guaranteeing the execution of corrective actions to avoid potential damages.
|
|
P+F/Through-beam GD18 / GV18 /115/120
Product Introduction: Thru-beam sensor, M18 threaded housing design, plastic housing, front optical surface, 20 meters detection distance, red light, light and dark, DC version, 2 PNP outputs, fixed cable, high efficiency line, short M18 plastic housing application, very high detection range, 4 LED fingers...
|
|
P+F/Inductive sensor NBB2-12GM50-E2-V1 2 mm
Summary: Inductive proximity sensors are the preferred product for most applications that require the precise and non-contact detection of metal objects in mechanical or automated equipment. As a pioneer and market leader in the field of sensors, we offer our customers innovative, high-quality electrical products.
|
|
P+F/Optical Fiber Optic Sensors SU18/16/35/40a/110/115/126a
Product Introduction: Fiber Optic Sensors for Glass and Plastic Fibers, Basic Production Line for DIN Rail Mounting, High Power Version, Sleek Design, Selectable 3 Response Times, Mutual Interference Prevention (No Crosstalk)
Detailed parameters:
...
|
|
P+F/Inductive sensor NBB20-L2-E2-V1 20mm
Introduction: Smooth or threaded stainless steel housing for inductive sensors; reverse polarity protection and short circuit protection; LED status indication; M8, M12 connector connection or terminal wiring; PVC, PUR or silicone cable outlet; 2-wire, 3-wire, 4-wire DC, AC, NAMUR and AS ...
|
|
Contact
working hours
